You can charge almost all lithium cellis. Yes lithium ion will work Always consult your manual for your batteries before charging Make sure your settings are correct to be safe :)
The manual that came with the charger didn't explain very much. Maybe to someone who uses lipo batteries regularly the program/set up to this charger might be straight forward but for me - not so much. Thankyou for this video. My batteries are now charging.
Stupid question, im guessing when it's fully charged, does ut stop charging or it continues charging but charger turn off eventually? As a safty measure?
Hi, i have a 11.1 v 4500 mah 3S 35C LiPo battery. So can i use this charger to charge it? Is there a setting for such batteries in this charger? Any help would mean a lot. Thank you in advance. Cheers!😊
I’m surprised you don’t use the venom duel pro.4 batteries at a time not too bad with all the batteries you need for a fun day with the toys. I know the price is a bit steep but you get four chargers in one really.
Yeah good charger It’s overkill for about 90% of the folks out there. We found that most hobbyists like a nice easy single charger Dual chargers have been hot lately with all the new 6s trucks We have used /sold venom chargers in the past and have had failures... it’s weird because Venom is a top dog in our eyes. Thanks for the comment Chris
Good afternoon. Please advise what is the most optimal (speed is not important, the main thing is the reliability and durability of the battery) parameters S65 for charging LiPo TopTuning 6500mAh, 4S, 14.8V, 80C, 2C, 96.2 Wh? Thank you.
This charger can charge 4s but your asking to much from it 4s fully charged is 16.8v (4.2v per cell) 16.8 x 6.5 (6500mah) = 109.2 Your battery requires 109.2 watts to efficiently charge your battery at a rate of 1c This charger is fine for say a typical 3s 5000mah but your asking a bit much from it It will charge it but it will take a long time plus you’ll be working it to death, ideally you need double of this charge being only 65watts Great little charger tho, far superior to the b6 ac model
Great question You can change the lithium bolts per cell in the settings to 3.8v per cell (lithium high voltage) and that will do the job Chris Ps the setting is harder to find in the charger but it’s there
@@ChrisHouseHobby thanks! I will try it. Currently i'm chatging my 7.6v battery with 7.4v only and looks like no problem.. or maybe there's going to be a problem and i just not seeing it yet
Charging first time. I have a 2s 7.4v battery with 5200mah. Im using the balance cable which has three wires, one goes to each - and + terminals, but there's a third that i guess goes into the battery middle hole?? Please help. Also I've followed the video and after 7mins, it says 8.2v, im worried this number is higher than the 7.4v after only 7 mins
Can you charge soldered li ion batteries with this one ?
You can charge almost all lithium cellis. Yes lithium ion will work
Always consult your manual for your batteries before charging
Make sure your settings are correct to be safe :)
How do you know if the battery if fully charged?
The manual that came with the charger didn't explain very much. Maybe to someone who uses lipo batteries regularly the program/set up to this charger might be straight forward but for me - not so much. Thankyou for this video. My batteries are now charging.
While charging you can check each cell by pressing the plus button
A tip : you can watch movies at flixzone. I've been using them for watching loads of movies these days.
@Gustavo Keegan definitely, I've been watching on Flixzone for months myself =)
Is there a warning if its full charge?
Just got mine today and your vid helped a lot, thank you.
Sky should hire you. Their manual that came with the t100 is half useless! Thanks for this!
were talking about terminators now?
@@Blama_ 🤣🤣🤣 Not quite that bad a result! LOL!
whats the difference between nimh charge and nimh auto charge?
Stupid question, im guessing when it's fully charged, does ut stop charging or it continues charging but charger turn off eventually? As a safty measure?
Great question. It does have an auto shutoff when the battery is full. We ALWAYS recommend being home while charging. Thanks for the question
can you discharge dji drone batteries with this ? Thanks
any lipo
Do you need a balance board to go with this?
I just got one of these. While charging an NiMH what is tye number counting up on the bottom right of the display?
Hello buddy do I need the xt60 to dinhs to charge my battery or should it charge with the left plugs I'm really new too this
Hi, i have a 11.1 v 4500 mah 3S 35C LiPo battery. So can i use this charger to charge it? Is there a setting for such batteries in this charger?
Any help would mean a lot. Thank you in advance.
Cheers!😊
does it beep sound after done on storage mode?
It sure does :). Enjoy
@@ChrisHouseHobby i dont know why mine wont
@@jensenn92 maybe the buzzer is off, turn it on in settings
Nice review. Can I charge a 12.6v Li Ion battery pack or a 12.8v LiFePo4 batterypack, the ones that has BMS init, just by plugging in the xt60 output?
I’m surprised you don’t use the venom duel pro.4 batteries at a time not too bad with all the batteries you need for a fun day with the toys. I know the price is a bit steep but you get four chargers in one really.
Yeah good charger
It’s overkill for about 90% of the folks out there. We found that most hobbyists like a nice easy single charger
Dual chargers have been hot lately with all the new 6s trucks
We have used /sold venom chargers in the past and have had failures... it’s weird because Venom is a top dog in our eyes. Thanks for the comment
Chris
Good afternoon. Please advise what is the most optimal (speed is not important, the main thing is the reliability and durability of the battery) parameters S65 for charging LiPo TopTuning 6500mAh, 4S, 14.8V, 80C, 2C, 96.2 Wh?
Thank you.
This charger can charge 4s but your asking to much from it
4s fully charged is 16.8v (4.2v per cell)
16.8 x 6.5 (6500mah) = 109.2
Your battery requires 109.2 watts to efficiently charge your battery at a rate of 1c
This charger is fine for say a typical 3s 5000mah but your asking a bit much from it
It will charge it but it will take a long time plus you’ll be working it to death, ideally you need double of this charge being only 65watts
Great little charger tho, far superior to the b6 ac model
Really helpful, THANKS!
I saw that there's is no option for 7.6v for a 2s only 7.4. Can i still use that
Great question
You can change the lithium bolts per cell in the settings to 3.8v per cell (lithium high voltage) and that will do the job
Chris
Ps the setting is harder to find in the charger but it’s there
@@ChrisHouseHobby thanks! I will try it. Currently i'm chatging my 7.6v battery with 7.4v only and looks like no problem.. or maybe there's going to be a problem and i just not seeing it yet
Hello sir, I have been using this charger to charge my 2S Lipo. Is there any way to charge a 1S Lipo?
no sir 2-4s on that charger safely thanks for the question :] !
@@ChrisHouseHobby Thank you for your super speedy reply. Have a good one!
Thanks Chris, definitely helpful.
good video i got this charger and 3s lipos 5000mah gonna test this charger tommorow
Charging first time. I have a 2s 7.4v battery with 5200mah. Im using the balance cable which has three wires, one goes to each - and + terminals, but there's a third that i guess goes into the battery middle hole?? Please help. Also I've followed the video and after 7mins, it says 8.2v, im worried this number is higher than the 7.4v after only 7 mins
Did you ever figure this out I'm new to rc and mine got to 8.3v before I shut it down
Is is an xt90 or xt60
Xt60 is the charger output connector
@@ChrisHouseHobby thank you soo much
thanks man
Nice to get a thanks here and there. Have a great week :)
Does this charger have power supply built in?
Yes it does. Plug it into the wall and you are good to go :)
@@ChrisHouseHobby Thanks
Awesome!
Keep pushing enter and will show % in battery