Can I Fix It this $330 Xbox Series X - Missing Pads?!
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- Buying things on Ebay don't always work out as they should! Today I took the gamble and paid a lot of money, to try and repair this Xbox Series X and make a profit. Hopefully we can do just that!
(Leigh) Uber Micro Repairs - @UberMicroRepairs
(Chris) iFix Consoles - @iFixConsoles
📞 Discord - / discord
📷 Instagram - / joeydoestech
🙋♂️ Twitter - / joeydoestech
Equipment I Use Daily:
🔧 Screwdriver Set - amzn.to/30vwPxI
🔬 Microscope - Andonstar AD407 amzn.to/3mKFUtL
🧮 Multimeter - amzn.to/3x8hei4
🖊 Soldering Iron - amzn.to/3po0yCK
🟦 Soldering Mat - amzn.to/3mKLY5k
🍼 Isopropyl Alcohol (IPA) - amzn.to/3BLVDj1
🖊 Solder Sucker - amzn.to/3iKx9Os
🧮 Multimeter - amzn.to/3x8hei4
💿 USB C Amp Meter - amzn.to/3iVpltm
📷 Overhead Camera - Canon 250D amzn.to/2OOgbnD
💡 Camera Lighting - amzn.to/3mLoNI9
Use this address if you would like to send me a gift, but please don't expect anything to be returned to yourself. This is not offered as a repair service, this is only for gifts to the channel and myself:
Joey Does Tech
PO Box 1933
Southampton
SO18 9QN
📓 Disclaimers:
All videos uploaded onto my channel are strictly for entertainment purposes only. If you want to follow along one of my guides or how to's, please bare in mind that anything damage caused to your belongings during or after the video is your responsibility. Please think carefully and ensure you are fully competent before attempting to carry out any instructions on my videos. Most importantly, enjoy watching 😁
Joey Does Tech is a participant in the Amazon EU Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission incomes by advertising and linking to Joey Does Tech.
#XboxSeries #ConsoleRepair #MicroSoldering
![Warhammer 40k: Space Marine 2 | เพื่อจักรพรรดิ ! [ตอนเดียวจบ]](http://i.ytimg.com/vi/4M0ckYMA4-U/mqdefault.jpg)
Joey is surprising me every video
Awesome job Joey, you did yourself proud here. Such a shame someone had to go full ham on this marvel of a machine
Thankyou pal for the kind words 😘 Couldn't believe how tough that screw was 😂
So someone paid a bunch of total amateurs to break their console even more, so an actual amateur with sim experience buys the console to fix it properly.
Hahaha it seems like that hey!
@@JoeyDoesTech A great fix. I’ve seen others knock those tiny components off the HDMI paths and leave them off. And you have a new tool to use 😀
I applaud you for refraining from bashing the previous attempt. Also of course for another good video. Keep it up!
Thanks Marcian :)
WHOLE SHAT!!! JOEY!!! Seriously impressive!! Your skills have grown by SO much. A true inspiration!
Adam thanks for the kind words mate! :)
Another great fix. Really love your enthusiasm when you fix them.
Thanks Nigel :)
Looking at the pads for the HDMI port brought back some memories, I did this 2 years ago trying to fix my broken PS4 and I never managed it. Sold the board & DVD drive as a pair in the end and put myself off ever attempting again. Until a week ago when with an Xbox One S, successfully replaced a HDMI Port for the first time. Felt Great, got a lot of motivation to try again from watching your videos.
Joey you are mastering the trace repair getting better.i probably would never attempt trace repair too small for me.
Haha wouldn’t say mastering but I’m getting there slowly!
Buying new tools for a project -- love it lol. Well done Joey!
Thanks bud :)
Let's Go, dude! Very nicely done and worth the risk! You'll love the Dremel, I've used mine so many times, it comes in super-useful! 👍
I could cry 😭😭 Happy tears :D I'm really looking forward to using it :)
Im sad for the owner who got scammed by those amateurs
Console : stripped screw
Joey : get me a dremel 😂
I had a similar issue, replaced the HDMI but the ground legs on the ports are ridiculously short. If you don't get the solder to flow all the way through it doesn't provide any anchor at all. I ended up scraping some of the ground plane and adding more solder plus some JB metal weld for good measure. I had to repair 7 traces, I didn't want to do it again lol! Great video showing awesome technique, I used to try and recreate the pads, but now I use this method and solder to the pins.
