Arduino IDE + ESP32 + P5 RGB LED Panel | Getting Started & Digital Clock with ESP32 and P5 using NTP

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ก.ย. 2024

ความคิดเห็น • 22

  • @ricardomontero5839
    @ricardomontero5839 22 วันที่ผ่านมา

    Hello I really liked this watch; I live in Costa Rica, I have not been able to adjust the time, how could I make this adjustment, Thank you.

  • @yedukondalumidde1900
    @yedukondalumidde1900 2 หลายเดือนก่อน

    Super 🎉🎉

    • @utehstr
      @utehstr  2 หลายเดือนก่อน

      Thank You 🙂

  • @yeremiasiregar642
    @yeremiasiregar642 ปีที่แล้ว

    thankyouu.. runs perfectly. I want to ask, how to make the numbers on the clock bigger?, and the day of the day smaller

    • @utehstr
      @utehstr  ปีที่แล้ว

      Set on this line of code :
      dma_display->setTextSize(1);

  • @ricardomontero5839
    @ricardomontero5839 3 หลายเดือนก่อน

    Hello, I am from Costa Rica, very good project, I have not been able to adjust the local time; how can I do this ? Thank you.

  • @aimansafwan9224
    @aimansafwan9224 ปีที่แล้ว

    thank you for the guide!
    one question is it possible to make and display animated pixel/bitmap image into led panel using esp32? if so please make a video about it 😁😁

  • @mdhasanuzzaman4039
    @mdhasanuzzaman4039 6 หลายเดือนก่อน

    Hi,
    RGB LED Panel Can be used as a secondary display of computer?

  • @paisitn914
    @paisitn914 ปีที่แล้ว

    thank you very much. how to include font.h and use it?

  • @yogeshitaliya473
    @yogeshitaliya473 ปีที่แล้ว

    ❤❤❤

    • @utehstr
      @utehstr  ปีที่แล้ว +1

      👍🙂

  • @mohammadjafare4957
    @mohammadjafare4957 8 หลายเดือนก่อน

    ❤❤❤ok

  • @OrszágTükör_2024
    @OrszágTükör_2024 8 หลายเดือนก่อน

    As far as I know most RGB matrixes need 5V logic level while ESp32's have only 3.3V. Are you using logic level shifter as well?

    • @utehstr
      @utehstr  8 หลายเดือนก่อน

      This project does not use a "logic level shifter". You can download and see the installation image that I have shared in the description of this video.

    • @RuaLez31
      @RuaLez31 หลายเดือนก่อน

      @@utehstr there is no power supply connected to your ESP32 in your installation image (video and png). Is that a mistake or is there a power pin on the connector?

  • @phathuynguyen3674
    @phathuynguyen3674 ปีที่แล้ว

    I use ESP32 (38 pins) different from your ESP32 (30 pins). How are the pins of ESP32 (38 pins) connected to led P5?

    • @utehstr
      @utehstr  ปีที่แล้ว

      Use the same PIN number that I used.

  • @sidsingh5446
    @sidsingh5446 3 หลายเดือนก่อน

    Sir why everyone makes it with p5 rgb display using esp32. Can we control the p10 rgb display using esp32. Please make one video with p10 rgb display using esp32 sir. I have searched a lot but not got any video with esp32 p10 rgb display... Please sir

    • @utehstr
      @utehstr  3 หลายเดือนก่อน +1

      I've tried using a p10 rgb panel (HUB75, scan 1/8) with esp32, but I'm getting some problems and I haven't found a solution. Later I will try again using a p10 rgb panel (HUB75, scan 1/4), if the results are good, I will make a video about it.

  • @Mcquade0815
    @Mcquade0815 ปีที่แล้ว

    #include How ? is Missing.....

  • @mohammadjafare4957
    @mohammadjafare4957 ปีที่แล้ว

    Ok

  • @Rêvetavieencouleur-i2c
    @Rêvetavieencouleur-i2c ปีที่แล้ว

    is it possible to do crypto asset tracker ??