Hi there There are two possibilities- one is that the valve is defective, you can check for resistance and voltage. If there is open circuit resistance, then the valve is open circuit. If there is no voltage at the valve terminals then the mother board could be defective
@@theoracle6005 the valve that lets the water in from the side tank into the washer, I removed it and checked it operated it with mains voltage and it seems fine. The flow meter, I didn’t get any fault code but have ordered a new one anyway. I will post a video of what happens. It runs with no water in it. Really odd.
Hi Good question - so I removed the condenser and soaked it in Alcohol gel for a few hours and then used a very long piece of whipper shipper string to loosen the bio film and then hot pressure wash.
Hi You may have a defective washpump wherein the impeller has come loose or broken. So you can hear the pump run with no action. Second potential cause could be a damaged divertor motor which has something stuck in the vane
@@theoracle6005 where is the divertor motor is placed? in sump assembly? dishwasher is just 1 year old i can hear pump is running but no movement in upper arm lower arm is spinning slowly slowly
@@swanandchoudhary5781 Hi did you first remove the heat pump and check the impeller. The divertor is located on the lhs of the heat pump. First check the condition of the heat pump. Good Luck Choudhary
You sir, are a legend thank you!
The resovoir does not fill in mine, the tank on the side doesn’t empty…. Could my issue be the solenoid you pointed at…?
Hi there
There are two possibilities- one is that the valve is defective, you can check for resistance and voltage.
If there is open circuit resistance, then the valve is open circuit.
If there is no voltage at the valve terminals then the mother board could be defective
@@theoracle6005 the valve that lets the water in from the side tank into the washer, I removed it and checked it operated it with mains voltage and it seems fine. The flow meter, I didn’t get any fault code but have ordered a new one anyway. I will post a video of what happens. It runs with no water in it. Really odd.
@firmbutton6485 what's the model number. This is located on the top of the door jamb
How did you manage to clean that valve?
Hi
Good question - so I removed the condenser and soaked it in Alcohol gel for a few hours and then used a very long piece of whipper shipper string to loosen the bio film and then hot pressure wash.
@@theoracle6005 thank you kindly. I will try this ! Appreciate your help.
How did you remove it? I removed the 2 screws and released the 3 plastic tabs, but it feels attached at the bottom left corner @theoracle6005
@@benpenzancehave you removed it, i have the same problem that it is stuck on the bottom left.
bosch dishwasher upper and lower arms not spinning but water is coming through it
Hi
You may have a defective washpump wherein the impeller has come loose or broken. So you can hear the pump run with no action.
Second potential cause could be a damaged divertor motor which has something stuck in the vane
@@theoracle6005 where is the divertor motor is placed? in sump assembly?
dishwasher is just 1 year old i can hear pump is running but no movement in upper arm lower arm is spinning slowly slowly
Ok so first check the impeller by taking off the wash pump
@@theoracle6005 hi please tell me where is diverter located
my technician is not able to understand
bosch series 6 dishwasher
@@swanandchoudhary5781 Hi did you first remove the heat pump and check the impeller. The divertor is located on the lhs of the heat pump. First check the condition of the heat pump.
Good Luck Choudhary