The compressor switch is high pressure. The dryer switch is low pressure. They both should be present. They are wired in series. Too high or too low, the correct switch opens and disconnects the 12v dc from the compressor. Do NOT install it on the dryer.
VICKY IS THE COOLEST PERSON! She's an amazing wife, mother, and is a good friend to others. A perfect lady that brightens up the room with her warm smile 😁. She always helps out and chips in to help as best as she can for the people she loves. YOU ROCK VICKY! Keep up the good work on taking care of your amazing racing family. Another great video 📸. Have a good day today 😎🌞. Thanks.
Everytime I watch your videos it reminds me of days gone by granted we didn't run cars of your caliber but it still takes me back to that place and time.
Can’t wait to see the 55 back at your place! I just picked up a nearly rust free 55 4 door 210 and plan on doing a 2 door conversion and a nice small block swap. It has 72k original miles and the 6 still runs like a sewing machine.
I'm glad you all had a awesome Christmas, Wyatt never fails to put a smile on my face, he's such a happy boy with awesome parents and grandparents. I'm impressed with your 427 sb Bill for it to go that long after the oil pressure issue, that's a true testimony to uncle Bob's work. Hope everyone has a safe and happy new year. I'm looking forward to the sick week video. God bless and as always be safe.
THANKS FOR SHARING AN AMAZING LOVING FAMILY MOMENT, THE MODEL FAMILY UNIT THAT OTHERS CAN ADMIRE DURING THE HOLIDAYS. Great video that's very appreciated! Keep up the good work 👍. Have a good day today. Loved the video! Thanks.
Bill I think you're gonna like the soild roller. I've put 3000 + miles on a old old .600 roller in my Nova.. it's old comp stuff with a rev kit. Took valve covers off once to check everything and no problems at all. Didn't even have to reset lash
More stroke, goes good with NX. When a roller doesnt roll,it's wiped. Their is a way of cutting the locks off the rod bearings. Somehow pen the bearings. It keeps the bearing from spinning. I've seen literature in a GM machinest guide. It had the 3.8 Buick. All the stainless crank motors. Geometry of cutting rotating mass. I'm sure,Bob has got em all, Ford Bible. I'd like to see, secrets, and process, of a build,in depth. Well I thought it would be good content. Thanks for the ride.
Bill, that sucks about the 421. I was always lery of something like that on my 421, which is why i installed an oil pressure switch and a bright-azz Autometer light...just for oil pressure (or actually a LACK of pressure). If that light EVER came on then I could instantly kill ignition and coast to a stop, wherever I might find myself.
Everytime I Built a 400 SBC and used Non 400 Heads with Steam Holes I always Drilled the new heads to eliminate dead areas between Syamese Cylinders on a 400
Bill thanks for another great video. I look forward to seeing all of your videos and adventures in life. Thanks again for sharing the best family and friends anyone could ask for. Merry Christmas and Happy New Year
Up with heartburn! This video couldn't have come at a more perfect time! Thank you! 😊 Tommy's motor is looking sharp in the Malibu! Can't wait til all the electrical and nitrous issues are fixed so we can see what it runs! So glad the nitrous didn’t spray in Florida so you can still use that motor! 😬
@@bustedknuckles6051Interesting have to look this water fasting up,I suffer from heartburn and don't like taking meds. Their just a temporary fix and my gut doesn't like meds either. Take care of 1 thing 4 another issue to show itself.
@@KTL72-ul7ej just water and black coffee, no food. I did make some homemade electrolytes with a recipe online called snake juice to keep from getting cramps or anything.
@@kaedyncopper12 exactly. Don't over complicate it, the only thing I would recommend is doing keto for a week or two leading up to it or it really sucks. Last year I did it and didn't eat keto leading up to it and dealt with nausea and feeling absolutely terrible the whole time. Ended up quitting on the 6th day because I was dry heaving, but the year I did it following keto It wasn't even that bad, just a mental game.
Mannnn part way through now. I hope that kid had a good Christmas and mom and dad came to their senses and just buzzed the rest off. It’ll grow back, shit happens!
