I love it thanks was thinking of getting one cause I’ve been using 27.5 ozark trail mtn bike from Walmart and was wondering if my rims and front fork would work on that kind of frame Awsome build great work
@@ebperformance8436 Thanks! I'm waiting on a 200mm dnm shock if something I will swap it to a 165mm. By the way I saw your review on amazon about the frame lol.
@@ArthursStudio yeah…Amazon is a bit more expensive, but I got it….because it was quickly delivered. And I was pissed the 3000w kit didn’t fit my regular MTB..But the frame was designed with a nice dropout and torc straps. I believe there are 2 versions of this fame….if you ever want to save weight…you look at one of my other videos…..they are long but I went with lighter side panels….the total weight without the battery is 82 pounds….battery I’m still waiting on. 20pounds so the entire bike should weight a total of 102pounds.
Finally got a chance to drive it….top speed = too damn fast’ it goes over 60MPH, and quick’ the 27.5 inch rims is probably making this possible….I got the original 80A Savoton speed controller, and a 72v battery with 21ah and 80amp BMS. Make sure you do the hall sensor test, and you’re motor is set on 1 after you’re hall test….AND BECARFUL! The front end will lift off the ground a bit….I’m so glad this didn’t go on my normal MTB….the torc would bend a normal MTB dropout like a pretzel. The hydraulic cable mounted brakes are barely enough to stop this thing…..I’m 144 pounds so if you’re lighter be extra careful.
Hey I'm doing the same build in the Netherlands! Is a 200mm shock good for me if I put the saddle al the way down or use the moto style seat? I've 27,5 wheels and I'm 185cm
the unlocked sabvotons dont usually come with the 750c lcd or the ukc1 lcd as the unlocking stops supprt for the lcd protocol thats what was told by a sabvoton manufacturer
Hi mate, Great vid !! What power motor are you running on the back ? What size dropout is your frame & what size drop out is your hub motor ? I’m thinking of building one but want to get the measurements correct.
The dropout is 170mm for the bike, and 150mm for the wheel’ if you’re putting one on any bike, the dropout spacing has to be 150mm or more….That’s for the kit I purchased.150mm is about 6 inches wide. My motor is 3000 watts. Many regular bikes will require a kit with a 135mm drop out…any bigger, will require having to bend the regular bikes dropout to fit….I wouldn’t advise doing it.
I will try to do a video on its speed….but I’m definitely gonna need a go pro….top speed was over 100KPH until I sat it on mph it hits 64mph, and fast? a 3000w 3t motor is more than enough.
I like it. it looks different but has its own charm. Nice build
Nice ebike build! I like what you did with the side panel. Would you happen to have the link for that orange color? I a fan of orange as well.
I love it thanks was thinking of getting one cause I’ve been using 27.5 ozark trail mtn bike from Walmart and was wondering if my rims and front fork would work on that kind of frame Awsome build great work
Awesome! I bought the same frame and now i’m a bit worried since I plan on putting 26x4 wheels and it might be too tall for me. I’m 5”4.
You should be fine….if you’re using the normal bike seat you can get a 150mm to a 166mm back shock.
A 200mm is going to sit pretty tall.
@@ebperformance8436 Thanks! I'm waiting on a 200mm dnm shock if something I will swap it to a 165mm. By the way I saw your review on amazon about the frame lol.
@@ArthursStudio yeah…Amazon is a bit more expensive, but I got it….because it was quickly delivered.
And I was pissed the 3000w kit didn’t fit my regular MTB..But the frame was designed with a nice dropout and torc straps.
I believe there are 2 versions of this fame….if you ever want to save weight…you look at one of my other videos…..they are long but I went with lighter side panels….the total weight without the battery is 82 pounds….battery I’m still waiting on.
20pounds so the entire bike should weight a total of 102pounds.
@@ebperformance8436 👍
Finally got a chance to drive it….top speed = too damn fast’ it goes over 60MPH, and quick’ the 27.5 inch rims is probably making this possible….I got the original 80A Savoton speed controller, and a 72v battery with 21ah and 80amp BMS.
Make sure you do the hall sensor test, and you’re motor is set on 1 after you’re hall test….AND BECARFUL! The front end will lift off the ground a bit….I’m so glad this didn’t go on my normal MTB….the torc would bend a normal MTB dropout like a pretzel.
The hydraulic cable mounted brakes are barely enough to stop this thing…..I’m 144 pounds so if you’re lighter be extra careful.
Hey I'm doing the same build in the Netherlands! Is a 200mm shock good for me if I put the saddle al the way down or use the moto style seat? I've 27,5 wheels and I'm 185cm
nice bike, I actually seen you posted the picture on a review on amazon...
Tron... Makes sense 🤓☝️🤟👽🚲
the unlocked sabvotons dont usually come with the 750c lcd or the ukc1 lcd as the unlocking stops supprt for the lcd protocol thats what was told by a sabvoton manufacturer
And they cant be unlocked at home diy unfortunatly ive been reading forums for years of people trying to get in
ive got svmc 7245 sabvoton its a 45 amp unlocked version its a mini size cranked up to 150 amp and its ok ,can run little hot if push to hard though
check out endless sphere forum ,they have the biggest custom ebike membership and they cover pretty much everything
Hi mate,
Great vid !!
What power motor are you running on the back ?
What size dropout is your frame & what size drop out is your hub motor ?
I’m thinking of building one but want to get the measurements correct.
The dropout is 170mm for the bike, and 150mm for the wheel’ if you’re putting one on any bike, the dropout spacing has to be 150mm or more….That’s for the kit I purchased.150mm is about 6 inches wide.
My motor is 3000 watts.
Many regular bikes will require a kit with a 135mm drop out…any bigger, will require having to bend the regular bikes dropout to fit….I wouldn’t advise doing it.
I will try to do a video on its speed….but I’m definitely gonna need a go pro….top speed was over 100KPH until I sat it on mph it hits 64mph, and fast? a 3000w 3t motor is more than enough.
How did you get the motor on am using a csc 1500w motor and it won't fit the drop out ???
The stealth bomber frame can fit two different size drop outs…..the hard ware has two different slide outs.
can you link the motor kit? thanks
Do you have a link for that frame?
Just the stealth bomber frame. There's a few "premium" frame options I've seen for a few bucks more