And this is exactly why you shouldn't throw a broken Xbox away, there's always a chance to bring it back to life.
Exactly that Quantic!
Fair play joey lad. Another great video and fix again!👊
Ah for that you needed the safety goggles🤣 Common man! What a great fix! Dremmel a screw, trace repair and now kt runs perfect and you also have a dremmel. And all of that in a mid week video. Nice! Thank you for the good entertainment.
Let's go Leon my guy! Thankyou for watching as always pal :)
Great video good man for not judging the previous repair 👍
Thanks Jayden, we've all been there :)
Well done man luckily it was only a butchered hdmi port 👍 Love the videos
Tip for a stripped screw, you can use the dremmal but just put a notch in the top and use a flat head to unscrew it
😍 that feeling he joey! Nice fix, congrats
Thanks bud :)
Awesome repair! Nice editing too! 🙂
Hey thanks! :D
Yes Joey, very nice win if I may say so and look at those port swaps now from a while ago just cruising through them with the breeze in your hair.
Many thanks for the name drop too much love mate although I'm sure many would agree that you sir are the legend 😉🥰🥰.
Thankyou for the help mate. It's honestly much appreciated, and I know I'm a pain >.< I'll hang onto this hair as long as I can that's for sure! :)
Fantastic job Joey!
that was really intense ... man! good job
Thankyou Ethan!
Couple of tips on the failed screw. Try a rubber band in the space with a Philip's head screw driver or dremel a straight line on the screw head to enable a flat head onto to unscrew. Saves trying to remove the thread. Great video as always.
Thanks bud, I tried but I messed it up haha. Next time I’ll have a bit of practice :)
congrats! joey well done
man i get so chuffed for you when you actually fix it! good video man i enjoyed it. im not sure if i preferred you not talking haha ;)
Hahaha, appreciate it pal :)
Very very nice fix ones again Joey. I love your excitement when your fixing stuff. Keep up the positive vibe 👍
Thanks Virgil :)
Way to go joey been knocking it out the park lately its good to see your growth and how comfortable you have gotten at these kinds of fixes.
Thankyou Dak :) I'll mess up soon haha!
@@JoeyDoesTech lol noone is perfect your doing great
I believe the two missing diodes are filters and not important if I heard the Cod3r correct
A set of small Ez-Outs are essential for buggared and fubar'd screws stuck in place, use your dremel or a fine drill smaller than the thread width and drill a hole in the hex head area down then get your ez-out, tap it in til its solid then use a wrench or adjustable and turn it lefty loosey whilst applying some upward pressure on the screw head. If that doesn't work some magic then the next thing is to simply find a drill bit that is just below the thread width and using your already drilled hole, put in a bigger hole, then using a lefty right action keep drilling the hole and use the drill as a side mill which will chip away at the by now very thin walls until the whole screw comes away. You might need to use a slightly bigger threaded screw if the original hole has been chewed up, a tap for that size will put in a new threading and you should now have a screwable hole all ready to work :D
Corr this sounds like a decent way of getting them out :D will look into this Watson, cheers :)
Great job joey…that was a great fix
Well done mate, I always get excited when it works 😆
I managed to get a banger of a deal:
Working Xbox series S + controller
2TB external Hardrive
All for £145 and i sold the 2tb hardrive for £45 so a fully working Xbox series for £100 is just something else lol
Ah that's not bad at all! :)
Bro, I ❤ your excitement!!!! Great fix! Keep it up, you rock 🤘🤘🤘
Thankyou mate :)
another great repair to add to the portfolio. 😊
Nice job! The hype when u get something fixes is so amazing it even gets my hyped! Nice job repairing something and the quality of the video is extraordinary! Hope u fix alot more in the future!
Ah thankyou Kazuia! Is this the first video of mine you've seen? :)
Another job well done, loved it.
Thanks bud!