I see you still have the bypass in the filter adaptor on the 421. Block that bypass, a lot more oil than you think goes through that bypass. Just tap it for a 1/4” pipe plug, and install a hex pipe plug from the inside of the adaptor. Don’t use a wix racing filter. They don’t filter as small a micron partical. Use one of these filters. Mobil 1 M1-302 Wix 51061 Purolator PBL34631 Fram Ultra Synthetic XG5 Ac delco PF1218A AC Delco PF35L Baldwin B6-HPG Donaldson P166564 Fleetguard LF3488 K&N HP-3003
There's always something, isn't there Bill !! Little things that bite you and take time, but it looks like you've got it under control. And another family adventure is sooo cool ! And as I've said before--Wyatt has no idea how great his life is, and will continue to be, with a family like yours ! Hey, I was watching House Of Pearls last video on dad's '55 and it's looking unbelieveable !! That paint is like liquid glass---so deep !! HAPPY NEW YEAR everyone.
Happy New Year!!! Can't wait to see what bring on 2025 for y'all! It's getting bigger and bigger than ever for anything y'all put mind into! Have a great journey!
This is why I love my dart shp block. Primary main oiling so you hear valve train noise first anytime there is oil level issue. I can't count how many times this has saved me, kinda embarrassing to admit but it is what it is race car motor and ring gap makes a fun driver but needy when it comes to fuel and oil.
What a great surprise Sunday night video saw Dad‘s 55 house of pearls video. Outstanding Can’t wait for sick week. Wish you guys luck. Enjoy the experience. Merry Christmas and happy new year.
Just what I needed for this Monday morning another video from da ol man thanks Bill for everything you do I love all of your families channels Happy New Year ❤
Ive had to massage those cast BB valve covers before. Had to cut back corners off on a diagonal and weld flat plates in to clear firewall. After repolishing them they looked fine.
Shifting at 7000 into 3rd at Bradenton noticed that oil pressure was 0😮. Took the 468 Chevelle engine apart. I got lucky it was fine. Just a broken oil pump shaft.
Turn the crank, order 10 over bearings, clean it up and grab a new cam lifters and pound some new cam bearings in. Inspect oil pump if it's chewed up grab another. I don't see the point in tossing that rotating assembly unless you are wanting to lower the compression ratio to be more pump gas friendly for drag and drives. Even then you could have Bob mill some of the dome off the piston to drop the CR. Unfortunately you run E85 so you'd have to swap carbs to run normal pump gas. Another option you could also put it back together on the cheap mentioned above and do another give away. To fund something even nicer. The Trick flow heads are holding you back. If I had a 13:1 421 and only made 560 I'd be upset thats 383 numbers. Spier makes a badass 23 degree head that'll has thrown down over 900hp (Solid roller) but mid 700s with with some Johnson 2116SBR slow leak down lifters seems very doable especially in the form of a 427 or 434 just gotta get with Isky with the new head flow numbers and come up with a better suited grind. Call it the "Scrapper" in honor of your 4 leg'd wing man.
HEY BILL ...Im pretty sure the high pressure switch will have to go in the bigh pressure line for it to work properly!!! Just a heads up to keep from.future problems
I’m excited to see how that 415 runs and also to see what you do with your engine. I’m going to build a 4?? For my Impala and I’m curious to see what you build and what kind of power it makes.
CVF builds nice stuff. I run their electric vac pumps on a few of my cars. Curious to see how that smaller Sanden AC compressor does in the southern heat at idle. The Sanden SD B710 CVF uses is 6.6 cu.in. vs the GM/Harrison R4 10.0 cu.in./per rev. In Texas 95-105 heat I typically see the evaporator temps rise at idle due to the lower Freon flow.
Damn.. give the poor kid a buzz cut that's diabolical😂
Seriously…no haircut should “go wrong” and end with that abomination as the best possible outcome…😂😂😂 poor kiddo lol
Hahahaha I thought. “ shit is that kid amish?” 😅
That Opie cut was as bad as that flat spotted Roller camshaft 😂🤣😂🤣
Hahahah Christmas Eve haircut on the nephew was hilarious
Must be adopted
That and the " Let it snow"
" look you know we're old we can read it " had me rolling too 😂😂
Cookie the 🤡 clown.
Reminds me of myself
When I thought I would give myself a haircut oops
Poor kid! LOL
The compressor switch is high pressure. The dryer switch is low pressure. They both should be present. They are wired in series. Too high or too low, the correct switch opens and disconnects the 12v dc from the compressor. Do NOT install it on the dryer.
😂😂😂😂😂😂😂😂
VICKY IS THE COOLEST PERSON! She's an amazing wife, mother, and is a good friend to others. A perfect lady that brightens up the room with her warm smile 😁. She always helps out and chips in to help as best as she can for the people she loves. YOU ROCK VICKY! Keep up the good work on taking care of your amazing racing family. Another great video 📸. Have a good day today 😎🌞. Thanks.
