How to apply Tru-Oil Finish to a guitar
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- In this series of videos I show my process and tips on how to effectively apply a Tru-Oil finish to a guitar body and neck. Follow along to learn more and see the finished result at the end of the series. Thank you so much for following along! Enjoy.
For more information about Soleil Guitars please visit soleilguitars.com.
Products used in this series;
Birchwood & Casey Tru-Oil (www.amazon.com...)
3M Super Fine Synthetic Steel Wool (www.amazon.com...)
Cotton T-shirt material (www.amazon.com...)
Tack Cloth (www.amazon.com...)
That’s a beauty of a guitar man. Great work. Thank you for the information. Right now I’m 3 coats in on my first build. Your tips are much appreciated.
Thanks! Good luck to you!
Gorgeous colors!
Thanks!
Thanks for posting this bro. I'm about to do this to a Warmoth body, and need as much confidence building as I can get!
You mentioned you don't do grain filling... are you getting this thing real glossy on the end result without it? Ever try the slurry method (sanding a layer or two of finish in to make it slurry up and self fill all the grain)?
I don't grain fill Maple because of the dense grain structure, just make sure to raise the grain several times with water and sand afterwards to avoid grain raise later on. I sand to 600 grit before applying any finish. As far as other more porous woods I would suggest grain filling. I didn't on this build because I wasn't going for a perfectly flat finish. As far as the slurry method goes I have never tried it so I don't have an opinion.
hi looks beautiful. wondering what you did to get to the point where this video started?
Sanded the body to 400 grit. Then I grain filled the body all the way up until it meets the top. I then apply sanding sealer to the area in the body where it meets the top to prevent dye bleed through. I hope that helps.
Good work. How do You avoid lints ? I used t-shirt, too but lot of lints also went with true oil and now I need to sand it but it's really hard do do it to not touch the paint, I also painted same way but with Rit Dye. Greetings from Poland.
I didn't really have much of a lint problem. Preparing the wood surface to be flat with no pronounced grain is key. I just pick out any lint I find with a toothpick. You can also use sanding sealer before applying the oil but I haven't tried it yet.
@@SoleilCustomGuitarsThank You
Looks awesome! How hard does it get after fully curing?
It's a very durable finish. Not as durable as a 2k poly of course but it's also easy to repair.
@@SoleilCustomGuitars Awesome, thank you for the reply! I have a project with about 12 coats curing now for about 3 weeks and am just paranoid to assemble it haha.
Pretty nice.
Thank you