Great work brother!💯
Thanks :)
What a video - well done sir!
Thankyou :)
Would have been nice to see the dremmel use in more detail as it's an uncommon occurance. Great fix overall.
Thanks for the feedback Abdul :)
I'm never a fan of using a Dremel type tool for stripped screws, I don't like the idea of small metal filings everywhere. I prefer to drill them out, less damage and less mess.
I am a noob, but I learned a lot especially about trace repair from videos you did and Thecod3r. Keep making awesome videos it really helps. P.S recently repaired my first (old gen) consoles and sold them for over 400% profit recently due to videos like these
Niiice glad I could help a little bit! That's one of the aims of the channel :)
Amazing job again just love the videos
Thanks Dean :)
Great job! Also, highly recommend a set of screw extractor bits!
They sound awesome haha, I needed them for this!
This exactly, get a set in all different diameters and it will save you so much hassle. They are a god send and you won't damage anything close by.
Nice one joey good fix pal 😁👍
Thanks bud!
You should try out the northridgefix's ripped trace repair copper strips.
Yeah I was thinking about getting some of those in :)
I know this is an old video, but it looks like you skipped three of the missing ground pads (going opposite of the data pad traces). Not sure if it really matters for the HDMI-port as you did manage to get an image from the Xbox. But great job overall!
Awesome work!
Thankyou :)
That's Xbox series x console was dead expensive to buy that on ebay Joey then I thought you bought the cheap any playstation consoles or xbox consoles and completely well done for you JoeyTech
Yeah I was very nervous buying it but it paid off massively! :)
buy screw ectractor kit costs about 5-10 quid very useful, takes minutes
GRATZ DUDE
Thanks :)
Your work is already much better than coder. Sorry to him but I have my opinion. Keep up the good work. I like how you left a little bit of slack on the wires. Ensures your work won’t be the first thing to break. Masking everything is just another rookie mistake. Mask has it’s place and you really have to think how to use it.
You're completely entitled to your opinion Jesus and thank you for the compliment, but I'll never compare myself to other techs to be "better", but more so different than them 😊 Everyone has their own method of doing this and i'll always respect everyone.
Besides, most of the stuff I've fixed has been learned from Phil.
Stripped pins:( I’ve fixed one it was a pain lol
Shocked you got it working, looked like utter ass before. Hope those diodes aren't too important.
Same haha! This was a very big win for me :)
I'm confused on how so many hdmi ports are getting damaged, I have had lots of consoles and still have old ones. I have never had an hdmi port failure.
Same here actually. Never had a console with a faulty port that I’ve owned 😂
Great fix 👌🥳
Thanks :)
Joey does Trace Repairs!
Tries* haha. Could of deffo been a better job!
I think your paying too much for a fualty console ....i got a used working one for the same price you paid...but its nice seeing you saving those consoles 👌
Awesome job!!!!!!!
thankyou!
Great fix! Do you use solder lead free?
Thankyou! I use leaded solder :)
Gg bro nice job !
Thanks :)
Yes!
Nice fix!
LET'S GO JOEY !!!!!!!!!!!!!!!!!
YES STEVE!!!!!
Nice one
Hi what type of microscope do you use.. I truly love you content...
Hi there :) Thankyou. It should be in the description below :)
Getting better with the amount of Flux
Only. 75% of Rossmann unit of Flux
Hahahaha, I love every single of your flux comments :)
@@JoeyDoesTech I work for Big Flux industry
LOL
Waiting on another Xbox to arrive
@@JoeyDoesTech make an oddysee, and rumble channel, put videos on the other platforms
Are you selling this one or keeping it
Epic fix
Great reapir, I am in the middle of repairing a previous hdmi repair attempt and nootices that the resistor R178 is missing beside the hdmi retimer chip, is there you would know or anyone has an idea what is the value of the resistor R178? Thank you
I have no idea on the value of that resistor, sorry :( if you join the discord someone may be able to help :)
Whys the price in $$$
Dollars is the worlds most recognised currency :)
Beginners Luck :)
no wonder it broke. they were playing fifa
Haha been there way too many times!
Let's gooooooooooooo