Part 41! 1968 VW Radical Custom Ian Roussel Revises The Roof Line 🤓
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Part 41! 1968 VW Radical Custom Ian Roussel Revises The Roof Line 🤓
The roof structure of this custom VW appeared to have the opportunity to deform as the bodywork continued on the roof. Tune in to see if Ian can "truss" this......
We are getting close to 100k SUBSCRIBERS! Please subscribe if you haven't and SET YOUR NOTIFICATIONS!
There are no rules in car customization, and if there was a rule it would be to go as far outside of the box as your fabrication skills can take you. Ian envisioned a simple and radical solution to this style of door opening. He walks himself and Jamie through the process, with pretty satisfying results. This is only the beginning. Come journey with Ian out of this world fully into the outer space of KUSTOMS. 🛸 🛸 🛸 🛸
"Car Building Is Fun! Lets keep it that way."~ Ian Roussel
The backstory...
Ian has decided to lower this VW Beetle 6 inches to get it to the ground and start radically modifying this beat up 1968 VW Beetle, but like most things that were once going to find the fate of the crusher, he once again proves you can do some amazing things in your garage with some imagination, fearlessness and a willingness to make mistakes as you create. 🥴
His fascination stems from the seemingly limitless customization opportunities for this vehicle. Join Ian on a wild ride through his mind 👽 as he envisions then fabricates his most radical ideas to date.
Ian worked and studied at a bronze casting foundry as a young man, where he learned to create models, armatures, molds and finished sculptural artwork in all mediums and finishes. Ian is fascinated by the artistic process of sculpture. He brings this knowledge to his car customizations, to his TV show audience, and now he brings it to you, his growing TH-cam audience.
IF YOU ENJOYED THIS CONTENT
🛸 SUBSCRIBE
🛸LIKE
🛸COMMENT
🛸SHARE
🛸SET YOUR NOTIFICATIONS SO YOU DO NOT MISS ANY NEW CONTENT
Ian's Address📪
I.R. (For Large Packages 📦 Make It Out to Mojave Post Office #122)
PO Box 122
Mojave California 93502
We also have an amazon store for you to shop some of the basics we use at our rural ranch!
www.amazon.com...
Follow Ian and Jamie on Instagram👽
@Full_Custom_Ian
@Mrs_Roussel_
👩🏻🎨Follow Our Artist Who Created Our Hot Rod UFO Design on Instagram
@thechookyhand
👨🏻🎨Animation Done By The One and Only
@corvette.mike on Instagram
Happy Sunday! Remember to leave us a COMMENT and check if you are SUBSCRIBED and set your NOTIFICATIONS.... Also, don't forget to give us a thumbs up! We appreciate all of you and Jamie is happy to see the push to 100K! This build is getting really HOT! Have a great week! ~ The Roussels
Wow Ian, that made a tremendous impact on the looks.
I see it also making for a better finish of the original roof line and upper door lines. Excellent job once again using the invisioning tools...
When you first started I thought you where going for a Tom Daniel's Red Baron Hot-Rod (1969) style with the helmet top, but quickly realized nope. The direction you are going in will be much much better.
I love all of Ian’s builds he does awesome work ,used to watch him on tv so glad to have him on Utube I subscribed to your channel,when I saw him on hope you both feel better soon keep up the wonderful work I love it
😎👍
That curve in the roof is exactly what it needed. Great viewer tip.
As a garage fabricator, sometimes it's hard to redo shit you've spent so much time doing. But, watching your channel makes me realize I can do whatever I want, even if I have to abandon some hard work.
I agree it’s hard to redo something you spent time on
Exactly!
THAT, is what sets him apart.
Wow! That brace in the roof was the ticket! I could tell as soon as you flipped it over that the shape is way better! 👍🏼👍🏼
The patience required for builds like this is next level and most people don’t understand! Fitting ,refinement ,more fitting, altering then some more refinement! All ending with visionary perfection ! Excellent work Ian ❤
Thank you!
The unedited process of a master car builder and great capturing through the expert camera work(and commentary) is absolutely spell binding. You guys have struck a chord!
