Great instruction video!! I purchased the same blinds and was about to pay over $100 dollars to get them installed. I am so glad I came across your video. Now I can install them myself. Thank you for sharing.
Thank you so much for this video! My husband and I just bought our first house and it diesnt have any blinds. We were able to install the first 3 today thanks to this video!
I just installed my parents blinds, they lost the instructions, but thanks to your video, I was able to install it with ease, thanks to your video. I give it a thumbs 👍 up!
Thank You ! I got the whole package on better understanding the hang of working with the installation of my two window blinds. Your illustrations on how to do this job couldn't have been any clearer. Cheers!
Thank you!! I moved out on my own the end of last year and have been trying to be fully independent (using TH-cam videos to learn how to do apartment things). This was super helpful, thank you!
Great video - thank you for sharing! I'm gearing up to put cordless blinds throughout the house - this looks simple enough for me to do it myself. Home Depot, here I come!
In the Walmart brand cordless blinds, there is a 1 inch safety tension pin (mine was grey in color) on top of the blind set. If you do not remove this pin, YOUR BLINDS WILL NOT GO UP AND DOWN. It’s in the instructions, but it’s easily possible to accidentally miss reading it while assembling this product. Stay blessed
Thank you sooooo much. I did all the hard work but didn’t know how to bring the “Easy as pie” blinds down. And you were the only one that showed me how. 😍
Thanks for the informative video! Ordered new blinds for the kitchen window as I accidentally broke it. I was stumped on the measurement as well. Couldn't figure out what size to get since my window is 58" x 35". I can't wait to install mine soon!
I just put mine up thanks to you! My only worry is I probably should have used screw anchors in what I think is dry wall. I hope this will hold. Mine are 52x64 (with 4 brackets). About 12 lbs. I did an inside mount and the valence is slightly too long. If I had put the brackets closer to the outer inside edge I probably could have avoided that. A little trim and it’ll be fine. Looks great over all! Thanks!
Kim dumaine If they really are going into drywall without a stud behind it I highly recommend you put some anchors in. Do it right the first time to avoid a disaster later.
Thanks! Great video! What would you do for a 6ft (72in) wide window? Two 36in wide blinds? We currently just have curtains up but could use blinds as well.
You can get custom cut blinds. Sometimes they sag in the middle though so try to find some with a third bracket for the middle. Two blinds may look funny from the exterior view.
Having a hard time installing my new blinds because my screws keep falling out. Tried putting the screw anchors in and they fall out as well. Looking at videos for help. I'm not pre drilling because I misplaced my drill bit for that. I'm not skilled in drilling or anything, and I don't know if I have the drill to high, if that's such a thing. I don't know!!!! Or is it just, bad window casings. I'm feeling lost and frustrated. What should be easy, is turning out a mess!!!! Please help if you can.
PERFECT PRESENTATION.THANK YOU SO MUCDH MY FRIEND.GOD BLESS.YOU JUST LIGHTENED MY LIFE WHEN I WAS STUCK ON HOW TO INSTALL EXACTLY THE SAME KIND OF BLIND.
I have a question that the video does not discuss. On the inside of the bracket it has an RH and a LH, which I am assuming means that you put the RH on the right had side, and so forth. I did this and when I went to the left side, the big holes in the bracket were on the top. It's the only way it will work on that side. What am I doing wrong?
Yup, I knew all that, my instructions don't tell me how to release the tension on the blind. It is locked in shipping position so they won't do my any good until I can figure that out.
Anyway you can show how to position the end brackets properly when the blinds are a little bit shorter than the window frame? I've been looking all over the internet and there's not a tutorial video on how to do this.
The blinds shown here don’t have end brackets for mounting. They have clips that go on the top instead. For end bracket blinds, you just measure the opening, subtract the blind width and divide that by 2. That tells you how far in to measure on each end for the bracket. I suggest putting them 1/4 farther towards the frame than the measurement to make sure there is enough room.