I'm glad Mark is a staple on this channel,,,, the banter between him, Bill and Bucko is great
"It works when it's empty" had me rolling.
Everytime I watch your videos it reminds me of days gone by granted we didn't run cars of your caliber but it still takes me back to that place and time.
That hair cut commentary was perfect 😂
The A/C switch is a high pressure cutout. It won't work putting it on the accumulator.
Yes Correct, Needs to plum in the High side, when he has new hoses made add the valve core fitting to screw it back in.
I was wondering that, question is, where was the low side switch at? That a fixed orrifice tube cycling clutch system, correct?
Yes. That's high side on compressor, not low side. Almost made the same comment to let him know. Nice catch. 😊
Look forward to see the sick week run! Don’t forget to have fun along the way no matter what happens!
Can’t wait to see the 55 back at your place!
I just picked up a nearly rust free 55 4 door 210 and plan on doing a 2 door conversion and a nice small block swap. It has 72k original miles and the 6 still runs like a sewing machine.
It works when it's empty! 😂😂😂
Hope you're all having a fabulously blessed holiday season!
~~Dave
Merry Christmas and Happy New Year to the whole OMG/SRC Family!
I'm glad you all had a awesome Christmas, Wyatt never fails to put a smile on my face, he's such a happy boy with awesome parents and grandparents. I'm impressed with your 427 sb Bill for it to go that long after the oil pressure issue, that's a true testimony to uncle Bob's work. Hope everyone has a safe and happy new year. I'm looking forward to the sick week video. God bless and as always be safe.
Great to see the whole family having fun.I can't wait for Dad to see the 55 with that beautiful paint.
Good times with family during the holidays ✨ and working on cars ✨ my kind of people 😊
Uncle Bob thought just by taking on your guys's engines that he'd get a little bit less work seems like he's doing just as much work 😂😂 he's awesome
Very informative Bill. Let the good times roll. ✌✌✌✌✌✌
THANKS FOR SHARING AN AMAZING LOVING FAMILY MOMENT, THE MODEL FAMILY UNIT THAT OTHERS CAN ADMIRE DURING THE HOLIDAYS. Great video that's very appreciated! Keep up the good work 👍. Have a good day today. Loved the video! Thanks.
Good video. I appreciate you sharing your love for family and fast cars with me. It means more than you know. Happy New Year ya'll!
Good luck down in Florida! Love your channel!
Bill I think you're gonna like the soild roller. I've put 3000 + miles on a old old .600 roller in my Nova.. it's old comp stuff with a rev kit. Took valve covers off once to check everything and no problems at all. Didn't even have to reset lash
More stroke, goes good with NX. When a roller doesnt roll,it's wiped.
Their is a way of cutting the locks off the rod bearings. Somehow pen the bearings. It keeps the bearing from spinning. I've seen literature in a GM machinest guide. It had the 3.8 Buick. All the stainless crank motors. Geometry of cutting rotating mass. I'm sure,Bob has got em all, Ford Bible.
I'd like to see, secrets, and process, of a build,in depth. Well I thought it would be good content.
Thanks for the ride.
Poor old Uncle Bob's up to his arm pits in engines. I thought you were going to make his life easier lol.
He didn't look to happy he's probably thinking " what have I got myself into "
Nice seeing everyone have a wonderful Christmas.!
Bill, that sucks about the 421. I was always lery of something like that on my 421, which is why i installed an oil pressure switch and a bright-azz Autometer light...just for oil pressure (or actually a LACK of pressure). If that light EVER came on then I could instantly kill ignition and coast to a stop, wherever I might find myself.
That was too funny. We’re old enough to read script writing God love you guys.
I like when he said, it’s work when it’s on empty 👍🏽
Uncle Terry is such a wholesome guy.
Malibu looks good old man. Come on south, weather is nice. Sunshine and blue skies! 😎 👊
Good luck getting all put together for sick week !! Happy new year
See you soon Bill! Good luck getting everything sorted!🤞🤞🤞
Sick Week should be fun.... Have a safe and fun New Years..
Everytime I Built a 400 SBC and used Non 400 Heads with Steam Holes
I always Drilled the new heads to eliminate dead areas between Syamese Cylinders on a 400
Damn Bill- was just working on my buddies car for Sick Week, im eyeball deep in, gonna be fun!
MY FAVORITE GARAGE CHANNEL !!!
BILL HOPE YOUR FAMILY HAD A MERRY CHRISTMAS AND I WISH YOU A HAPPY NEW YEAR 2025 !
