Yooo! In case you weren't already aware, RDQ has your video listed as the first video on the product page for this stack. Thought that was really cool!
I’ve had problems getting my app to hook up to the blackbox on my F7 stack in the field, but barring that, I’ll say ‘yes’ if all you use is BBE for reading logs…. For the initial tune, I rely heavily on PIDToolBox and then use BBE / SpeedyBee for tuning FeedForward…
Good time of day. There is a question. I was tempted to buy a 35A Speedy Bee F405 mini stack for whoop. And here's what's interesting, even when powered only by USB, the STM32 and the bluetooth chip are very heated. You can't keep your finger on them for a long time. But at the same time everything seems to work. For comparison, I have a Mamba F405 stack, and it's straight cold. There's some kind of stove here. Can you tell me if this is the norm for these politicians? In addition, after several firmware updates, one of the four ESC stopped being sewn. The program writes "ESC erased or unknown". Nevertheless, the motor is running. By the way, "out of the box" none of the motors rotated, only twitched at 2000 microseconds. Only after the Jazz Maverick firmware, the motors turned. The motors were also taken by speedy bee 1404, and they are also like boilers! Here is such a rabid bee))
I have tried a few different props on the squirt. Tri-blade HQ props were my go-to for a while. Once Gemfan released their 5-blade props I gave em a shot and noticed the drone was a quieter and felt smoother for FPV fly-throughs. Side note: If you choose to use the Gemfan 5-blade props on the squirt you have to trim about 1-2mm off the end of the prop so it fits in the ducts.
That's tough. Ever since getting into the FPV hobby, Mamba stacks have been very reliable and one of my go-to brands. Speedybee is definitely starting to have an impact on my fleet though. The more quads I have with speedybee the more I trust their stuff. Plus you just can't beat the built in Bluetooth for on-the-go tuning. Hope this helps!
So you can replace just the ESC when it fails, and save money and be less wasteful long term. FCs fail much less often for me, it’s often just gyros and voltage regulators. I still run a lot of AIOs personally, but when I can afford the weight and space a stack will always be superior. I do change FETs out on my AIOs and ESCs when they start going bad or fail, but realize most don’t have the skill or inclination. Happy flying!
ANYONE ON REVIEW ON THIS FLIGHT CONTROLLER ON FIRST RELEASE DID NOT TEST ON ACTUAL FPV FLIGHT JUST TALK AND TALK AND TALK SO SAD...YOU REVIEW THE PRODUCT WITHOUT USING IT HOW WE KNOW IF THE PRODUCT ITS WORTH JUST ASKING THANK U
Are you actually interested in Seeing flight footage from me tuning a drone? lol That could get pretty boring. The drone that this stack is on is flying fantastic and has been a dream to tune in the field (as mentioned). Trust me, the flight footage I'll be getting next week with it is far better than mid-tune flight footage 😉 Please be patient.
It flies very well on my Diatone 4" LR, why dont you try it and write a review instead of whining on all the review channels for this product, I guess thats beyond your capabilities.
Pretty excited about this, perfect for a new Grinderino frame build
Yes!!
Please new 2023 budget fpv build😊
Ya troncat fpv gotta make that video
Oh thanks for pining me😊😊
Yooo! In case you weren't already aware, RDQ has your video listed as the first video on the product page for this stack. Thought that was really cool!
oh snap!! I had no idea lol. Thanks for the heads up!
If you were to update the firmware to the newest version of BF do you think it's a viable option to fully tune your drone on the speedybee app?
I’ve had problems getting my app to hook up to the blackbox on my F7 stack in the field, but barring that, I’ll say ‘yes’ if all you use is BBE for reading logs…. For the initial tune, I rely heavily on PIDToolBox and then use BBE / SpeedyBee for tuning FeedForward…
I think the red C3 is just the 2.4GHz antenna for Bluetooth. and the module is in the esp32-C3
Thanks so much for making this mate 🙏🙏🙏
Can I connect any fpv camera besides dji? And what exactly is Vista hd? I just bought a cinelog 35 frame. Can you u help. It's my first build.
