➡ Check Out DIY RESTORE AND PROTECT : bit.ly/4dOePQ7 ✅ Products Used In This Video ☞ bit.ly/3WyJ7R6 ✅ ======================================================= 🧽 SAVE 10% on DIY DETAIL Products 🇺🇸 bit.ly/3WyJ7R6 Use Code ''DOGMA'' to save $$ ======================================================= 🔥 Save 5% on CARZILLA Use Code: "DOGMA" ☞ carzilla.ca/?ref=dogma 🇺🇸 USA 🇨🇦 Canada FREE Shipping [High End Detailing Products] =======================================================
Im glad you tested this Dogma! This DIY restore came out the week after I restored the trim on my wifes Wrangler. I used Turtle Wax's graphine trim restorer, and it worked well, but was much thicker, required 2 coats and I had to use alot. But looks great. I dont think the Turtle wax restorer will last as long as the DIY restore. So when the Jeep needs a touch up, Ill definitely be using DIYs trim restore. I love DIY Details products. Fresh trim makes a huge visual impact! Thanks for the video.
Hey man thanks for tuning in! Yes the DIY line is probably more robust for sure, it's fairly new product, I want to test it long term but so far the results speak for them selves. I 100% agree with you the deep dark rich black trim makes or break the detail. Appreciate you cheers!
Great video. I’m looking forward to using this trim restore/protect. I have some fords with lots of the faded black plastics. I’ve always used solution finish but I find it doesn’t last long. Lucky guy to have been sent that product.
Hey Steve glad you liked it! Never tried solution finish but most trim coating I have used before were OK but most time you'd have ghosting from the faded look. I think the key is to polish them even if that'll add some gloss.
Hey David, thanks for tuning in as usual. I'd start with something soft or a finishing combo that you already have and go from there. For me that'd be Lake Country orange HDO with KCX F6 or Sonax PF. When pillars are at their worst I could even go as far as a MF pad and finish down after. Hope that helps cheers my friend!
@@davidboyce6427 I usually start with KC M3-02 micro polish with the KC 3" purple pad. It works great on the piano black anywhere. If it still needs more correction, I've done a drop of M3 and drop of F6 on same purple pad. Gets the great glossing of the M3 and a little more cut of the F6.
I like that this has protection also, unlike Solution Finish that you have to protect after applying or fades. Did Yvan mention how long it will last after opening given that you use so little on each car? Would be nice if they sold it in a 10oz bottle too, for like $16.95.
Yes Joel it's more expensive than solution finish but it's a 2in1 meaning you have ceramic protection in it. We'll have to test to it further but I think it'd outlast the competitor. Thanks for watching as usual man!
Great video my friend 👍 👍, the trim looks awesome, I’m slowly buying diy detail products because they look like amazing products, keep up the great content. Have a great day! 🤜🤛
Very cool Frank my friend! Just a new idea for you or something to reconsider, maybe a refresh video on the venerable Flex PXE 80? It seems that you like the machine, and I just bought it :) My first cordless 3', haven't had a chance to work with it as it came yesterday, seems like it has good power, and has a very solid build on it. Also a very cool charger! The car came out great man! I really liked the finish effect.
Hey Vic you've been gearing up lately!! Christmas is early in Poland i'm seeing 🤪 I can probably cook something for the flex pxe80 its definitely a beast I love it, i wouldnt change it for the rupes or anything. Thank you for the idea we're gonna start diving into the polishing stuff soon im waiting on a rotary and horses for the hoods. cheers brother ✌️
@@Detailing_Dogma Damn Frank this little nano has TORQUE! I love it... Think about making a vid on it, I'm sure that many love it like us! Also a rotary? That's uber cool, i wan't one too (tottaly a noob with them, need to learn!) Can't wait for your next vid! Cheers!
@@victoryensured7137 Hey Vic, im waiting for the Sema show before making a decision on the rotary, I'm firmly believe in cordless especially useful when video making, tripods and wires dont make a good mix. Flex is bringing a new revamped Set of cordless polishers with 24V and I'm really looking for a Cordless rupes rotary. talk soon
@@Detailing_Dogma thank you, what’s the best pre soak product for a very dirty car before rinseless wash in your opinion? Would KC GS or something else? I will be using 2 Marolex hand pumps. 1 with the solution and 1 with water to rinse. TIA
➡ Check Out DIY RESTORE AND PROTECT : bit.ly/4dOePQ7
✅ Products Used In This Video ☞ bit.ly/3WyJ7R6 ✅
=======================================================
🧽 SAVE 10% on DIY DETAIL Products 🇺🇸 bit.ly/3WyJ7R6
Use Code ''DOGMA'' to save $$
=======================================================
🔥 Save 5% on CARZILLA Use Code: "DOGMA" ☞ carzilla.ca/?ref=dogma
🇺🇸 USA 🇨🇦 Canada FREE Shipping [High End Detailing Products]
=======================================================
Happy you enjoyed it.
Thank you!
Im glad you tested this Dogma! This DIY restore came out the week after I restored the trim on my wifes Wrangler. I used Turtle Wax's graphine trim restorer, and it worked well, but was much thicker, required 2 coats and I had to use alot. But looks great. I dont think the Turtle wax restorer will last as long as the DIY restore. So when the Jeep needs a touch up, Ill definitely be using DIYs trim restore. I love DIY Details products.
