You don't know how helpful this video is. I bought this filter yesterday and haven't set it up, because I was too confused. I need to transfer the mídia from my awful Space Eko Pro to this filter. Seriously, you helped a lot. I'll be setting up the filter while watching this tutorial. Thank you and best regards from Portugal!
I have been using the 303B and 304B. They are in my experience quite a reliable filters. Currently B both are still running, 303B 4 yrs and 304 going 3 yrs. Just a tip to prolong it's use: always do regular maintenance (i do once a month or every 2 months), do not put too much filter foam and medias and lastly make sure you clean the propeller and attached it properly. I have beeng using the UV light ( intermittent on and off) for longer than a week and i don't have any problems with it infact it does help achieve crystal clear water. Nice vid very detailed!
Thank you for the feedback and advice! I have been doing cleaning every 2-2.5 months so far. UV light i haven’t touched it. It’s been fine as is without the UV light, crystal clear water even with heavy waste makers like Tilapias lol. I might be removing the canister filter for now since I am almost done with the Tilapias. Going for smaller fish this time with low maintenance.
Just picked up the Marine Color 370 w/UV 9w.... haven't set it up as of yet because I'm waiting for the silicone hose that'll replace the green that came with the filter. I.o the SunSun and marine color are All basically the same filter But hey, who's watching?? Apparently by switching out the original green hose with an aftermarket silicone tubing type hose, there's a way better out (and in) come with the filter. Im just a bit leery of using the supplied hose clamps... I think I'll switch them out for a few good grade tie straps as metal hose clamps could possibly crack or break the ridgid plastic tubes inserts of both the intake and return lines.
I heard the same about switching the green tubes. I am waiting till it gets dirtier then i might switch them out haha. I hope your new filter is running well!
can confirm this is the exact same filter as the SunSun 304B I bought off amazon here in Ontario 2 years ago. I might have to get a second one because they are such a great bang for your buck. The one I have is currently one of two filters I have on my 75g tilapia tank, so good choice!
Thanks for posting this video! I just bought this filter for my small outdoor pond. I estimate it’s about 200-250 gallons. So hopefully this filter does the trick! THANKS!!! ✌🏾
Hey, hopefully the video helps you with the setup. If you have any questions, let me know I’ll try my best to answer it. Good luck with your new filter!
@@MTFISHER Thanks you’re awesome! Would you happen to know of any way I can control the inlet/outlet flow? Any accessories or attachments? The filter seems to be almost too strong for my pond but there’s no way to control the flow
@Fotosynthesis858 So i haven’t personally tried it on my setup but there are flow control valves you can buy online. You will just need to make sure its the right size for the specific canister filter.
I'm actually planning to live in Canada for a few months this July, so at least I know more about how to make my stay more comfortable than I did before!
Thank you appreciate the feedback. You can try on Amazon, verify their return/exchange policy on the product first and return it if it doesn’t meet your needs!
Placing tip of hose in hot water for a couple minutes will soften hose and allow you to really get the hose on the fitting perfectly, when it cools it will shrink back to size making a very tight seal . Only issue with this is you pretty much have to cut the hose to get it off.
Can you explain how long to use the uv light?😅 Some review the uv light ended up melting it's surrounding including basket or anything that came in contact with it.
@@MTFISHER I was planning on buying a cannister filter. It came with a uv light function. I'll use it on my goldfish tank. It kind a scary when some said it can melt the surrounding because of prolonged use. Maybe several hour per week is fine but can't turn it on 24/7 etc. I got top filter, sponge filter & hob now. Just recently thought about buying cannister filter.😆
@ling1255 I use it for my tilapias, and they get fed a lot and its been doing great without any UV light. Its up to u, u can try to experiment with it but always remember the risk behind it. I would try seeing the water quality with and without using the UV light to see if it makes any difference for you..
