Hi, nice to have a place that matches my problem and a lot of same trouble. Mine is a Mercedes ML 350 2006, same SAM module got wet a rust, I pull it off and washit with alcohol, test the relays and they also worked fine, My question is that anyone know what the relays do? Thanks and happy repairs!!
Hi, nice to have a place that matches my problem and a lot of same trouble. Mine is a Mercedes ML 350 2006, same SAM module got wet a rust, I pull it off and washit with alcohol, test the relays and they also worked fine, My question is that anyone know what the relays do? Thanks and happy repairs!!
Great Video, Very skilled work on the PCB Very Very Good. Do you have a diagram of what the individual components control...For example where on the board controls the boot lock, or Turn indicators?
@@PORepair Thank you very much for the prompt reply...I had a problem with my ML280 indicators and Boot latch I watched your video as I had opened my sam and had cleaned a few small spots of water ingress but no great indicators of any other problems...I dried and reassembled and refitted the unit and I was happy that the bot and indicators were working again but after I had tidied up the boot I tried again and lo and behold the same problem happened again. so back to the drawing board I do have your details now I am in France at the moment and was hopping to return in early January so I may be back in touch. Perseverance commands success Happy xmas (if Possible)
@@creativewebmedia-uk Hi, nice to have a place that matches my problem and a lot of same trouble. Mine is a Mercedes ML 350 2006, same SAM module got wet a rust, I pull it off and washit with alcohol, test the relays and they also worked fine, My question is that anyone know what the relays do? Thanks and happy repairs!!
my car wont crank only thing that has water damaged was from left side of trunk not sure what it is. maybe for radio.. no signs of corrosion on all other ecu modules . any help?
Hi i get a problem with my sam rear. When i pull on my car dosnt start and then when i pull of it start and Can go any where you want without principal door lock,signal direction and breack Please help me to solve this pb
Hi, this was great to watch. I've got one of those (w164 2008) and looks like it needs this exact type of refurbishment. I live in mexico, can you help me? Contact info? Thx in advance.
Hi I had similar issues with my 2007 ML280 and was able to clean the corrosion from the water damage with some PCB spray and a brush. I got full functionality to the windscreen wipers, indicators, rear door release and keyless entry but was unable to restore the fuel gauge and seat controls. Do you have any suggestions how I can repair further? Thanks
Hi, nice to have a place that matches my problem and a lot of same trouble. Mine is a Mercedes ML 350 2006, same SAM module got wet a rust, I pull it off and washit with alcohol, test the relays and they also worked fine, My question is that anyone know what the relays do? Thanks and happy repairs!!
I use a conductivity enhancer sold by the Conduct-O-Lube group. You need to address all points of corrosion & possibly bad connection. In nearly all cases you can completely restore your MB to full serviceability.
@@PORepair I live in Nigeria but I can get it across to you please send me an email at fotadekunle@yahoo.com with your full address and estimated cost of repairs. Thanks.
@@olufemiadekunle1966 Hi, nice to have a place that matches my problem and a lot of same trouble. Mine is a Mercedes ML 350 2006, same SAM module got wet a rust, I pull it off and washit with alcohol, test the relays and they also worked fine, My question is that anyone know what the relays do? Thanks and happy repairs!!
Holy Hell Batman. Did you really just repair it like that or was that some Harry Potter s…? It looks like everything just melted back together. Where are you located and can we send ours in? Both my front and rear are destroyed… thanks Mercedes 😡
@@PORepair стоп сигналы не работают ну и там на самой плате у одного чипа на корпусе откололся кусочек могу фото скинуть только подскажите куда и ещё на одном контакте цветение видать вода попала но чуть-чуть
![ภาพนี้ก็ฮาเหมือนกันนะเนี้ย #2 SS8 [ พากย์นรก MEME.EXE ] | easy boy](http://i.ytimg.com/vi/RMhUgxxD49Q/mqdefault.jpg)
Great to watch 👀 , thanks for posting!
Wow, impressive video repairs
Hi, nice to have a place that matches my problem and a lot of same trouble. Mine is a Mercedes ML 350 2006, same SAM module got wet a rust, I pull it off and washit with alcohol, test the relays and they also worked fine, My question is that anyone know what the relays do? Thanks and happy repairs!!
amazing job
Good work bro
Brilliant! I need help please. The rear Sam of my 2007 320 CDI is a gonner. Can't afford a replacement. Where can I send the broken?
read description and will see all needed information to find me.
Hello, i repairing a 2006 slk 280 rear sam and am having a hard time getting it all apart any hints would be helpful. thanks
Hi, nice to have a place that matches my problem and a lot of same trouble. Mine is a Mercedes ML 350 2006, same SAM module got wet a rust, I pull it off and washit with alcohol, test the relays and they also worked fine, My question is that anyone know what the relays do? Thanks and happy repairs!!