My box came in the mail and we hung them, without a problem. However, the 1-inch long "hoop" piece that your wand attaches to was already connected to the top of my wand! - WTH? I've been trying to screw it in to the top of the blind, attempted to push it in.....etc. Any ideas?
Can you add the link where you go these ? I kept clicking it but it’s saying sorry no page available. What’s the brand and name of the blinds ? Please help
Could you do a video simply explaining it as if you had windows made that way? You did the explaining of the alternate installation and stopped when it came time to actually install them...
It's my understanding that I need to attach the brackets for my inside blinds to the sides of the window frame rather than the top but the brackets that came with the blinds are top only. What can I do?
@@TightWadDIY I was told that the material at the top of the window was not as solid as the sides. I have since watched a number of videos where framing is constructed and it seems to me that no matter what the material is above the frame, the frame should hold the weight. Is that right?
@@cathyperry6729 I obviously can’t make any guarantees but there should be a frame made from 2x4s and then faced with a 3/4” board. I don’t see any reason you wouldn’t be able to hang the blinds from the top.
Wait a minute, Wait a minute HOLD UP I did exactly what you demostrate you pull down the blind so easy I can't get the blinds down. If I pull on it too hard it will come down WHAT DID I DO WRONG!
@@TightWadDIY I figure it out there was a ORANGE WARNING that says Remember to remove tension pin before installing I took the put out and it can down like BUTTER.
![Warhammer 40k: Space Marine 2 | เพื่อจักรพรรดิ ! [ตอนเดียวจบ]](http://i.ytimg.com/vi/4M0ckYMA4-U/mqdefault.jpg)
This is how tutorials like this should be done, no bs or fluff, straight to the point, accurate and lean. Superb!
Thank you!
Great instruction video!! I purchased the same blinds and was about to pay over $100 dollars to get them installed. I am so glad I came across your video. Now I can install them myself. Thank you for sharing.
Whew! That is expensive! They are really easy to install. You’ve got this!
I cannot tell you how much time you saved me. I suck at this stuff.....and your instruction made it so much easier for me. THANK YOU!!!!!!
That’s great) I’m glad it worked for you too!
Omg, thank you for the super clear step by step instructions, nice and slowly for those of us who are quite clueless!!
Glad it was helpful!
Thank you so much for this video! My husband and I just bought our first house and it diesnt have any blinds. We were able to install the first 3 today thanks to this video!
That’s great to hear! Congrats on the new home!
I just installed my parents blinds, they lost the instructions, but thanks to your video, I was able to install it with ease, thanks to your video. I give it a thumbs 👍 up!
That’s great! I’m always happy to help!
@TightWadDIY thank you so much, great video. 👍
Thank You ! I got the whole package on better understanding the hang of working with the installation of my two window blinds. Your illustrations on how to do this job couldn't have been any clearer. Cheers!
My pleasure! I’m glad you found it helpful!
Thanks, I generally don’t have to hang blinds but hubby passed so I am doing it for him.
I’m very sorry for your loss. I hope you are able to get it done.
You’re a genius. I had no idea how to hang my new blinds and was going to hire someone . Thank you for showing me how to install myself.
You’re welcome! Be sure to follow along!
Thank you!! I moved out on my own the end of last year and have been trying to be fully independent (using TH-cam videos to learn how to do apartment things). This was super helpful, thank you!
That’s great! I’m happy to help.
Great video - thank you for sharing! I'm gearing up to put cordless blinds throughout the house - this looks simple enough for me to do it myself. Home Depot, here I come!
You can do it! It was really easy! I was surprised how easy it was!
Thank you kind sir!!!! I just replaced two sets of blinds today and fell pretty good about myself lol on to the other home projects. Thanks again.
Excellent!
A video on shortening this type of blind - I just purchased several of these from Home Depot - would be really useful. Thanks so much for the video!