GOD BLESS 👍🏼😁👍🏼
Hope y'all have a great year
Your channels have kept me believing I can also build my own hot rod
Please don't stop
Good luck Bill! Hopefully all goes very well for you guys! Have fun and be safe ❤
Bill thanks for another great video. I look forward to seeing all of your videos and adventures in life. Thanks again for sharing the best family and friends anyone could ask for. Merry Christmas and Happy New Year
One of the benefits of working nights. Thanks for the upload.
Bowl cut, poor little guy!! I'm hoping your Christmas was excellent. I hope your upcoming new years is safe and fun!!
Up with heartburn! This video couldn't have come at a more perfect time! Thank you! 😊 Tommy's motor is looking sharp in the Malibu! Can't wait til all the electrical and nitrous issues are fixed so we can see what it runs! So glad the nitrous didn’t spray in Florida so you can still use that motor! 😬
I had heartburn for YEARS. Fixed it 2 years ago but doing a 7 day water fast, haven't dealt with it since and it was a almost daily issue before.
@@bustedknuckles6051Interesting have to look this water fasting up,I suffer from heartburn and don't like taking meds. Their just a temporary fix and my gut doesn't like meds either. Take care of 1 thing 4 another issue to show itself.
@@bustedknuckles6051 interesting!! So just water and no food for 7 days, or water as your only beverage for 7 days?
@@KTL72-ul7ej just water and black coffee, no food. I did make some homemade electrolytes with a recipe online called snake juice to keep from getting cramps or anything.
@@kaedyncopper12 exactly. Don't over complicate it, the only thing I would recommend is doing keto for a week or two leading up to it or it really sucks. Last year I did it and didn't eat keto leading up to it and dealt with nausea and feeling absolutely terrible the whole time. Ended up quitting on the 6th day because I was dry heaving, but the year I did it following keto It wasn't even that bad, just a mental game.
Mannnn part way through now. I hope that kid had a good Christmas and mom and dad came to their senses and just buzzed the rest off. It’ll grow back, shit happens!
I see you still have the bypass in the filter adaptor on the 421.
Block that bypass, a lot more oil than you think goes through that bypass. Just tap it for a 1/4” pipe plug, and install a hex pipe plug from the inside of the adaptor.
Don’t use a wix racing filter. They don’t filter as small a micron partical. Use one of these filters.
Mobil 1 M1-302
Wix 51061
Purolator PBL34631
Fram Ultra Synthetic XG5
Ac delco PF1218A
AC Delco PF35L
Baldwin B6-HPG
Donaldson P166564
Fleetguard LF3488
K&N HP-3003
I can't wait to see you guys at Sick Week. Looking forward to the festivities
There's always something, isn't there Bill !! Little things that bite you and take time, but it looks like you've got it under control. And another family adventure is sooo cool ! And as I've said before--Wyatt has no idea how great his life is, and will continue to be, with a family like yours ! Hey, I was watching House Of Pearls last video on dad's '55 and it's looking unbelieveable !! That paint is like liquid glass---so deep !! HAPPY NEW YEAR everyone.
Thanks for the Christmas light tour. A Very Merry Christmas and Happy New Year from Montreal Quebec Canada.
Happy New Year!!! Can't wait to see what bring on 2025 for y'all! It's getting bigger and bigger than ever for anything y'all put mind into! Have a great journey!
Love all 3 channels.. Happy New Year to all of yall...
Happy new year guys it’s the year of freedom 🇺🇸
This is why I love my dart shp block. Primary main oiling so you hear valve train noise first anytime there is oil level issue. I can't count how many times this has saved me, kinda embarrassing to admit but it is what it is race car motor and ring gap makes a fun driver but needy when it comes to fuel and oil.
Steel rocker arms will save you a lot of headaches. got tired of replacing the aluminiun rocker arms one at a time before switching over.
What a great surprise Sunday night video saw Dad‘s 55 house of pearls video. Outstanding Can’t wait for sick week. Wish you guys luck. Enjoy the experience. Merry Christmas and happy new year.
Wishing a Merry Christmas and a Happy and Prosperous New Year to the entire Hoskinson family !
Can't wait to see that notice come on love this channel best stuff on you tube
TKS for sharing an may U All have a great new year.
Awesome video and Happy New Year 🎉🎉🎉❤
Merry Christmas and Happy New Year !!
Glad to see the Malibu has an engine to use until yours is rebuilt. Sucks to see it messed up though.