Thank you! We are really having fun in this medium 😎👽
The more I watch you - the more enjoyment I get.
Thank you both for sharing!
I could hear Ian’s bolts and whistles brain working like 100 miles per hour and he did it again 👏👏👏👏. Awesome job Ian! Hi Jamie & Ian, please get well and get healthy soon. 👋👏👏👏💜
I have to say, I’ve been working with fiberglass matting for years and always brushed the resin on the vehicle, put the mat on, then brushed more over it. Today I did it like you showed a few videos back, damn is that an awesome way to do it! Uses less resin and way faster! Love your show and these videos are just freaking awesome! Thank you for having the patience to teach us all some new tricks!
Putting that truss in has improved the roof line immensely, it's gorgeous a nice subtle curve to it now 😀 👍
i learnt long ago with watchin Ian, if he changes things part way through its always gonna get so much better..he forsees what he wants then possibly sees even better part way. 5 star stuff as usual.
You’re a lucky man,sir. You have a partner that understands what you’re doing, makes supporting comments, is your camera person, and seems to love being in your shop with you. Bravo
That worked out perfect! Love the shape this thing is taking!
It's not TV magic. It's Ian magic !!
...it's not magic at all, it's auto building madness at it's finest...-theautojunkie-
Two words- Ratchet Wrench 🔧 I use them more than regular ratchets now. 🙂 Since I’m on the subject of “ratchet” I would’ve used a ratchet strap side to side around the roof to hold it while I slid it into place then pulled the strap out after both sides were in under the metal skin. I love watching you work man. I wish I was right there helping/learning/adding. Thanks for all the hard work making these videos guys. ✌️ peace
The roof looks a lot better! Good job guys!
What a fit. Brother, you're a genius. you will always make it work
That looks so much better. The roof looks part of the car now, not just plonked on top. Love it.
You are my favorite builder out there i love watching the way you do your work
Let the roof sit in the Mohave sun, and the fiberglass will relax consequently, the stress will disappear !
I'm really enjoying this build!
I can tell by how you mounted the over curved spine that you are a Sk8r punk from the day. It's that teenaged rebellion that we grew up with that inspires your creativity and it's why I love this channel. I have not one critique, but I can't praise you guys enough.
Big Love! 😎😎
Looks much better now. Keep it coming. Thanks
It looks super cool with out that roof on it
Car is looking real good. Slick trick using the angle iron as the truss.
I really appreciate how much content you guys are putting out. Doing a great job of being informative and engaging. It's a lot of fun watching the two of you get better and better at this. Keep it up!
Wow thank you. We really appreciate the support of our channel. It really is a labor of love on both our parts. We fully enjoy working together and are happy it shows on the big screen. Our best to you sir! ~The Roussels
@@fullcustomIan You are very welcome. I've been watching Ian since his first shows on tv and your YT channel is exactly what I've said forever that I wish car build shows were, "fine, that's great -- now take out the false-peril of the 'upcoming auction' or whatever bullshit and give me 20 hours of video showing the build instead of 45 minutes." Ian's always been way better than most about that, but with this channel, we're on episode 41 of the VW and it is only starting to have a roof! Awesome. So interesting. I can't believe all the projects you guys juggle, but it is so engaging watching you think and work your way through them.
@@ronjenkins8529 We really appreciate that. It is true. It is a very long process and you sometimes have to let them sit for a bit to really refine them. We are happy that our channel is finally becoming more recognized for the "what it really takes" side of building, instead of caving into a timeframe that people expect at times. It seems though, once it all starts to come together it just happens so quickly! Thank you again for your generosity and kindness.
Ian most of your viewers don't have the eagle eye like you, but we're trying. Keep up the great work 👍
Nice move with the roof. That made a huge improvement for the flow of the roofline. Good show. Peace.
My wife and love watching your shows. It is really cool to watch because you are real and that is what we love. We are also dog lovers however our are tiny little doggies. They are our kids also. Keep up the good work!
