Hey Tyler, I saw you were using a propane torch, id recommend getting a map torch, burns a little hotter, so you hade to spend less time heating up stuff, thanks for your time!
I ran into the exact same problem today, while I was trying to put my cr125 back together (was hoping to have the thing finished this weekend) but quickly realised that I had been sent the wrong crank seals so now I gotta wait for those, that’s bike for ya haha, loving the build series tho mate keep em coming 🤟
Nate bennett I agree with you on heating up the cases evenly in an oven but it clearly was the counter top that warped when he was heating the case up with the torch not the case itself, you can even see the burn spots on the table after he heated them.
Tyler, if you read this I just wanted to know if the wrench rabbit kit acctuly came with everything or did you need to order other stuff for the engine after?
You should let me ceramic coat the whole bike. Ill do it for free for a plug. Simple easy clean up the dirt will wash right off with a hose and nothing will get stained.
What? Wd40 isnt water based... wd stands for Water displacement... why would it contain water when its made to get rid of water 😂. Its not a good lubricant i agree there, but its not going to hurt anything.
Anyone else notice how many times Tyler hit the wrench rabbits box? Love the vids 🤘🏻
Zach Fuquay I was about to comment that 😂😂
was just about to say that
I watched almost every single one of your videos in my favorite ones are the pit bike videos
Mike French his pitbike as your profile pic lol
That bike is gonna be lit
A good trick for figuring the bolt thread engagement in aluminum is 1.5 times the diameter, 6mm thread should have 9mm of engagement.
I never knew that. Thanks
Vapor blast looks minty fresh !
We love the shout out Tyler. You make specbolt look good!!
Nice work , that hardware and vapor blasting makes a world of difference . Looking forward to the day I can do a similar build
Love the builds man keep them up
Just a tip Tyler you can even place bearings in freezer for at least 20 min before placing them in the crank cases real smooth fit
You can get the crankcase overflow/breather hose rubber piece in with the cases together.
Hey Tyler, I saw you were using a propane torch, id recommend getting a map torch, burns a little hotter, so you hade to spend less time heating up stuff, thanks for your time!
No.never use map gas on aluminium it's to harsh.
Man you really like that wrench rabbits kit box, you must have hit the box at least 20 times😂
Most satisfying engine build I’ve ever watched 🚀
You should do a crf150r build as a pit bike
You need to get one of the old 80 model cr's and build it. Those are some strong bikes!
Looks so mint Tyler. You do great work
I ran into the exact same problem today, while I was trying to put my cr125 back together (was hoping to have the thing finished this weekend) but quickly realised that I had been sent the wrong crank seals so now I gotta wait for those, that’s bike for ya haha, loving the build series tho mate keep em coming 🤟
Rentons Clips should have got a kawi 🤷♀️
No lock tight on the bearing retainer screws?
Cant wait till its finished
Just had to flex on us with the AirPods real quick in the beginning 😂
I don’t know much about bike engines yet what does the heat do to put the bearings in?? 🤔
Breather hose no problem put mine in afterwards may need a pick or flat screwdriver
1:45 did it warp when you were heating it up?? look at the kickstart side when its being heated, you can see it rise
Yeah bro I saw that,really should heat up Ali cases evenly,in an oven.this guy is rookie as fuk.
Nate bennett I agree with you on heating up the cases evenly in an oven but it clearly was the counter top that warped when he was heating the case up with the torch not the case itself, you can even see the burn spots on the table after he heated them.
Very cool. Would u have to give the engine a run-in period (break in) as u would with a new engine?
Flexed the AirPods 😂😂 and be careful with the pegs that sharp; they’ll tear your boots up and your shins if you ever accidentally hit them 😂
Those pegs are going to look rough after only a couple rides. Duracoat or cerakote them.
naaa bro just polish ur feet before every ride haha! but fr good vid
Cant wait to see the bike runing
Where did you learn to do the engines and things?
what is the song called that starts at 8:08 ?
I love watching dirtbike rebuilds
Hey Tyler random question but where did you get you ramp for your ute with the step on it
You should REALLY REALLYYYY get a Phathead Racing cylinder head cap for the cr. It would totally make the end look of the build.
Do you put all the bearings in the freezer and heat up the cases or just heat up the cases??
Sik build man,well in pal ✌🏻
When you riding the kx250f and kx125?
What song is that when you’re sharpening the pegs
this thing is gonna look fuckin sweet once it's finished
Best youtuber
🤣🤣🤣🤣🤣🤣🤣
Song at 8:30 ?
Nice work Tyler look great bro keep up the awesome work
Can't wait for that 2 smoker
Why does he heat it up
I hope we get to see this bike get ridden. All we see is Alta and pit bikes. I wanna see 2 stroke track days!!
You should get some covers powder coated
Will the bike have dual exhaust ??
That would be very cool
BRO ROOKIE he prolly won’t do it
Aaaaaaa nice vid can't wait to see more
Is this supposed to be part 7 or 8?
Hey Tyler, did you use crank case puller to put cases together or did you just heat main bearings up?
Good video man
Combing along fast
U should use bed liner on your foot pegs it wont rub off
Loved the video, what kind of paint did you use on the foot pegs.
Yo Tyler sweat vid. How many more vids till the bikes done ✅
Nice video!
I love your videos I have watched almost all of them and I love every single one of them
good work
Tyler, if you read this I just wanted to know if the wrench rabbit kit acctuly came with everything or did you need to order other stuff for the engine after?
Does anyone know a place to get bearing for my 2009 aprilia sx 125
next build kx500
Sick cr125r I have a 2003 cr125r
Nice!
7:45 did anyone else saw that he put the cylinder head backwards ?
Dope!
i wouldn't trust hot rods... get a crank works microbalance crank.. no vibration and its very reliable having them balanced
im doing one too!
Good dzop very nays moto
You sharpened your pegs!??? 😂
Bring your e bike to the track for next video
Your the best
Get a quad or a little 85 dirt bike
0:20 you don’t speak broke?
he love you vids
Sup Tyler
Hello
That look sweat
You should let me ceramic coat the whole bike. Ill do it for free for a plug. Simple easy clean up the dirt will wash right off with a hose and nothing will get stained.
0:23 did anyone here the snapchat filter and think it was there phone
plz change the soundtrack it sound like im listening to Wii sports menu section
hi
Ur a little annoying at times but a pretty cool guy nice work on the engine looks good great vid cheers dude awesome👌🏻
Looks nice only problem is that it’s a Honda
WD-40 = WATER DISPENSER-40 so you might not want to use that as a lube dude what the hell
Water displacement.
@@jman71890 correct
chur
Hu
Tyler u should do a kx 250f vs the kx 125 race. Like if u agree
First
Can I please get a shoutout??
Stop making Cr in 2007
Don’t use wd-40 to lube the inside of ur engine !!!!!!!!!!! ITS WATER BASED
What? Wd40 isnt water based... wd stands for Water displacement... why would it contain water when its made to get rid of water 😂. Its not a good lubricant i agree there, but its not going to hurt anything.
Anyone else getting bored?