Merry Christmas OMG Bill, Mrs.Vicky, and Family and Team, Friends
Have a Great Day 👍
God Bless You and your Family 🙏
Ya you TANNER
Just what I needed for this Monday morning another video from da ol man thanks Bill for everything you do I love all of your families channels Happy New Year ❤
The old mans old man sure looked happy holding and petting that ween!!! Maybe ol dad needs a 4 legged friend!❤
Happy New Year! Good luck in Florida!
Looks like everyone had a great Christmas! Hope everyone has a wonderful New Year's!!!
Thanks for letting us come along for the ride 🙏🏾💪🏾🇺🇲✅💯👍🏾
I'm not sleeping tonight.Just wish I could go to work now. Really appreciate the video Bill
dang bill,im up 156 am with last beer,now i gotta stay up later lol.
Happy new year, and a late Merry Christmas to you and your family bill!
Im excited to see Marks car back together, hopefully we see it running down the track at some of the events you all are at!
Ive had to massage those cast BB valve covers before. Had to cut back corners off on a diagonal and weld flat plates in to clear firewall. After repolishing them they looked fine.
I hope you guys had a good Christmas and happy new year and good luck and be safe and God bless you guys
Merry Christmas Bill and family, thanks for another great video!!!
Happy New Year from South Florida !
Coming to see you guys in Florida! Don't be trying to hide Bill! Lol
I lost my father a few days before Christmas... Christmas was a hard pill to swallow!!
Happy New Year bill and Vickie and the rest of the Hoskinson family...
Best channels on TH-cam. All 3 rock!
Hey Bill I would like to wish everyone a Happy New Year
Can’t wait for the next video, really enjoy watching your videos.
Good luck to you all and Happy New Years.
Hey Bill! Once again another fantastic video! Always look forward to every new video. As always stay safe. 😃😃❤️
Shifting at 7000 into 3rd at Bradenton noticed that oil pressure was 0😮. Took the 468 Chevelle engine apart. I got lucky it was fine. Just a broken oil pump shaft.
Merry Christmas to you and your family And a Happy New Year🎉🧨💥🎊..🙏🇺🇸
Merry Christmas and Happy New Year to all of y'all as well Bill.
The 64 is such a good looking truck, hopefully one day it will make it to the house of pearls
Turn the crank, order 10 over bearings, clean it up and grab a new cam lifters and pound some new cam bearings in. Inspect oil pump if it's chewed up grab another. I don't see the point in tossing that rotating assembly unless you are wanting to lower the compression ratio to be more pump gas friendly for drag and drives. Even then you could have Bob mill some of the dome off the piston to drop the CR.
Unfortunately you run E85 so you'd have to swap carbs to run normal pump gas.
Another option you could also put it back together on the cheap mentioned above and do another give away. To fund something even nicer. The Trick flow heads are holding you back. If I had a 13:1 421 and only made 560 I'd be upset thats 383 numbers. Spier makes a badass 23 degree head that'll has thrown down over 900hp (Solid roller) but mid 700s with with some Johnson 2116SBR slow leak down lifters seems very doable especially in the form of a 427 or 434 just gotta get with Isky with the new head flow numbers and come up with a better suited grind. Call it the "Scrapper" in honor of your 4 leg'd wing man.
HEY BILL ...Im pretty sure the high pressure switch will have to go in the bigh pressure line for it to work properly!!! Just a heads up to keep from.future problems
Happy Holidays!!!
I’m excited to see how that 415 runs and also to see what you do with your engine. I’m going to build a 4?? For my Impala and I’m curious to see what you build and what kind of power it makes.
Happy New Year to you and your family. Unfortunately, I won't make it down there to see you guys. One of these day
CVF builds nice stuff. I run their electric vac pumps on a few of my cars. Curious to see how that smaller Sanden AC compressor does in the southern heat at idle. The Sanden SD B710 CVF uses is 6.6 cu.in. vs the GM/Harrison R4 10.0 cu.in./per rev. In Texas 95-105 heat I typically see the evaporator temps rise at idle due to the lower Freon flow.
That little kid with the amazing hair cut looks like the Raiders owner, go look him up.
😂😂😂
The 55s's lookin sooooo gooood bill 🤤
Great video Bill can't wait till the sick week video keep them coming love them
I had the same thing on my big block. Never lost oil pressure but broke the pan and it still wiped the bearings.
the switch on the compressor is high side cut out. the other one is low presser cycling.
Wish i could be there hope you all have a safe and fun trip
Happy Holidays !! As always another great video . Looking forward to a Dyno video !!!
Great video! Can't wait to hear Marks BBC!
Late night upload. Love it