Yes great video but a follow up on how to shorten this specific model of blind would be very helpful.
Thank you for these instructions!! They were straight to the point and easy to follow. Life safer .
It’s my pleasure. I’m glad you found them helpful.
the husband here,,thank you got some 4 foot blinds fixing to hangem high..got yhr know how now. thanks
That’s great! Now be the hero!
In the Walmart brand cordless blinds, there is a 1 inch safety tension pin (mine was grey in color) on top of the blind set. If you do not remove this pin, YOUR BLINDS WILL NOT GO UP AND DOWN. It’s in the instructions, but it’s easily possible to accidentally miss reading it while assembling this product. Stay blessed
Thank you for adding valuable info!
Thank you it saved us a lot of time, we have 7 to put up. It was very helpful.
Glad it helped!
Thank you so much!! My first time installing a cordless blind and your instructions made it much easier!!
That’s great! I’m glad you were able to get them installed.
Did a great job explaining!
Thank you!
I got my window blinds and put them up. There was a couple and snafu's but looking at this video a second time helped. Thanks
It took my husband a time to get it done but the instructions was great thanks.
I’m glad it’s done now!
Thanks for this video-was lost with box with no instructions 😊
My pleasure!
Thank you sooooo much. I did all the hard work but didn’t know how to bring the “Easy as pie” blinds down.
And you were the only one that showed me how. 😍
Great! I’m glad it worked for you!
Thanks for the informative video! Ordered new blinds for the kitchen window as I accidentally broke it. I was stumped on the measurement as well. Couldn't figure out what size to get since my window is 58" x 35". I can't wait to install mine soon!
I’m always happy to help!
Thanks for the detailed instructions. It help me a lot
My pleasure. Be sure to subscribe. I have over 200 videos with easy to follow steps.
Here 2024 great instructional video👍🏿
Glad it was helpful!
That video tremendously help me
I’m so glad to hear that it helped you out. Please consider subscribing.
Thanx to this viedo I was able to put my blinds up...thank you
That’s great! I’m glad it helped.
Thank you so much for the help. We couldn’t figure it out until we saw your video!
Great! I’m glad you found it helpful!
Yes bro I just hit $100 lick off this video live at the job site thank you sir and keep up the good work
That’s great! I’ll take 10%! 😂😂
over all great instructions just on change the front trim goes on after you snap the blinds to the mounting brackets
Thanks!
Got it done and love them. Thank you very much.
Great! I love these blinds too!
Yo I just moved and one of them fell and I got kinda scared but then I watched your video and it helped a lot . Thanks
AMM Vlogs I’m glad you have the confidence to fix it yourself!
Thanks helped me out a lot
I’m glad you were able to get them installed!
Excellent instructions, thank you and God bless!
My pleasure.
Very very good!!!!!!!
I’m glad you found it helpful.
I just put mine up thanks to you! My only worry is I probably should have used screw anchors in what I think is dry wall. I hope this will hold. Mine are 52x64 (with 4 brackets). About 12 lbs. I did an inside mount and the valence is slightly too long. If I had put the brackets closer to the outer inside edge I probably could have avoided that. A little trim and it’ll be fine. Looks great over all! Thanks!
Kim dumaine If they really are going into drywall without a stud behind it I highly recommend you put some anchors in. Do it right the first time to avoid a disaster later.
Thanks Bro, you were a big help, have a blessed day
My pleasure!
Thank you
My pleasure!
This was very helpful. Thank you!
Glad it was helpful!
Great video, thanks a lot!
Glad you liked it!
Great job
Thanks!
Thank you for helping me figure this out
You are welcome! I’m glad you got them put up!
Your explanation is very good 👍. I did it.
That’s great!
Great video thanks
Glad you enjoyed it.
What about a video of adjusting the length and taking out slats?!
you made it look easy thank you for the video...
You’re welcome. These clips are waaaayyyy easier!
Thank you sir.