I'm pretty sure it was me that mentioned. You should rib cage the top that way. It will have an nice shape from the front to the back with no interruptions. But you are the master fabrication work. I only been doing it for a couple of years now. Let's see 1983 when I started. Yeah, I know I'm old. Good day sir
Thanks for the idea!
@@fullcustomIan My friend, I learned something new every time. I watch you so no worries. Wish I could do a build with you guys out there. Shut the internet down LO. L good day sir
My husband love the show keep up the amazing work
Whomever suggested those alterations was absolutely dead on point! Looks great!
Looking good, Ian.
Thanks.
Beautiful job on that top, love it!!!
Thank you! 😊
I'll admit I was not convinced when you started this project, but you're about to make me a believer!
That truss was perfect! You know that roof would sag in the desert heat over time! It looks perfect.
On a Sunday??? We love you guys sooo freakin’ much!
Almost 13000 views and 1200 likes??? Come on people, we won’t ever have to watch Full Custom Garage and only see 25 percent of what’s going on and hopefully Ian and Jamie will make more money! I’m probably wrong, but what do I know…..
Work that clay till your happy with the shape. Gotta do what ya gotta do. Looking good Ian.
23:30 man... this is heartwarming to see lol... I thought i was the only one who had a box of random that i dump out to find nuts and bolts lol... I literally have a old sewing box (it was my grandmothers) that is FULL of randoms.
It looks so much more BADASSED now than before probably the perfect profile.
I love to watch the man Ben the metal. He is the master as far as I can see.
The roof looks so much better now👏
Excellent work on the truss spine
. It fixed the profile and will add need support in the roof.
YES. AWESOME. As soon as you slid the roof forward i was thinking "that would be a cool keychain" .
Hope you both feeling better. Love the videos.
love what Ian does great artistic mind, shows us all even the happy mistakes!
I didn’t see it at first but now it’s clear.. More pleasing to the eyeballs.
This is one of my favorite things to watch. You are amazing at creating awesome vehicles
What a transformation! It looks perfect!
You never cease but to Amaze me. Get to feeling better.
A little roll bar over each seat in thar car would not only neat but probably a life saver. Great work Sir. Thank you for sharing with us. Al
Yep that change to the roof line makes the car look correct and cooler
Like watching a mad scientist at work. Love it
Was wondering about the roof but have learned to be patient, you always work it out. Enjoy the heck out of you two ❤
Awwww thank you!
A few "Kerf" cuts in the PVC will let the fiberglass easily flex with the truss to the curve your looking for! Cool stuff love watching the process and Jamie's inputs, Stay weird and outside the box! 👽
Ian, I'm so glad you changed the roof. It was really bugging me (pun intended). I kept wondering how you were going to fix it. Wonder no more. Great work! It was fun to watch the process.
AWESOME Storm Trooper in the front, & Vader in the back👏
Roofline is much improved- well done!
You don’t see it until you see it thanks for sharing 😀👍
Absolutely Stunning work !
Thank you! Cheers!
I never get tired of watching Ian work. I've learned so much over the years and am so happy that you are giving us this real look into the process; it's so much better than the magic wand versions on the MT thing. I am really getting a better handle on the mockup process with all of the changes in direction, rework, starting over and such. To have a celebrated expert and consummate artist such as Ian reveal his "secrets", methods and thought processes is truly a wonderful and unselfish gesture. I hope you get millions of subscribers because you deserve it ...
Wow thank you! We are glad you enjoy it
An excellent adjustment by a master crafter/artist!
I think y'all did a great job on all 3 new tools
From the rear looking forward it looks like a sleezstack from land of the lost TV show when I was a kid. Love your talent . Much peace
IT WOLD LOOK AWESOME as a holding handrail
That was the most profound change to MY eye that you've done yet. Outstanding! I love your progressions!
Now it looks absolutely wicked. I love it!!!
You could save one of the hoop holes in the tressel for a hand grip to get in and out of your matchbox...ark!
I know you are determine to make that top look just right but you may want to stand back and see that beautiful roof body line. With a little cover for the engine fan shroud you could have a super strealine look.
