Bee Wagon Bed Modifications (Pt. 2)
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- Starting to put the flatbed back together. I have to overcome a bit of a problem early on but eventually get to start tacking pieces back on and welding out. #metalfab #flatbedtruck #silverado #silverado5500 #chevy #chevrolet #forklift #welding #welder #millerwelders #multimatic255 #beekeeping #beekeeper #ezyloader #ezyloader300 #ezyloader300mh
SUBSCRIBE here: / @hefleyhives
Want HONEY? hefleyhives.sq...
For other updates: / hefleyhoney
All looking great. Be good to see the finished product an heading to the bee yards to work. Thanks
👍Can't wait to put it to work!
Just another thought on the backside of your square hole do you think there needs to be a piece of 4” channel going side to side in between the ones on each side going front to back. Just to have one on all four sides of the piece on the loader coming through the floor . 🤷♂️🤷♂️🤷♂️. What is the weight lifting limit on the lift all the way out .
I don't think so. That area is very strong as it is. It's only supporting a small portion of the loader weight.
It's rated for 300kg or 661lbs
@@hefleyhives thanks . That is a pretty good amount of weight for as long as it is . That would sure save a old body like mine . It looks like you did a great job on upgrades . I hope it works great for you .
Did you watch @aCanadianBeekeepersBlog video about him building his new bed for his easyloader? He ran into a couple hitches while building his that he had to work around. While I would want the boom in the back of the bed so I could do trailers, you do have a couple good points. Advantages of doing it your way, better gas mileage, better stability being in center of truck mass, less likely to back into something with it, better visibility behind truck and no being just that half an inch too short on the bed as you could overhang if need bee. I don't think you are overthinking things at all, better slow and steady than to run with it to have to redo it.
Yes I saw his video. My bed is a little different and my fuel tank is not in the way. I show why in the next video
😲👍👍👍
👌