Sir I m new electrical engineer in UAE ...love yur videos get alot of information from yur videos .. Sir show this information on LV room from transformer practically as well?
Hi sir, when would we get this trench layout from switch gear company ? Because before casting of ground floor we need this . But, DEWA approval of load schedule would take time and after dewa approval actually switchgear company submit material submittal, and in this material submittal trench layout is present .Before that casting would be done in building .
@@EngineerTaj brother,one mccb at incoming side of smdb and another mccb when this incomer reaches at mdb , right... Both of these mccb are same in all specs ? Or any difference in settings ?
@ahmadiftikhar9101 watch my other video, may be you will get the answer, the how and why cannot be explained in comment. I can make a video on it. But the concept you want to impose here it doesn’t work like that.
2x1c means two wire of one core need to be used , same 3/4 x1c means 3 or 4 wire of one core need to be used in 3 phase according to condition if neutral needed then 4 wire and if neutral not need then 3 wire of 1core
Generally for every material or equipment their is a specification and their property sheet called technical data sheet , generally it is submitted with material submittal
Your no 1 electrical engineer sir
Thanks
@@EngineerTaj Sir, Whats difference between 100mA and 30MA elcb , We can use 100MA for power circuits ??
Good information ❤😊
GOOD INFORMATION SIR, KEEP IT UP ,
❤
Mashallah ❤
Thanks
very informative sir
Good engineer 👍
Thanks
Thank you Sir..
V helpful
Alhamdulillah 👌
Sir ap drawing ke liye kon sa software use kre ho?
autocad electrical use krte ho kya ap
Sir I m new electrical engineer in UAE ...love yur videos get alot of information from yur videos ..
Sir show this information on LV room from transformer practically as well?
Ok
Thanks ❤️💐
Sir kabhi electrical autocad par vedio banayiye,
Ok
Hi, myself prabhat
Hi
My email id is in my channel about section you can email me on it
Sir ji splitter panel kya hota hai ek details video banayr please
Hi sir, when would we get this trench layout from switch gear company ?
Because before casting of ground floor we need this .
But, DEWA approval of load schedule would take time and after dewa approval actually switchgear company submit material submittal, and in this material submittal trench layout is present .Before that casting would be done in building .
Sir l v room mein jo painting Hoti Hai ground mein Uske bare me video banaaiye
Thank u sir.
Can we make trench exactly same as per the size of LV panel or do we have to give extra trench for future maintenance ? Please explain...
No, we have to increase because big cable cannot bend in small spaces of 60cm
@@EngineerTajEngr. Please share your number Iam in trouble & i need to discuss.
Assalamu alaikum taz sir
Walekum salam
Good brother,
Chequer plate is needed only over trench, right ?
Here, why it's covered the whole room ?
Yes you are right, but here as I mentioned in video, in the whole room we have trench and to cover this we need chequer plate.
@@EngineerTaj brother,one mccb at incoming side of smdb and another mccb when this incomer reaches at mdb , right... Both of these mccb are same in all specs ? Or any difference in settings ?
Specification can be different but ampere rating should be identical
Salam sir mv room ki bare mi video banaye
Walekum salam, i will try but not promise.
thank you sir
Sir, incomer outcomers ke sum ke equal nhi hoga ? How can the incomer amperes are less than outcomers amperes combined. Plz explain
Bro, electrical design calculation is not done as you are thinking. The ampere rating is based on kW rating of the equipment only.
@@EngineerTaj incoming amperes to lv panel = outgoing amperes from lv panel. Sir, is this equation not applicable to panel ? How and why ??
@ahmadiftikhar9101 watch my other video, may be you will get the answer, the how and why cannot be explained in comment. I can make a video on it. But the concept you want to impose here it doesn’t work like that.
Thank you
please video on AutoCAD Electrical in series
I will try but not promise
Sir how to become dewa approved engineer. Can you please make video with all requirements involved
Ok
Sir, mdb panel me earthing kaha se lete h
It depends genrally from earth pit
Sir can i hv dwg plz?! In pdf or in dwg format.
Sir LV room MDB ME BMS CABLE KYU AATA H PLEASE DETAILS VIDEO BANAYE
sir can you explain it
2 x 1C, 1 phase. what does 2 means and 1C in cables?
3/4 x 1C in 3 phase.?
2x1c means two wire of one core need to be used , same 3/4 x1c means 3 or 4 wire of one core need to be used in 3 phase according to condition if neutral needed then 4 wire and if neutral not need then 3 wire of 1core
@@EngineerTaj 1 x 4c what does it mean sir?
@@shafiqueahmed8627 it means 1cable of 4core, which is used for 3 phase system (3core for RYB phase +1core for neutral)
@@EngineerTaj how to select transformer for any given load. also how to select generator size.
Sir, i want to work with you.
What is Technical data sheet
Generally for every material or equipment their is a specification and their property sheet called technical data sheet , generally it is submitted with material submittal
Can u send me electrical drawings for switchgear panel. Lv panel, capacitor bank panel
Ok, you can contact me on my email, which is in my channel about section
@@EngineerTaj i have sent u the email requesting for electrical drawings.
Ok , I will reply you
Lv cable jyada bhari nahi hota hai
Sir ye sabka drawing upload kar dijiye pdf file
Sir can i have your no pls
taj@techdxb.in my contact