@@amnanbazli hello there. You have 2 possibilities there. First your thermal sensor has gone and you have to replace it. This video has explained that part. Second your resistence who is serving to heat and is the heart of the unit is gone there you have to change the heart of the unit which probably is going to cost you third to half price of the device. Good luck.
What if the light does Not come on, does that mean that it needs another part that is not worth replacing? Mine is completely dead. I would appreciate someone’s advice. Thanks!
Hello. I was having the same issue. I replaced the Thermo Switch and the heating element starts heating if i dont screw the thermo switch in. When i screw the thermo switch in place, it doesnt work. Seems like its grounding out for some reason. Do you know what the issue could be?
Thanks for posting this video. Can you pl. let me know the complete details Make, Volt, Amp., Cutout relay temperature etc. described - mentioned on the ... I need to order ... & will help me a lot. Thanks again.
Thanks for the video, very helpful. I have the same unit and when I pulled thermostat, it was covered with gunk and hard to read part number. Can you tell me what and where did you purchase replacement part?
Our pur steam stopped working with switch light on. Searched youtube and found your video. Got the parts and fixed it. Thank you very much.
Thank you, I noted no voltage at the thermal switch, but didnt know how that part was named, thank you.
Thanks a lot. You helped me salvaging my steamer with only $6 bucks. Thanks!!
where to use that high temp silicion ? on the head of thermal switch i believe?
My steamer's power light is on but not steaming at all. Do you think changing the thermal switch will solve the problem?
I have the exact same issue. Would like to know what u think too..
i have this problem too. can anybody help?
@@amnanbazli hello there. You have 2 possibilities there. First your thermal sensor has gone and you have to replace it. This video has explained that part. Second your resistence who is serving to heat and is the heart of the unit is gone there you have to change the heart of the unit which probably is going to cost you third to half price of the device. Good luck.
What if the light does Not come on, does that mean that it needs another part that is not worth replacing? Mine is completely dead.
I would appreciate someone’s advice. Thanks!
Hello. I was having the same issue. I replaced the Thermo Switch and the heating element starts heating if i dont screw the thermo switch in. When i screw the thermo switch in place, it doesnt work. Seems like its grounding out for some reason. Do you know what the issue could be?
Excellent!! I fixed mine and saved $150.00 Great video Thank You :)
Please i have Emjoy power steamer UEGS-275, I need to know what the temperature of its thermodesk
Where do you order them from?
What is other part used in steamer , which is not shown. Sealed in sleeves. How to check Termal switch before replacing.?Please guild
i didnt know using only distilled water with this garment steamer and got stucked like yours. will try to find a thermolstat. thanks your guidline
Laura I just replaced the thermal switch and it's working again.
How much degree thermostat need in 2000W
Thanks for posting this video. Can you pl. let me know the complete details Make, Volt, Amp., Cutout relay temperature etc. described - mentioned on the ... I need to order ... & will help me a lot. Thanks again.
My Philips iron or garment steamer causes a
power failure on mains..is it got to do with thermostats?
I would check the heating element as it is drawing too much current (low element resistance) and tripping your circuit.
Excellent. It can be connected directly as a test. Unsafe to use without the fuse. Can you post a link where I may buy? Thank you.
Hi there -- can you explain how you removed the wheels?
just pull it out gently
Hello i like the video it is very useful but i have problem if i turn on the steam iron the trip will stop of the electricity of the house?
Hi I have same issue can anyone help
Hi any possible troubleshooting on this?
This is normally closed Thermostat Bimetal Disc. if you test it using a multimeter and it is open (no continuity) then you would need to change it.
Thanks for the video, very helpful. I have the same unit and when I pulled thermostat, it was covered with gunk and hard to read part number. Can you tell me what and where did you purchase replacement part?
There is also a thermal fuse on this unit. Do you know the specifications? you would normally need to replace this fuse as well.
Link for
Termoswitch
Is that an normal open or close circuit
closed
Its working but. Its coming a bad smell. Why?
Thanks
good