Hay brother thank you for making this video for us to learn from great job! I wanted to share a thought that I had on the wiring for the lights. I bought a set of the running lights for my 24 accord and it just got me thinking if you hook the red wire to the daytime running lights circuit that should give you the startup animation and the running lights should be on bright for daylight driving. Then hook the white wire to the headlights circuit so the running lights will dim down for night time driving. Then of course the yellow goes to the signal lights circuit. Then just hook the black to a reliable ground. Like I say just a thought for my set that I’m going to install on my accord here soon. Hope this helps someone and thank you again for helping me by making these videos!
Connect the red wire to the low beam headlight so the light will dim at night and not too bright. If you have the animation on red try the white wire connecting to the low beam headlight wire.
@@JRod.Cuztom I’m not sure as I own a 10th gen but if you get a circuit tester and have someone turn on and off the headlight while you test you should be able to quickly find it
@@JRod.CuztomYou can use multimeter to check the voltage when headlight is on. Unplug the connector and push start for accessories, then you can test the connector wires which one is the wire.
I did it exactly like you did in the video and the lights work fine. But now all the security alerts on the dashboard have come on and I don't know how to turn them off. Can you tell me how to turn them off and back to normal ?
Hey bro do these lights make a difference. My Honda accord 2023 headlights are led but not good at all. Not bright. Not sure y Honda decided to delete fog lights. I want them but if it’s not brighter at night then what’s the point?
@JRod.Cuztom after installing the fog lights into the fuse panel undet the hood. I'm thinking that caused the system messages to come on in the dashboard. They are flashing see your dealer.
swaautosports.com/collections/2023-11th-gen-honda-accord-parts/products/swa-2023-2024-11th-gen-honda-accord-led-front-bumper-fog-daytime-running-lamp-flash-led-turn-signal-feature
Black Friday promo code NOIRFRIDAY23
are you still running them and if so how have they hold up so far@@JRod.Cuztom
One of them got water inside .
This fixes my issue with the look of the car. Great job.
Hay brother thank you for making this video for us to learn from great job! I wanted to share a thought that I had on the wiring for the lights. I bought a set of the running lights for my 24 accord and it just got me thinking if you hook the red wire to the daytime running lights circuit that should give you the startup animation and the running lights should be on bright for daylight driving. Then hook the white wire to the headlights circuit so the running lights will dim down for night time driving. Then of course the yellow goes to the signal lights circuit. Then just hook the black to a reliable ground. Like I say just a thought for my set that I’m going to install on my accord here soon. Hope this helps someone and thank you again for helping me by making these videos!
Make a lot of sense brother if you can let me know what are the wire colors I try it
Helpful but need to know where the daytime running light circuit is lol. I hate wiring 😡
@@jacksongraham08yeah me too
@@JRod.Cuztomwhere does the daytime running circuit connection is on the headlight connector
is it car wash safe?
I appreciate what you do 🙏
Thank you brother I appreciate that 🙏
Connect the red wire to the low beam headlight so the light will dim at night and not too bright. If you have the animation on red try the white wire connecting to the low beam headlight wire.
was about to say the same thing
Thanks I’ll try it just have to find the wire colors do you know?
@@JRod.Cuztom I’m not sure as I own a 10th gen but if you get a circuit tester and have someone turn on and off the headlight while you test you should be able to quickly find it
@stevepierre3500 thanks bro I’m going to try to find it appreciate it
@@JRod.CuztomYou can use multimeter to check the voltage when headlight is on. Unplug the connector and push start for accessories, then you can test the connector wires which one is the wire.
I did it exactly like you did in the video and the lights work fine. But now all the security alerts on the dashboard have come on and I don't know how to turn them off. Can you tell me how to turn them off and back to normal ?
You probably forgot to connect the harness connect That connect to the bumper
The connect that goes to the sensor and the front grill shutters
Nice work ! Did you paint those plastic pieces that are next to the headlights? Usually they are like factory matte black or flat black trim
No it’s an over lay plastic cover gloss black
Any plans on putting a aftermarket exhaust?
Conecte las mías. Pero no se apagan xk
That is a great looking Accord! 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Whether you keep it or not, could you do a video on switching the DRL to stay amber?
How do you do that that .turn signal is amber
Hi, can I ask where you got your caliper covers? I have a 2024 hybrid and haven't found any options
www.oakmandesignscars.com/collections/caliper-cover/products/2018-2021-honda-accord-black-painted-caliper-covers
Hey bro do these lights make a difference. My Honda accord 2023 headlights are led but not good at all. Not bright. Not sure y Honda decided to delete fog lights. I want them but if it’s not brighter at night then what’s the point?
Just for looks it’s a running light not fog light
Did you say to plug both of the plugs together? They wont reach each other. Or are ypu cutting the connectors off of them?
I put them together
Nice thanks for the response. Did you figure out what wire powers the lowbeam? I can find it with my multimeter
How to reset the warning lights after installing the fog lights there are not turning off and heated seat not working
Why are your warning light on
@JRod.Cuztom after installing the fog lights into the fuse panel undet the hood. I'm thinking that caused the system messages to come on in the dashboard. They are flashing see your dealer.
@lorenzomack3382 yea I know I said that on my video I didn’t connect to fuse because of that reason.. I connected both wire back of headlight ..
@JRod.Cuztom so the warning wouldn't have came on cause I removed the plug when I removed took the bumper off ?
did you have to remove the entire bumper to install the lights?
Watch the video
Are u going to do some work exhaust?
Not at the moment. I don’t like the noise
How much do you want for those stock vents?
What you offer
I followed along with the video and my lights don’t come on. Any help?
Ground or the pins are not all the way in make contact
What i do if i want the animation I only connect the withe one ?
Red one
Where u get the grill from
swaautosports.com/collections/2023-11th-gen-honda-accord-parts/products/swa-2023-2024-11th-gen-honda-accord-abs-gloss-black-front-bumper-center-hood-grille-cover
I bought mine from china.so mine doesn’t work😢
Cleanest 11th gen accord no question
Thank you for the support
What cause my yellow lights to stay on
Probably connect on wrong spot yellow is the turn signal
@JRod.Cuztom what causestststsd my warning lights in my dashboard to all come on after installation of the lights in the bumper.
I'm really surprised that you not installing parking sensors. I might beat you to that video. I found a good one just like OEM for about $150 usd.
Not interested in them
@@JRod.Cuztom I got you. For me it’s parking sensors and the BSI system but I want them OEM
I think you should name your car Honda “Chaparro” magnificent car
🤔
My Lights won’t go off
You probably don’t have auxiliary power
@@JRod.Cuztomwhere do I find the aux power
The only place I know is underneath the steering wheel inside the car
@@JRod.Cuztomok I’ll try that I forgot to mention that I have a sport hybrid would that be the same
@@JRod.Cuztom can someone tell me what color is the daytime running lights is that is connected to the headlights
💪💪
🫡
@JRod.Cuztom Mine is a 2024 Accord Hybrid