I just dig Ian's "grin of success."
Step by step Awesomeness!! Roof looks sweeeet now dude..
The lights on that truck sure would look awesome on the Beatle 😅😂
What a great idea. Going to be stronger forsure.
Heck to the yes!!!! The new roof line rocks
Love to see you hang those heart windows in the correct orientation on something😊
That outcome was well worth the hard work way to go
Can barely wait to see this finished. Semper-Fi buddy thankyou
Hey man , watching you on TV now , and watching this video , enjoy watching both ,awesome work 👍👍😬😬😬😬😬 on tv is VW trike ,three wheelin , back in 2015
Looks freakin' awesome. Hope you're both feeling better soon 😊
Looks great. Instead of looking like an after thought, the roof line now flows quite nicely with the body of the car. Thumbs up.
Glad you like it
Hi guys, bugs looking 👀 good.
Love the top.
Big fan 4 years,keep em comin y’all!🇺🇸🤘🏽👏🏽🛻🚗👽🔧
Impressive project. I do wish you luck and will follow up. Best regards from Germany!
What a great job. Great little truss. Have a good week. Marc from Australia 🇦🇺
That made such a difference!
That Redical Bug is bad ass!!!! LOVE it !!! Greeting from Belgium! 🤟
Am I the only one who for whom the “truss” would make a great sculpture of a windshield wiper? Amazing channel just keeps getting better. Thanks Ian and Jamie.
That's a great idea!
Gettin’ there. Fun to see the progress
I see that truss being a problem hanging down from the roof. Some round tube would be adequate. Given the tube becomes shorter when bent , if its fixed securely at both ends it cant straighten , thus retaining its curve.
Awesome! Get well both of you ❤
I really luv , the shades of Tom Daniel , in this build....superkool man ,....waitin' to see'er in paint....gonna b kool
Hello Ian. I have been following you since I found your "Back From The Dead" in the $2 DVD bin at Walmart, lo, these many years past. Please don't do anything to the VW Kustom until you walk out in the sagebrush and give it that 100 yard squint. The crease in the roof behind the visor looks really good on TV. And goes with the droop of the nose and even the wake-rider tow ring in back. Epoxy bonds to clean steel and ordinary fiberglass resin really well, so you could stick the fiberglass part under the steel without losing too much of that crease. Just a little of your Bondo magick and ready to rock.
Looking pretty sweet sir.
Looks like the Hotwheels Red Baron and a Bug got it on, and this is the offspring. 👍
Nice work! When you had the fiberglass roof off and I could see the profile of the car in the background, I thought that making a roof that followed the contour of the body lines (where the roof was cut off of the original car) would be really spiffy too. It'd be sort of a convex fastback ... maybe with a power bulge for the engine and a ducktail spoiler to go with the rear fenders. But not my call - I guess I'll have to do one of my own (like that will ever happen) 🙂
Nice suggestion whomever it was. And of course, great execution by the master Ian. Would love to have one day to learn from you. But I guess I am every week.
Oh yeah, much better. You rocked it again.
Have you already thought about putting some round rod inside of your pvc spine to get the final curve you want? That could give you the clamp effect you were looking for also when you were installing the truss, Looking good as always and hope you guys feel better.
Can't wait, it's coming along great, thanks for sharing, all the best to yous and your loved ones
Happy Sunday, I know I’m late to the party. Thought maybe you would use bows to form the roof - but again I’m still watching as you work your magic. Picture a ribcage- you’ve principally got the spine or working on it .
Just a thought - loving this cars potential 👍👍
GREAT WORK!!
Hope you two start feeling better. A lot of work. It is looking better.
I also do the 'try it and see what it looks like" approach, however I also use the computer/cad try it approach. So much easier and faster (once you learned all the software tricks) to try something. And lately I am trying it using a scale model, which is kinda the best of both approaches, it is a real thing but way faster to adjust.
Thanks for sharing!
Wow it’s my favourite bug build on utube currently even tho I’ve 26 aircools
Love this episode. Make the rear windows larger.