Fresh trim makes a huge visual impact! Thanks for the video.
Hey man thanks for tuning in! Yes the DIY line is probably more robust for sure, it's fairly new product, I want to test it long term but so far the results speak for them selves. I 100% agree with you the deep dark rich black trim makes or break the detail. Appreciate you cheers!
Looks good! Might have to grab a bottle
Hey man thanks for watching! Appreciate you.
The car and trim looks really nice my friend 😁👍
Thank you Dave, appreciate you and thanks for taking the time to leave a comment!
Good job Frank
Thank you Sylvie, appreciate you!
looks as good as new! I will snag this for my wifes 2018 honda hrv eventually! definitely could use it
Go for it, it's fantastic stuff, thanks for watching!
I think we live on the same neighborhood ! Good to know im not the only one around here !!!
Hey man, you can always send me an email if you wanna talk more, cheers!
Great video. I’m looking forward to using this trim restore/protect.
I have some fords with lots of the faded black plastics.
I’ve always used solution finish but I find it doesn’t last long.
Lucky guy to have been sent that product.
Hey Steve glad you liked it! Never tried solution finish but most trim coating I have used before were OK but most time you'd have ghosting from the faded look. I think the key is to polish them even if that'll add some gloss.
Looks like a good product. Any idea how long it will last in real conditions. 🇨🇦👍👍
A year or more
Hey Eric thanks for watching as usual! I'll be playing more with it soon with cars I can keep around for updates, cheers, see you next week.
On my Honda I’ve got the Black Piano window trim B and C Pillars that are showing signs of dullness. What Polish would you recommend?
Hey David, thanks for tuning in as usual. I'd start with something soft or a finishing combo that you already have and go from there. For me that'd be Lake Country orange HDO with KCX F6 or Sonax PF. When pillars are at their worst I could even go as far as a MF pad and finish down after. Hope that helps cheers my friend!
@@Detailing_Dogma excellent I’ve got KCX F6
@@davidboyce6427 I usually start with KC M3-02 micro polish with the KC 3" purple pad. It works great on the piano black anywhere. If it still needs more correction, I've done a drop of M3 and drop of F6 on same purple pad. Gets the great glossing of the M3 and a little more cut of the F6.
I like that this has protection also, unlike Solution Finish that you have to protect after applying or fades. Did Yvan mention how long it will last after opening given that you use so little on each car? Would be nice if they sold it in a 10oz bottle too, for like $16.95.
Yes Joel it's more expensive than solution finish but it's a 2in1 meaning you have ceramic protection in it. We'll have to test to it further but I think it'd outlast the competitor. Thanks for watching as usual man!
Great video my friend 👍 👍, the trim looks awesome, I’m slowly buying diy detail products because they look like amazing products, keep up the great content. Have a great day! 🤜🤛
Hey Mario glad you're here again this week! The DIY product line is rated really high in my book for sure. Appreciate your usual support, talk soon!
Very cool Frank my friend! Just a new idea for you or something to reconsider, maybe a refresh video on the venerable Flex PXE 80? It seems that you like the machine, and I just bought it :) My first cordless 3', haven't had a chance to work with it as it came yesterday, seems like it has good power, and has a very solid build on it. Also a very cool charger! The car came out great man! I really liked the finish effect.
Hey Vic you've been gearing up lately!! Christmas is early in Poland i'm seeing 🤪 I can probably cook something for the flex pxe80 its definitely a beast I love it, i wouldnt change it for the rupes or anything. Thank you for the idea we're gonna start diving into the polishing stuff soon im waiting on a rotary and horses for the hoods. cheers brother ✌️
@@Detailing_Dogma Damn Frank this little nano has TORQUE! I love it... Think about making a vid on it, I'm sure that many love it like us! Also a rotary? That's uber cool, i wan't one too (tottaly a noob with them, need to learn!) Can't wait for your next vid! Cheers!
@@victoryensured7137 Hey Vic, im waiting for the Sema show before making a decision on the rotary, I'm firmly believe in cordless especially useful when video making, tripods and wires dont make a good mix. Flex is bringing a new revamped Set of cordless polishers with 24V and I'm really looking for a Cordless rupes rotary. talk soon
Merci François ✌🏻👍🏻. Would be great if you can make a rinseless wash video when you have a chance for newbies like myself 😂👍🏻
There's tons of rinseless wash videos available
Hey Yzer, you check out my VLOG of rinseless video if havent, but we'll have more rinseless soon for sure. Cheers brother
@@Detailing_Dogma thank you, what’s the best pre soak product for a very dirty car before rinseless wash in your opinion? Would KC GS or something else? I will be using 2 Marolex hand pumps. 1 with the solution and 1 with water to rinse. TIA
@@YZERPLAN I have 3 videos on pre-wash, I recommend you watch them, every detail are included. thx
Have you ever done a tour video of your garage?
we have one coming as a collab video, stay tuned in July it's coming. ✌️
First!!!!
Hell yeah! Thx bro