Part3 - Solar system install: Connecting cables to inverter and turning on the battery and inverter.
ฝัง
- เผยแพร่เมื่อ 24 ก.ค. 2024
- In this video I'm Connecting the Grid and Load cables to the inverter. I'm connecting the earth / ground wire. I'm extending the CT coil cable and connect it to the inverter. Lastly I'm switching on the battery and inverter.
---------------------------------------
-----------------------
Title: Sunset Paradise
Artist: Wonki
Genre: Electronic / Tropical
Mood: Travel / Inspirational
Sunset Paradise by Wonki @wonkimusic
Music provided by Free Music for Vlogs • (Free Music for Vlogs)...
------------------------------
• Contact the artist:
@wonkimusic
play.spotify.com/artist/5RWlSvsyw…&
-------------------
Ikson - All Night
Music by / iksonormusic
by @ikson (tag my YT channel)
All Night'
---------------------------------------------------------------
SUPPORT ARTIST: music.apple.com/se/album/go-again…3803?i=1412254261
Listen on Spotify: open.spotify.com/track/3FiIvg1A6m…EPSCOuIFCQeoBaPw
Music Production: King CAAN, Ted NightsVocals: ELYSA
Release date:
10 August 2018
King CAAN - Go Again ft. ELYSA By KING CAAN is licensed under a Creative Commons License.
---------------------------
Free Music for Vlogs------------------------------• Track Info:
Title: Reveal
Artist: Ikson
Genre: Electronic
Mood: Bright
------------------------------•
Reveal by Ikson @iksonMusic provided by Free Music for Vlogs • (Free Music for Vlogs)... - แนวปฏิบัติและการใช้ชีวิต
Very neat installation! Looking forward to Part 4 and onwards! Thanks for the effort into the video. It is really appreciated.
Thanks 😄
Yippee! like magic, wonderful simple way for the simple mind. your a star ! great help even with the butter fingers🤣
Glad you liked it!
You can actually connect the CT coil, inside the inverter, on the input AC. The Blue Nova CPS5000, witch is a Sunsynk 5KVA and a BN 5.2KWh battery, already assembled and wired with breakers and all, is wired like I mentioned.
Awesome videos !!! Well done .. this inspired me to get my very own sunsynk inverter and battery. I'll definitely be using your videos as a diy guide .. I'm looking forward to seeing the dB connections!! Well done
Thanks, next up is the solar panel install. 😄 almost done with the edit.
Very nice and detailed video.
Would appreciate if you made a video showing the wiring of the load and grid outputs of inverter to ac protection box and then to the main db
Video on that is in the pipe line. Busy working with an electical engineer on splitting of the db board into Essential and non Essential boards
Awesum series. Im from the western cape...Also do reloading... I have some nice stuff I can share with you also. Diy induction annealing
Cool, thanks
Did you used inverter supplied yellow cable for connecting bms with battery ... that yellow cable came with inverter it self . Pylon tech battery contains black bms cable
Yes i did use the yellow one from inverter, i also later on used the black ones between the batteries.
Hi! Did you just use the standard data cable to connect the Pylon battery to the inverter (ie. pin 1 to pin 1, pin 2 to pin 2 etc)? Just checking there are no crossovers in pins from inverter port to battery port?
Hi, i used the cable that was supplied with the inverter, but when i checked the ends now, it looks like a 1 to 1
Thank you for sharing nice job please send your other links to me this is no 3 I have watched 😊
Thank you, next videos coming soon
Nice video, very detailed.
How far away from your main db have you installed the inverter?
I am looking at doing something similar but I want to install the inverter in the garage which is about 22m from my db, so not sure if extending the CT that far would work
and how thick a cable I would need to run.
My inverter is 8m away. In the manual it states that you can extend the cable by another 10m.
nice installation🙃
just worried about the space, bec it looks so nice, you would want to expand at some stage, and you will need space for another 1-2 inverters and battery packs as well.
did you purchase the inverters and batteries directly from SunSynk, where can i purchase from?
what did this cost so far?
Thanks, the plan is that when I need to expand I can remove the shelvs to make space. Then I should be able to add another 4 inverters and batteries in the room. A rough guess for total cost is +- R62 000. I purchaced most of the components from www.inverter-warehouse.co.za
Great videos, really enjoying them! Is it possible to set the inverter to use grid power if there’s no solar or battery, but only charge batteries from solar?
Thanks, yes with the hybrid inverter you can.
Hi, i also recently installed a 5kw Sunsynk and it is emitting buzzing noise through the devices in my house especially PC screen and PSU. Does your unit emit any noise? I can pick it up on a sound spectrum app on my phone around 15000Hz.
Hi, Unfortunately No I do not get any of those issues. When there are big load on the system with mid day sun, I get a fan soft fan noise.I did find this in the manual.. "Installing the indoor unit, outdoor unit, power supply cable, transmission cable, and remote control cable at least 1 metre away from any television or radio receiver. This will prevent TV reception interference or radio noise. This will prevent radio signal interference from external units that might interfere with the Wi-Fi or GSM monitoring." I hope this helps, best of luck.
Awesome installation and well detailed. What cable did you use to extend the CT coil?
Thanks, i used 0.75mm twin flex cable.
How many awg(mm) have you used the grid cable and the load cable
Hi, if I remember correctly i used 6mm cable. I had some extra left over from the cable i used to connect the solar panels.
Hi, I bought the Sunsynk 5 Kw and Pylontech US3000c.Wathecd your video and connected the yellowcomms cable as you showed but no battery comms.. Can you supply me with the correct pimout for that yellow cable, it looks like a standard RJ45 fly lead?
And if possible the battery settings you use, float, charge etc
Thanks
Christoph
Hi, apologies for the late reply, I missed your comment coming in. Here is a link to a close up of the connections. The inverter should automatically pickup your charge and discharge settings.
th-cam.com/users/shorts4PJ6JlJokQE
Can the inventor operat minus connecting it to the grid?
Yes, i think if it shows a minus it could be pushing back into the grid or it could be that your CT connection is the wrong way around on your main.
Cool Video. so are you going to install an Earth / Neutral bond relay?
Thank you. yes a copper earth spike that is connected to the solar Pannel frames, and another copper earth spike that is connected to the earth wires.
@@DoSomethingEveryday are you going to get a extra battery?
Can you please explain to me how to connect power on the DB side 😃😀🙂🙃
Coming soon! I got all the components where i’ll be splitting my db into 2. One for non essential and the other one for essential. Currently finishing off recording my next video where i build a battery stand and add 2 more batteries to my setup.
Why u use fuse not breaker for battery one big braker
Hi, it was the recommended by the supplier where I bought my equipment.
Why do those look like DC cables you are using for the AC….
You are correct. :)
Why not just put your ct’s on the cable terminated on the input side of the inverter instead of extending it?
Hi, the CT is used to stop current from being pushed back into the grid and give the inerter the ability to still push current into your non essentials DB board. It need to be connected to the point where your mains enters the building / db board.