Whomever came up with this design did an absolutely fantastic job and it is just beautiful!! I would love to have a table like this to go in my dining room! Bur glass for the top and we would be eating off of it daily and enjoying the beauty of it every time we pass it! I do LOVE this!!!!! Congratulations and best wishes to the makers!
It's a beautiful table but I'd have a very difficult time trying to keep my cards, chips and beer on the table after about the sixth beer. Also if any of the ladies playing cards with you were wearing short skirts it would make the game a lot more rigid, er, a.......I mean fun.
Wykonanie efekt i dokładność przerasta wszelkie możliwe oczekiwania. Nic nie można zakwestionować tylko oddać wielki szacunek za pietyzm wykonania wszelkich urządzeń jakie oglądam z wielkim zainteresowaniem. Chylę czoła. Wielki szacunek z mojej strony. Pozdrawiam i życzę następnych efektów tej żmudnej ale jak pięknej pracy
I love the design but it is impractical as a coffee table. Cups placed on the table would be unstable unless precisely positioned. People like to be able to put a cup down without having to pay too much attention. This could be addressed with a thick glass top which would provide a stable surface and still reveal the beautiful structure beneath... it would also be easier to clean.
what kind of glue do they use? it looks like some kind of past. it would be nice if they would somehow show what the size each piece of wood they cut or work with. so, we would know. you know we hope to make something as grate as these master's do. help us out.
I shudder every time I see someone using a bandsaw with the upper guide block/bearings so far above the workpiece. The blade tracks far better the closer to the cut line as well is much safer, preventing losing fingers, hands etc. Just saying. I think that is the first thing you would be taught if you had lessons on the safe operation of a band saw.
So beautiful, but perhaps difficult to safely use as a coffee table ? Could long slender triangle pieces of a contrasting dark wood be inserted between the spokes to fill in the spaces? Anyway, it is unique and lovely as it is ,with a very stable base.
The glue up of the pine arcs used epoxy apparently. Good idea for strength, he then used butt joints for assembly. That joint is structurally the weakest joint in woodworking. Bad craftsmanship from a talented craftsman
I'm sorry but I can't believe all the work that went in to this table only to see all the scabbed in pieces instead of just cutting 4 more small pieces to replace the ones he glued together to make it work. As a woodworker video lacks details that a carpenter would throw a fit with. Go back cut those scabbed in pieces out and replace them with a single small piece so it doesn't look like sub quality workmanship. Don't just slap it together think about correcting the mistakes as you go. I know you can do better than this, take your time to do it right.
Some will remember the time when knotty pine was everywhere.
SIN PALABRAS EXCELENTE DE ARGENTINA UN GRAN SALUDOS PARA TODO EL PERSONAL. DE TRABAJO...
It’s not the materials . It’s not the tools. It’s the brain and the hands that brilliantly and skillfully achieve this finish.
An intricate piece of woodwork congratulations
Beautiful work and beautiful table! Different than every other coffee table!🎉😊❤!
I wear ratty clothes to do woodworking but this guy dresses up and stay clean! Bravo!!!
Hola q hermoso trabajo. Eres muy ingenioso. Mis respetos. Felicidades desde Colombia ❤❤❤🇨🇴🇨🇴🇨🇴🇨🇴🇨🇴👍👍👍👍👍👍👍👍👍🙏🙏🙏🙏🙏🙏Ana María
Amazing work! I love the way this was made. Thanks for sharing!!
very nice great job
Nice design, if only it wasn't a rush job! It could look and be a lot better.
Zip it.
Very nice work beautiful 😅
Great work
Whomever came up with this design did an absolutely fantastic job and it is just beautiful!! I would love to have a table like this to go in my dining room! Bur glass for the top and we would be eating off of it daily and enjoying the beauty of it every time we pass it! I do LOVE this!!!!! Congratulations and best wishes to the makers!
Beautiful design. Thank you.
Wonderful commander! Great work of art!! Congratulations! 👋👋👋🇧🇷🇧🇷🇧🇷👍👍👍Thank you!
Un vrai objet d'art. Félicitations.
The guard to the band saw should only be 1/4 inch above the wood
The guide
Very nice l like it❤❤❤❤
Un trabajo muy original👍
Creative video, thanks :)
Gostei muito linda parabéns Jacareí SP Benedito
So beautiful
Glass top will look better
It is amazing
I would have filled the top with resin so that the whole table is usable and nothing can fall in between.
It's a beautiful table but I'd have a very difficult time trying to keep my cards, chips and beer on the table after about the sixth beer. Also if any of the ladies playing cards with you were wearing short skirts it would make the game a lot more rigid, er, a.......I mean fun.
Nice design,You should also put the round glass, no falls small item when you sit beside the table.
I love it but I would put a glass top on it to protect the wood .
😢 Estupenda creatividad lo felicito 😮
Hermoso trabajo. 👍👍👍👍🇨🇴🇨🇴🇨🇴🇨🇴🇨🇴
Beautiful and creative
Cody not bad for a first attempt
У китайцев нашего леса дохрена! Крррасота, блин!!!