Hey man, a few things to consider: 1) First would need to know your tank size in gallons. 2) Knowing your fish. How many fish do you have and how much waste do you think they produce? Low/Medium/High. (example my tilapias were fed twice a day and they would produce a lot of waste) 3) Whats your budget? 4) Not sure what products are available in India and what stores sell canister filters.
Pro Tip... put a big sponge on the intake... it filters out the big stuff before it clogs your canister and more surface area for good bacteria to grow!!!
I just got my new sunsun canister filter and its oily creamy inside on the top edges and on the top black part... is this normal??? Should I return it??? :/
I haven’t personally tested the 404b, but seems like the differences are more cosmetic/visual. Might be slightly taller but they are both pushing 525gph
You can if you think your fish tank requires the extra filtration/water flow. Most people would switch to a proper size canister filter that fits their tank and only use that. But the options are there and it’s on you and what you think is the best fit for your tank!
@@MTFISHERokay, I’ll plan on getting a 206 or 207 for my 40 gallon then. I have a sorta small sponge filter I might as well leave in right? Do I need to order any more mesh besides rings and bio balls? Or does it come with it? I’m looking at the fluval 207 performance. Sorry for all the questions
Is your tank heavily stocked? A lot of waste? Do you have plants? A lot of things come in factor when choosing the right filter. With canister filters, companies will market it a certain way to grab peoples attention, for instance the fluval 207 says it filters 206 gallons of water per hour, but they usually test this without any filter media. With filter media + fish waste + food debris, the flow rate will decrease a lot. One thing people do is cut the flow rate in half (206/2 =103) since in the real world you will have filter media lol and see if your aquarium would get filtered 4-6 times an hour. Are you able to bump up to the 307? Also I was looking at the filter on amazon canada, and yes they do come with an initial setup of filter media.
@@MTFISHER alright. Yes I might be able to just more expensive and what not, I mean I’m trying to have a floor of pearlweed is slowly coming In. Around 4 bleeding heart tetras and 3 bunoes Aries testers and 2 other smaller ones.
@Zywev.rl13 Some may disagree with me but to be safe i would just go with the 307. You can keep your sponge filter if you want but if the canister filter doesn’t come with enough biological filter media, you should add more.
You can buy from your local pet store or amazon. You don’t need to search specific for this filter, you can mix and match to see what works for your setup.
The ceramic rings will help break solid waste before it hits the sponge. Its to help prevent frequent clogging. I have been running for close to 2 months now without any issues.
@user-so2bu3cm3r I would first start by separating the parts. Identify which one is your inlet pipe, the outlet pipe and the in/out attachment that goes on your canister filter.
I would turn off the UV, i don’t use it and most people I have spoken to don’t either. You also have the possibility of the bulb over heating from what I heard (speculation)
The general rule is you want a canister filter to have enough GPH to turnover the volume of your tank about 4 times per hour. So in your case 225 x 4, so something that has 900 GPH.
Ain't gonna lie that IS a ton of big @$$ fish for a tank that size what is that a 55 or 75 gl tank?! But I'm glad you got them a heavy duty filter cuz I actually have this same filter I bought about a month ago & it is an incredible filter & I've been a fish owner for over a decade so I've had dozens of different HOB filters & canister filters over the years & this 200Gl filter is by far the most impressive of any brand I have owned. If I'm being honest though I actually came to your video in hopes I could figure out the UV light. It just doesn't say really anything about it in the instructions other than that I believe that it said a small light on the outside on the switch or near it would illuminate when the UV light is on. Mine does not have any light that illuminates & I can't figure out how to gain access to the UV light switch on the outside of the filter. It has a clear plastic cover over it & I assumed that I could just twist it off to gain access but I tried pretty dang hard & it wasn't moving at all & I didn't want to break it so I was hoping I could find a video showing how others gain access to that switch but yours unfortunately doesn't. If you happen to read this or if anyone else who has this filter reads this & knows how to access that switch please enlighten me as I really like this filter so I don't want to break it at all trying to get to that switch. Thanks
I bought a sunsun 3000 from "finest-filters". It failed in service after only 8 months, ruining the cabinet and ceiling below andI'mstrugglingtogetarefund.. I will never touch one of their products again.
