2K Hologram of Samurai Paint 2KHLG
ฝัง
- เผยแพร่เมื่อ 17 ธ.ค. 2024
- Paint to use : 2KHLG on Black
Step 1: Spray Primer 2K04 apply 2 layers
each layer allow it dry 5 -15 minute
Step 2 : Spray black 30/109 as under coat
apply 2 layers and allow it 5 -15 minute
Step 3 : Spray 2KHLG as Top Coat
Step 4 : Spray Clear 2K01 apply 2 - 4
layers 5 - 10 minute each layers
Learn to Spray other colours below :
1/ Standard Colours : • PS124 Premium Silver o...
2/ Metallic Colours : • Learn to spray 1144 Su...
3/Honda : • How to Spray H168* HON...
4/Yamaha : • Samurai paint Y3973*
5/Kawasaki : • How to Spray K420** Pe...
6/Suzuki : • Samurai Paint S326* Pe...
7/Wheel Alloy : • Learn to Spray Floresc...
8/Engine Part : • Samurai paint Y367* Da...
9/High Temp : • Hi - temp of Samurai p...
10/Khameleon : • Learn to Spray Samurai...
11/Water Transfer Film : • Tip Water Transfer Fil...
12/ Fluorescent Colours : • Fluorescent of SAMURAI...
13/ HOLOGRAM : • Beauty Helmet by Holog...
14/ Candy Colours : • Tip to Spray Candy Yel...
15/Flat Colours : • How to Spray NINJA WHI...
16/Geigi : • CM05 paint Polish on H...
17/ Activator Crystal Effect : • How to do Crystal Effe...
17/Remover : • Sticker Remove STR600 ...
18/ Paint remove : • New PR500 Paint Remover
tak gosok hitam, pastu second layer msih ad kulit limau. last tibe jdi black diamond 😂 mcm mana tu 😅
After spraying the hologram thenUse Clear 2k sir?
This video use clear holograms on black
@@prospraykh ohh I see..so no need 2k clear 2k01 right??
@@blazzz8898 it is better result when you use 2K Holograms
@@prospraykh ohhh ok thanks 👌😀
ពី layer មួយទៅមួយចាំរយះពេលបុ៉ន្នានបង epoxy to black and layer 1 to layer 2?
ពី១layer ទៅ1 layer យើង រងចំាវាស្ងួត 10-15នាទី តែបើ យើងប្រើប្រភេទ 2Kដូចក្នុងvideo រងចំាស្ងួត 1-2ម៉ោង
ហើយប្រភេទ2K បងកុំភ្លេចអុកក្បាលវាផង បើមិនបានអុកទេ បាញ់អត់ស្ងួតទេ
@@prospraykh អរគុណច្រើនបង
need to use laqour after using the 2k hologram
No only 2KHLG