My pleasure!
Thanks man
You're welcome!
Thank you. Explained in detail every step as well as what every piece of hard ware is and it's purpose. Turned out well for me.
I’m always happy to help! I’m glad your install went well. Be sure to subscribe!
This content was helpful. Thank you.
My pleasure!
Thank you!! 🙏
You're so welcome!
This was very helpful.
Glad it was helpful!
Great instruction video .Thank you
Thank you! It’s my pleasure.
Great job! Thank you for sharing!
My pleasure!
Straight to the point. Thanks
You are welcome. I’m glad you liked the format. Please consider subscribing.
Didn’t know about the double tape until you ! Thx
You are welcome. It makes it so much easier!
thank you!!!!
You're welcome!
Thank you helped out a lot
Thanks
Welcome
Thank you! Very helpful.
My pleasure. I’m glad you found it helpful.
incredibly helpful and informative!
Great! I’m glad you enjoyed it!
Thank for your details it help me a lot. Happy Holidays.
You are welcome. I’m glad you found it helpful.
Excellent video, helped me a lot thanks buddy!
Great! I hope yours went up effortlessly!
Thanks for sharing!
You are welcome.
Nice 👍
Thank you! Cheers!
Great instruction. Thank you
Thank you. I try to stay on topic and provide accurate instructions. I’m a school teacher.
Thank you! I’m actually a school teacher! I do my best to stay on topic and provide clear instructions.
That helped really... Thanks
You are welcome. I love this new bracket design. It makes things so easy!
Thank you very much! Easy to follow
Rosie Treasure I’m glad you found it helpful. These new style blinds are super easy.
Super helpful thank you so much❤️❤️
You are welcome. I’m glad you found it helpful.
Great video! Thanks
Thanks, I appreciate it!
Thanks! Great video! What would you do for a 6ft (72in) wide window? Two 36in wide blinds? We currently just have curtains up but could use blinds as well.
You can get custom cut blinds. Sometimes they sag in the middle though so try to find some with a third bracket for the middle. Two blinds may look funny from the exterior view.
Having a hard time installing my new blinds because my screws keep falling out. Tried putting the screw anchors in and they fall out as well. Looking at videos for help. I'm not pre drilling because I misplaced my drill bit for that. I'm not skilled in drilling or anything, and I don't know if I have the drill to high, if that's such a thing. I don't know!!!! Or is it just, bad window casings. I'm feeling lost and frustrated. What should be easy, is turning out a mess!!!! Please help if you can.
PERFECT PRESENTATION.THANK YOU SO MUCDH MY FRIEND.GOD BLESS.YOU JUST LIGHTENED MY LIFE WHEN I WAS STUCK ON HOW TO INSTALL EXACTLY THE SAME KIND OF BLIND.
I’m glad you found it helpful! It sounds like you should subscribe! I have over 200 similar style videos.
Do I NEED to put in the long screws as well? Would I be just fine just drilling in the short screws (in the back)?
You won’t know until it falls! Haha.
Thanks for the video. So the mounting brackets could be installed either to the side or to the top of the window, right?
Depends on the model you purchased. Most have the option of side or top mount though.
Thank you. That helps.
I’m glad to hear you found it helpful. He sure to subscribe!
I have a question that the video does not discuss. On the inside of the bracket it has an RH and a LH, which I am assuming means that you put the RH on the right had side, and so forth. I did this and when I went to the left side, the big holes in the bracket were on the top. It's the only way it will work on that side. What am I doing wrong?
I was wondering how to remove these blinds so I can spray them with the hose rather than going slat by slat. Thanks
The top part would just unclip. It will take a little force but shouldn’t be hard.
Yup, I knew all that, my instructions don't tell me how to release the tension on the blind. It is locked in shipping position so they won't do my any good until I can figure that out.
Dang. I’m really not sure what would cause that.
