Components (as described in the video): 1) PIR Sensor for Motion Detector 2) Arduino UNO 3) L298 Motor Driver 4) DC Motor for opening and closing doors 5) Two LEDs => Red LED for timer => Green LED for PIR sensor motion detector 6) Two 100 ohm resistor
Thank you for replying to me. Today I have one more question. I don't know what's wrong but the door motor only runs one way while the red led is still on. Sorry I have to use Google translate English, hope you understand and please help me. Thanks a lot.
sir, we have to make this project with further improvement.. like wise keeping record of how many people have entered in it.. plzz sir give us solution..
Simulation ma motor stop ku ni ho rii kindly bta dai or implementation jo apna ki isma supply daina k bd bi motor on ni ha mean door close hi ha simulation ma aisa ku ho rha ha plzzzzz tell
@@MuhammadAnsar sir thanks for the swift reply. In real life usage there are few additional points that i request you to please solve. 1. The doors need to close softly. They cannot close this fast, else the glass doors would break. Maybe a variable PWM code to close and open the door would solve this. 2. To avoid breakage of the mechanical system, i request you to add 4 limit switches so the open and close position of the doors can be read by the arduino and the power to the motor stops. 3. The motors used are either 12volt or 24 volt with high current draw, so kindly consider that as well. Trying to incorporate this design in real life , so asking you for help. Regards.
السلام عليكم اخي محمد I am your brother from Tunisia I need a link to download Proteus 8 with it's licence to simulate Arduino projects I need your help and thank you for your interesting channel
Hello Sir, After Compiling the code it is showing, Sketch uses 2624 bytes (8%) of program storage space. Maximum is 32256 bytes. Global variables use 228 bytes (11%) of dynamic memory, leaving 1820 bytes for local variables. Maximum is 2048 bytes. And Not Showing The Address Of That File So How Can I Solve This Problem. Please Reply
Bhai Tum Toh Pakistan Ka Proud Ho👏👏👏👏💕Love From 🇮🇳🇮🇳INDIA..👍👍👍👌👌👌
thank you
Can we use other model Arduino ?
Components (as described in the video):
1) PIR Sensor for Motion Detector
2) Arduino UNO
3) L298 Motor Driver
4) DC Motor for opening and closing doors
5) Two LEDs
=> Red LED for timer
=> Green LED for PIR sensor motion detector
6) Two 100 ohm resistor
Is there another way without DVD ROOM? Please help me soon
Main door me kaunsa motor use ho sakta hai ??
Mere paas washing machine ka motor hai...
dc gear motor
ماشااللہ 👌👌👌👌👌
thank you
Hi from Indonesia wallaikumsalam alhamdulillah
welcome bro
Gracias por compartir conocimiento,te deseo mucha salud Muhammad
I want to use this project for my door. Is that OK?
ok
I connect 2 PIR sensor to pin A0 together but it doesn't work. Do I need to re-code it? please help me. Sincere Thanks
you have to change the pin in the code and upload the code
@@MuhammadAnsar I really don't know anything about programming. Can you help me?
Thank you for replying to me. Today I have one more question. I don't know what's wrong but the door motor only runs one way while the red led is still on. Sorry I have to use Google translate English, hope you understand and please help me. Thanks a lot.
Hello can i ask whats the type of that wire black and white , the cutted one ?
these are the wire for the jumper
Sir, in the video at time 15:20,you have Used a button in the keyboard.I didn't get which button is that.
Sukran for sharing of ideas sir. its great for all..
Thanks and welcome
Excellent💯👍
Thank you! Cheers!
Hello sir I simulated the code it worked but practically connected everything correctly but not working not even LED could come on
Hii Bro
Can you please provide this code in your description?
Nice video 💫
It will be very helpful in my project!✨
Thank you! ☺
code, Schematics and Proteus Simulation download link already in the description
Can we make this without adding Proteus simulation?? Like using only code and uploading with connection of required equipment
yes you can
Hi, Ansa. I just wondering where can I buy that door(model)?
where are you from?
@@MuhammadAnsar Where can I buy? I'm from Malaysia
Can we use 5V 1A power supply?
yes use this
Sir arduino k library proteous main nai kr skty kya secondly, hum yeah code kya proteous k sath keil ko connect kr k kr skty hain kya
kr skty hy
U R GREAT VERY NICE IDEA
Thank you! Cheers!
sir, we have to make this project with further improvement.. like wise keeping record of how many people have entered in it.. plzz sir give us solution..
Hello brother. That's amazing idea.
How much to get the full project report.
