Thanks for filming this - it's a huge help for a DIY'er like me. You showed every step perfectly and narrated the process impeccably - I greatly appreciate your instructions and advice! May God bless you!
Easier way to install the impeller is to just place impeller on the driveshaft, then with gentle force the upper impeller housing over the impeller while rotating the driveshaft way easier to do, then trying to fit the impeller and housing together as one piece.
Thank you! And is the water coming out of the tell tale or just around the linkage? It's been a few years since I have worked on them but I would check the seals and also ensure it's not leaking anywhere where it shouldn't.
What are your thoughts about the Colosseum holding the clash and and Saint Louis coming to the schedule? Excited for auto club to be a short track in 2023? More real racing. And by the way the horsepower is not going to be 550. It's 650 so they are going to be faster
@@Tylnorton do you even need to have the cowl-mounted primer bulb, or can you put a plug in the fuel line? Doesn't the fuel tank primer bulb do the same thing?
Thanks for filming this - it's a huge help for a DIY'er like me.
You showed every step perfectly and narrated the process impeccably - I greatly appreciate your instructions and advice!
May God bless you!
Of course! Thanks for watching and commenting!
Easier way to install the impeller is to just place impeller on the driveshaft, then with gentle force the upper impeller housing over the impeller while rotating the driveshaft way easier to do, then trying to fit the impeller and housing together as one piece.
good point
Great video! Thanks! for your help.
Thank you! And No problem!
Awesome man!! I have water running out around the shift linkage , any idea’s what that could be
Thank you! And is the water coming out of the tell tale or just around the linkage? It's been a few years since I have worked on them but I would check the seals and also ensure it's not leaking anywhere where it shouldn't.
What are your thoughts about the Colosseum holding the clash and and Saint Louis coming to the schedule? Excited for auto club to be a short track in 2023? More real racing. And by the way the horsepower is not going to be 550. It's 650 so they are going to be faster
Very informative!
Question ! Where can I buy one of the pump bulbs that is on the motor ? The one you pump up before starting !
You could probably find them at walmart or a boat shop.
@@Tylnorton do you even need to have the cowl-mounted primer bulb, or can you put a plug in the fuel line? Doesn't the fuel tank primer bulb do the same thing?
Great video...thanks!
Thanks! and no problem!
Do you drain gear oil before replace IMPELLER
You can if you want to. I personally do since it makes it a bit light removing and reinstalling lower unit when I know gear oil needs to be replaced.
They were half inch on my 2015
Should place impeller on shaft first than press down on housing while turning shaft impeller will spin and seat into housing
First one with an actual 20 horse 4stroke
1👍👍👍
Done
It's called a stud
Diffenatly needs more experience before making ! Instruction guide
Very informative!
Done
Done
Done
Done