Anyway you can show how to position the end brackets properly when the blinds are a little bit shorter than the window frame? I've been looking all over the internet and there's not a tutorial video on how to do this.
The blinds shown here don’t have end brackets for mounting. They have clips that go on the top instead. For end bracket blinds, you just measure the opening, subtract the blind width and divide that by 2. That tells you how far in to measure on each end for the bracket. I suggest putting them 1/4 farther towards the frame than the measurement to make sure there is enough room.
Very helpful thankyou!
Bobby Miller You are welcome. These newer style blinds are so easy to install!
Thank you.
You are welcome! Hope your install goes well.
My box came in the mail and we hung them, without a problem. However, the 1-inch long "hoop" piece that your wand attaches to was already connected to the top of my wand! - WTH?
I've been trying to screw it in to the top of the blind, attempted to push it in.....etc.
Any ideas?
Sorry I really don’t remember that part! Does it not just snap in?
How do you release the blinds to stretch down in length?
You just pull down on the bottom piece. Push them up to make them fold back up. I don’t even know how it works! 😂😂
Can these blinds be installed to an inside door without a in set?
They should.
I want to do the inside mount, however the inside depth of the frame is only 1 1/2 inches. Would this work ?
Can you add the link where you go these ? I kept clicking it but it’s saying sorry no page available. What’s the brand and name of the blinds ? Please help
I bought them at Home Depot. I’ll try to find the brand name for you.
@@TightWadDIY you are the best thank you
Great detailed video but I really need to know how to install these on the outside of the window :/
Sorry. I don’t have any windows made that way for a demo.
Could you do a video simply explaining it as if you had windows made that way? You did the explaining of the alternate installation and stopped when it came time to actually install them...
I have those blinds. I can let them up, but they won’t pull down. Am I doing something incorrectly?
You can’t reach up and pull them down?
If I wanted to do the side brackets instead that you just slide the blinds in, how big are those brackets I need to get?
I’m sorry I don’t know where you would order those from.
Is there a model number on the box? Thanks for this video!
Sorry. I don’t have the boxes anymore.
What do you called that bracket and where to buy that type of bracket?
They came with the blinds. I’m not sure where else to buy them.
It's my understanding that I need to attach the brackets for my inside blinds to the sides of the window frame rather than the top but the brackets that came with the blinds are top only. What can I do?
Why would you need to attach them to the sides of the window?
@@TightWadDIY I was told that the material at the top of the window was not as solid as the sides. I have since watched a number of videos where framing is constructed and it seems to me that no matter what the material is above the frame, the frame should hold the weight. Is that right?
@@cathyperry6729 I obviously can’t make any guarantees but there should be a frame made from 2x4s and then faced with a 3/4” board. I don’t see any reason you wouldn’t be able to hang the blinds from the top.
My blinds are brand new and the installation went well but when I went to pull down they didn't move?
Hmmmm….I’m not sure what would prevent that.
What about the inside base mounts?
Those are different blinds.
What about the tension pin?
What do you mean?
My blinds will not go up and down can you tell me what to do thank you
Sorry that would be very hard to diagnose without being there.
My blinds will not go up or down can you tell me what to do 😅
Sorry I don’t know how to help you without seeing them.
Wait a minute, Wait a minute HOLD UP I did exactly what you demostrate you pull down the blind so easy I can't get the blinds down. If I pull on it too hard it will come down WHAT DID I DO WRONG!
I’m not really sure. Mine aren’t hard to pull at all. Did you buy yours from HD or somewhere else?
@@TightWadDIY I bought them from Walmart 2 of them 1is up to the kitchen window but it just come down I'm pulling on it and it will not come down.
@@TightWadDIY I figure it out there was a ORANGE WARNING that says Remember to remove tension pin before installing I took the put out and it can down like BUTTER.
@@Chinaglo24 That’s great! I’m glad you figured it out!
@@Chinaglo24 I have the same problem.. where is this orange tab at?