Check the video description
Can you send the out put of running code is there is
Check the video description
Sir ye sensor iron door pr use nhi hota kya
hota hy
@@MuhammadAnsar sir hmare project me door Ko leke ek problem create hui please aap apna no.de skte ho kya discuss krna tha
@@MuhammadAnsar sir please reply
mast banaya
thank you
apakah sensor pir bisa bekerja di ruangan yg gelap total?
Simulation ma motor stop ku ni ho rii kindly bta dai or implementation jo apna ki isma supply daina k bd bi motor on ni ha mean door close hi ha simulation ma aisa ku ho rha ha plzzzzz tell
Sir can you please design a circuit that uses a limit switch preventing the door from opening beypond a limit
yes i will try
@@MuhammadAnsar sir thanks for the swift reply. In real life usage there are few additional points that i request you to please solve.
1. The doors need to close softly. They cannot close this fast, else the glass doors would break. Maybe a variable PWM code to close and open the door would solve this.
2. To avoid breakage of the mechanical system, i request you to add 4 limit switches so the open and close position of the doors can be read by the arduino and the power to the motor stops.
3. The motors used are either 12volt or 24 volt with high current draw, so kindly consider that as well.
Trying to incorporate this design in real life , so asking you for help.
Regards.
Mashallah
thank you
Can i use 2 pir?
yes
@@MuhammadAnsar So how to connect it? please help me. Thank you
Hlo sir... I need to know that the information about circuit design
Check description
Sir here, can we replace PIR sensor to IR Sensor?
Can you send the running code if there is?
Check the video description
Can arduino work without connecting to PC or laptop?
Arduino without code not working
It didn't work for me. I'm using L298 motor driver widely used but not working. Motors are not spinning!
Ya for me also
Did you get the solution?
@@adarshnaik5505 work for me. check your pin sensor on Arduino IDE with your hardware. it's different
@Αngga Gintara your project work properly ?
waalaikum salam warohmatullahi wabarokatuh...
where can we get dvd room gate?
ABİ ALLAH BİN TÜRLÜ RAZI OLSUN
جزاكم الله خيرا
yoksa okul projesi mi
@@r0semary21 evet la nerden bildin
@@alpha8444 bende de var aynısı
@@r0semary21 hangi okul
Pls post code in ur website the link u given is not working its shows an empty page
السلام عليكم اخي محمد
I am your brother from Tunisia
I need a link to download Proteus 8 with it's licence to simulate Arduino projects
I need your help and thank you for your interesting channel
😱😱😍😍😍😍😍😍Jiyo pakistan
thank you
Sir can you please help me related to this project??
how can i help you
Sir, after uploading the Arduino program, you have used a button in the keyboard to open and close the dvd gate. I didn't get what button is that..
No brother only use the gate motor
What I used if dont have DVD gate
DC motor
@@MuhammadAnsar please tell rating also
@@MuhammadAnsar how to connect or control dc motor
Whenever i am trying to open the file on proteus i am getting an error message
" internal exception: access violation in module lxlcore DLL Proteus"
Sir door kayse bna hai
DVD room se
Thanks bro
welcome
Sir ir remot .eeprom.bt136.Ac dimmer ka project karo
ok bro
Assalamulaikum, hello sir.please can i whasap you? cause i cannot apply that code at adruino...please help me
wa alaikum assalam
yes
@@MuhammadAnsar sir why the pir sensor just open n close while have detect something on pir sensor..it just open n close,
Bro how to decor it??
👍👍
Sir can you share the project report
❤️
Sir, Plz post code
The code given in description is not opening...
hello bro, can i know how to get the door?
From an repairing shop only in 100 rs
Sir can you help me
Tell me how can I help you
@@MuhammadAnsar Where did you buy the DVD room gate sir
Bhai me ye video dekhna chahta tha but Start krte hi close kr diya
BHAI... Great project...
Bhai thodi aap ki Help chahiye... Kya aapka contact number mil sakta he..?
thank you
yes bro my whatsapp number +923378655465
@@MuhammadAnsar bro can I txt you today....
Sir how can I get code
check the video description
Hello Sir,
After Compiling the code it is showing,
Sketch uses 2624 bytes (8%) of program storage space. Maximum is 32256 bytes.
Global variables use 228 bytes (11%) of dynamic memory, leaving 1820 bytes for local variables. Maximum is 2048 bytes.
And Not Showing The Address Of That File So How Can I Solve This Problem.
Please Reply
Open the arduino and go to the file and open the preferences and select the
show verbose output during: [yes] compilation
engineering me bhi Arabic 🤦🤦
matalab banda kitana bhi padh le engineer doctor ban jay par ander se Maulana hi nilkata hai 🙇
Apnar contat number ta pete pari??
Hi sir
Do you have a telegram
I want ask you pls ?!