How to maintain, clean and rebuild a brushed motor (for TRX-4 and other crawlers)

In this video i will show you step by step how to clean and re-grease a brushed motor.
Not all brushed motors are exacly the same but 98% willl fall in one of the two mentioned categories. If so, than these specific cleaning methods can be aplied.
Enjoy the video!

[@zoltanbazso6247]

Please how much resistance has a coil orginel rc brushles engine thank you

[@remborc]

I think a few mili ohms for the coil itself.
The resistace for the brushes depents on how dirty they are. But it also depents on how big the motor is and how many "turns" it has.
So every type of motor has his own IR. If you want to know for your motor you need to measure it of check the specifications online.

[@zoltanbazso6247]

I have a velineon engine and ESC does not know what is wrong on the engine measure Scrat I have and video Shorts@@remborc

[@remborc]

@@zoltanbazso6247 i have seen the video, i saw you have a lipo buzzer/voltage meter and you have a 2S lipo.
When you pull the throttle and the motor starts shaki g the voltage goes down to almost 6.2V. I think you battery is broken and the esc cannot take power. This the shaking motor.
-Can you measure the resistance of your lipo with you lipo charger? if so, what is the resistance?
-How old is your battery?
-can you see any damages on the electronics (all of them and also the cables?
-What charger do you have?

[@the.just.able.biker67]

That was an excellent video. I'm new to rc, so simple instructional videos like this are what I need to be watching.
I've subscribed to your channel because I've watched your speed run video with the Arrma Limitless and this one, and I've enjoyed both of them.
I'll definitely be watching some more.
Keep up the good work. 👍