Great Video, Very skilled work on the PCB Very Very Good. Do you have a diagram of what the individual components control...For example where on the board controls the boot lock, or Turn indicators?
sorry i don't have any pcb diagrams
@@PORepair Thank you very much for the prompt reply...I had a problem with my ML280 indicators and Boot latch I watched your video as I had opened my sam and had cleaned a few small spots of water ingress but no great indicators of any other problems...I dried and reassembled and refitted the unit and I was happy that the bot and indicators were working again but after I had tidied up the boot I tried again and lo and behold the same problem happened again. so back to the drawing board I do have your details now I am in France at the moment and was hopping to return in early January so I may be back in touch. Perseverance commands success Happy xmas (if Possible)
@@creativewebmedia-uk check Plugs, some time water is inside them and you cant see.
@@PORepair Thanks for the additional tip Wildo. :-)
@@creativewebmedia-uk Hi, nice to have a place that matches my problem and a lot of same trouble. Mine is a Mercedes ML 350 2006, same SAM module got wet a rust, I pull it off and washit with alcohol, test the relays and they also worked fine, My question is that anyone know what the relays do? Thanks and happy repairs!!
my car wont crank only thing that has water damaged was from left side of trunk not sure what it is. maybe for radio.. no signs of corrosion on all other ecu modules . any help?
check front sam unit under front seat near battery
Hi i get a problem with my sam rear. When i pull on my car dosnt start and then when i pull of it start and Can go any where you want without principal door lock,signal direction and breack Please help me to solve this pb
Hi, this was great to watch. I've got one of those (w164 2008) and looks like it needs this exact type of refurbishment. I live in mexico, can you help me? Contact info? Thx in advance.
hello, thanks, all contact info in description
Hi
I had similar issues with my 2007 ML280 and was able to clean the corrosion from the water damage with some PCB spray and a brush. I got full functionality to the windscreen wipers, indicators, rear door release and keyless entry but was unable to restore the fuel gauge and seat controls. Do you have any suggestions how I can repair further?
Thanks
Did you check damage under the plugs? usually water gets there and shorts capacitors ans some more stuff
Hi, nice to have a place that matches my problem and a lot of same trouble. Mine is a Mercedes ML 350 2006, same SAM module got wet a rust, I pull it off and washit with alcohol, test the relays and they also worked fine, My question is that anyone know what the relays do? Thanks and happy repairs!!
@@PORepair hello. I have the same Problem with my sam. Can you give me your contact please?
@@Paraglidingworld hi, read description.
I use a conductivity enhancer sold by the Conduct-O-Lube group. You need to address all points of corrosion & possibly bad connection. In nearly all cases you can completely restore your MB to full serviceability.
i have an 2006 slk 280 rear sam that needs repaired, the key fob doesnt work, cruise control and ABS, can i get your contact info
hello just contact me on mail lagas.tmp@gmail.com
Stumbled onto this video and have issues as well. Can we send you the unit for inspection and cleaning? Thank you in advance
yes you can, please contac me, check descripsion for more info
WOW MASTER CLAAAAAAAAS 👏🏻👏🏻👏🏻👏🏻👍🏻
Problema con los assentos
I have a 10 gl450 can I send my SAM to you for repairs?
hello check description and contact me and we see if i can help. thanks
@@PORepair
I can’t send an email those addresses for some reason.
Hi, I need to repair a similar Rear Sam for an 07 R350 can you help me repair it?
yes i can help.
@@PORepair I live in Nigeria but I can get it across to you please send me an email at fotadekunle@yahoo.com with your full address and estimated cost of repairs. Thanks.
@@olufemiadekunle1966 Hi, nice to have a place that matches my problem and a lot of same trouble. Mine is a Mercedes ML 350 2006, same SAM module got wet a rust, I pull it off and washit with alcohol, test the relays and they also worked fine, My question is that anyone know what the relays do? Thanks and happy repairs!!
@@PORepair Hi are you still repairing Sam units? I have one in need of a repair.
@@plal333 yes i do
PO Electronics Repair
Nilas lacas
Holy Hell Batman. Did you really just repair it like that or was that some Harry Potter s…? It looks like everything just melted back together. Where are you located and can we send ours in? Both my front and rear are destroyed… thanks Mercedes 😡
hey, just contact me with email in description, and give me some more details.
Есть кто сможет мне починить блок Sam?????
А што сним? Подробно напиши на емаил
@@PORepair стоп сигналы не работают ну и там на самой плате у одного чипа на корпусе откололся кусочек могу фото скинуть только подскажите куда и ещё на одном контакте цветение видать вода попала но чуть-чуть
@@user-cc3wk5fc4v проверьте информацию под описанием видео, и вы найдете всю необходимую информацию, чтобы связаться со мной
algun numero de whatsapp para contacto