Hi... are you using 6s batt with xt30 socket?
Good time of day. There is a question. I was tempted to buy a 35A Speedy Bee F405 mini stack for whoop. And here's what's interesting, even when powered only by USB, the STM32 and the bluetooth chip are very heated. You can't keep your finger on them for a long time. But at the same time everything seems to work. For comparison, I have a Mamba F405 stack, and it's straight cold. There's some kind of stove here. Can you tell me if this is the norm for these politicians? In addition, after several firmware updates, one of the four ESC stopped being sewn. The program writes "ESC erased or unknown". Nevertheless, the motor is running. By the way, "out of the box" none of the motors rotated, only twitched at 2000 microseconds. Only after the Jazz Maverick firmware, the motors turned. The motors were also taken by speedy bee 1404, and they are also like boilers! Here is such a rabid bee))
2:00 I believe that C3 is the bluetooth antenna
Good video! Do you know what's the purpose of black silicone orings that are included with the stack? :)
Great video. Quick questions, Where can I get the kit for the slammed squirt. I've got a squirt v1 and would love to do the mod. Thanks in advance.
I plan on rebuilding all 3 of my shendrone squirts which this stack and walksnail
definitely need to check out this stack! side note, have you tried 3 blade props with your slammed squirt? why do you prefer 5 blade more?
I have tried a few different props on the squirt. Tri-blade HQ props were my go-to for a while.
Once Gemfan released their 5-blade props I gave em a shot and noticed the drone was a quieter and felt smoother for FPV fly-throughs.
Side note: If you choose to use the Gemfan 5-blade props on the squirt you have to trim about 1-2mm off the end of the prop so it fits in the ducts.
Would you say the speedybee f405 stacks are better than the mamba f405 stacks?
That's tough. Ever since getting into the FPV hobby, Mamba stacks have been very reliable and one of my go-to brands. Speedybee is definitely starting to have an impact on my fleet though. The more quads I have with speedybee the more I trust their stuff.
Plus you just can't beat the built in Bluetooth for on-the-go tuning.
Hope this helps!
@TRONCATFPV true. Speedybee seems especially good value ever since the mamba f405 went up in price so much
whats your go to battery for this setup? assuming you use the included xt-30.
For that 3” cinewhoop I typically use 850-1100 6s lipos
Im trying to build a real estate drone with Axisflying Cineon C25V2 frame, what motor would you get for this with this stack?
@bobnoxious RX 😅 what are the chances?!
could you add a servo to this FC?
Why use a stack vs an AIO?
So you can replace just the ESC when it fails, and save money and be less wasteful long term.
FCs fail much less often for me, it’s often just gyros and voltage regulators.
I still run a lot of AIOs personally, but when I can afford the weight and space a stack will always be superior. I do change FETs out on my AIOs and ESCs when they start going bad or fail, but realize most don’t have the skill or inclination.
Happy flying!
More uarts available for additional things like gps etc
Russian pilot voice in the background music, cool!
0:30 I believe that's not a user manual
please 2023 budget fpv drone build
ANYONE ON REVIEW ON THIS FLIGHT CONTROLLER ON FIRST RELEASE DID NOT TEST ON ACTUAL FPV FLIGHT JUST TALK AND TALK AND TALK SO SAD...YOU REVIEW THE PRODUCT WITHOUT USING IT HOW WE KNOW IF THE PRODUCT ITS WORTH JUST ASKING THANK U
Are you actually interested in Seeing flight footage from me tuning a drone? lol
That could get pretty boring.
The drone that this stack is on is flying fantastic and has been a dream to tune in the field (as mentioned).
Trust me, the flight footage I'll be getting next week with it is far better than mid-tune flight footage 😉
Please be patient.
@@TRONCATFPV wow nice thanks for that👍👍👍
It flies very well on my Diatone 4" LR, why dont you try it and write a review instead of whining on all the review channels for this product, I guess thats beyond your capabilities.