I love the part where he sits on artificial grass and sips colored water from a plastic cup
Superb & beautiful
Excelente trabajo full arte felicitaciones
Today , very few craftsmen can perform in a similar standard. Thanks
Wykonanie efekt i dokładność przerasta wszelkie możliwe oczekiwania. Nic nie można zakwestionować tylko oddać wielki szacunek za pietyzm wykonania wszelkich urządzeń jakie oglądam z wielkim zainteresowaniem. Chylę czoła. Wielki szacunek z mojej strony. Pozdrawiam i życzę następnych efektów tej żmudnej ale jak pięknej pracy
Incredible beauty-
Beautiful ❤😊
Love it
Impressionante como vocês transformam a matéria bruta em um trabalho lindo... Parabéns !
Conheço muitos profissional e gosto muito de reinar com madeira mas este trabalho é muito lindo parabens.
Beautiful
Lower the band saw blade guide closer to the work piece.
Excellent work!!
Beautiful!
Trabajo perfecto muy bonito
As an alternative to glass, one could fill the voids with resin. That would never risk to slide off.
Yes! I was hoping that would have happened
Incredible fit and finish- very Chinee.
Wow c'est vraiment magnifique felicitation mr jaime bcp votre savoir-faire merci de partager ❤❤❤
Harika 🙏👍
I love the design but it is impractical as a coffee table. Cups placed on the table would be unstable unless precisely positioned. People like to be able to put a cup down without having to pay too much attention. This could be addressed with a thick glass top which would provide a stable surface and still reveal the beautiful structure beneath... it would also be easier to clean.
Hey just have a round piece of glass placed on the top. That will make it a great coffee table.
Needs a glass top then it'll be good to go.
Ü
Yeah! It would have looked great if had put epoxy in all of those areas with maybe a metal rim
I agree it's very beautiful piece and it wouldn't take much resin to to do the top and it would last forever
Profunda perfeição 🎉 🎉 🎉...parabéns 🎉 🎉
magnifique !
Gorgeous table!! Way beyond my abilities! But thanks for sharing!!
I love this table!!!!
Hi Fantastic A Great Design For A Gorgeous Coffee Table Like It A Lot Great VIDEO
Definitely can appreciate the angles, but the finishing left alot to be desired...needed sanding badly
Maravilhosa👍👍👍👍
Fantastic!!
Fantástic Job my Friend! congratulations from Brazil!!
Amazing how tight and perfect all the joints are.
lol. the design is nice but it's been slapped together with little precision or care.
The Master Craftsman demonstrated how to make and use instruments to draw circles . His technique is very simple, yet , very accurate. Thanks
what kind of glue do they use? it looks like some kind of past. it would be nice if they would somehow show what the size each piece of wood they cut or work with. so, we would know. you know we hope to make something as grate as these master's do. help us out.
Beautiful!!!❤🎉😂
Bellísima
а что на нем можно делать? Вазу в центр поставить и все
Tek kelimeyle harika
I shudder every time I see someone using a bandsaw with the upper guide block/bearings so far above the workpiece. The blade tracks far better the closer to the cut line as well is much safer, preventing losing fingers, hands etc. Just saying. I think that is the first thing you would be taught if you had lessons on the safe operation of a band saw.
So beautiful, but perhaps difficult to safely use as a coffee table ? Could long slender triangle pieces of a contrasting dark wood be inserted between the spokes to fill in the spaces? Anyway, it is unique and lovely as it is ,with a very stable base.
👏👏👏👍💪🙏
Concptgénial
Very good creation dear. You are a real craftsman in wood furniture design. Success and good luck.
Piękny🎉😊❤
Usted es un genio. Hizo usted una obra de arte.felicidades .
ya gonna put some glass onit?
Muy hermosa pero que lleva arriba un vidrio o que
Какой клей используете?
Trabalho muito bom
👏👏👏👏👏
Красиво но неудобно и бесполезно.
👍🏻👍🏻
❤❤❤❤❤
The glue up of the pine arcs used epoxy apparently. Good idea for strength, he then used butt joints for assembly. That joint is structurally the weakest joint in woodworking. Bad craftsmanship from a talented craftsman
Шуруп в торец бруска? И так сойдет....
brand of your band saw?
Incredible work! Great design and much respect to this Master Craftsman.
New sub here
😃
I'm sorry but I can't believe all the work that went in to this table only to see all the scabbed in pieces instead of just cutting 4 more small pieces to replace the ones he glued together to make it work. As a woodworker video lacks details that a carpenter would throw a fit with. Go back cut those scabbed in pieces out and replace them with a single small piece so it doesn't look like sub quality workmanship. Don't just slap it together think about correcting the mistakes as you go. I know you can do better than this, take your time to do it right.
Gute Idee, aber schlampige Ausführung.
What?! No glass on top of the table?
That's a lot of wasted wood.
Why wouldn’t you turn the board around and stack the arcs and use less wood?
Shhhhhhhh......
Vidrio de cubierta le llora...
25 min. - 34 sec. wasted
What wood adhesive are you using? 12:00
Meeh.
I'll pass.
Disappoiting result for all yhe work that went inro this....
Asian woodworking always looks naff
Nice concept. Poor finish. Built to fail.
This is bogus dude.