Sunsun primary sealing o-ring relies on the clamps pulling the o-ring down into the tapered main body. IMHO,but wilth considerable experience as an engineer, this is far less effective than an o-ring being compressed against a flat surface. ❤ If the plastic used to mould the main body is too pliable, it yields to the outward pressure of the o-ring and reduces the sealing pressure thus water gets past it. This problem is not unknown .. more than one TH-cam post suggests wrapping ptfe tape inside the anular oring groove. Basically, this is intended to restore the original sealing pressure .... but highlights the flaw design and materials.
@petenewell5377 I haven’t had any issues with my canister filter so far. I did add a few extra things to prevent/slowdown a leak. I put the canister in a large tote and have the canister filter attached to a smart plug that can be controlled from my phone. That way, I can stop the filter right away if I see water spilling. Been planning to add a water sensor in the tote, so i can be alerted if water does start spilling in the tote, didn’t get to it yet lol.
You don't know how helpful this video is. I bought this filter yesterday and haven't set it up, because I was too confused. I need to transfer the mídia from my awful Space Eko Pro to this filter. Seriously, you helped a lot. I'll be setting up the filter while watching this tutorial. Thank you and best regards from Portugal!
Thank you for leaving a comment, very happy to hear that this helped you! Good luck with ur new canister filter 🥂
You the man! The instructions included were AWFUL, but you helped me get it up and running
I am glad to hear it helped you out! Lol yeah the instructions were pretty bad!
I have been using the 303B and 304B. They are in my experience quite a reliable filters. Currently B
both are still running, 303B 4 yrs and 304 going 3 yrs. Just a tip to prolong it's use: always do regular maintenance (i do once a month or every 2 months), do not put too much filter foam and medias and lastly make sure you clean the propeller and attached it properly. I have beeng using the UV light ( intermittent on and off) for longer than a week and i don't have any problems with it infact it does help achieve crystal clear water. Nice vid very detailed!
Thank you for the feedback and advice!
I have been doing cleaning every 2-2.5 months so far. UV light i haven’t touched it. It’s been fine as is without the UV light, crystal clear water even with heavy waste makers like Tilapias lol.
I might be removing the canister filter for now since I am almost done with the Tilapias. Going for smaller fish this time with low maintenance.
Just picked up the Marine Color 370 w/UV 9w.... haven't set it up as of yet because I'm waiting for the silicone hose that'll replace the green that came with the filter. I.o the SunSun and marine color are All basically the same filter
But hey, who's watching??
Apparently by switching out the original green hose with an aftermarket silicone tubing type hose, there's a way better out (and in) come with the filter. Im just a bit leery of using the supplied hose clamps... I think I'll switch them out for a few good grade tie straps as metal hose clamps could possibly crack or break the ridgid plastic tubes inserts of both the intake and return lines.
I heard the same about switching the green tubes. I am waiting till it gets dirtier then i might switch them out haha.
I hope your new filter is running well!
can confirm this is the exact same filter as the SunSun 304B I bought off amazon here in Ontario 2 years ago. I might have to get a second one because they are such a great bang for your buck. The one I have is currently one of two filters I have on my 75g tilapia tank, so good choice!
Yeah did a bit of research and it is the exact same filter lol.
Did you start breeding your tilapias yet?
Thanks for posting this video! I just bought this filter for my small outdoor pond. I estimate it’s about 200-250 gallons. So hopefully this filter does the trick! THANKS!!! ✌🏾
Hey, hopefully the video helps you with the setup. If you have any questions, let me know I’ll try my best to answer it. Good luck with your new filter!
@@MTFISHER Thanks you’re awesome! Would you happen to know of any way I can control the inlet/outlet flow? Any accessories or attachments? The filter seems to be almost too strong for my pond but there’s no way to control the flow
@Fotosynthesis858 So i haven’t personally tried it on my setup but there are flow control valves you can buy online. You will just need to make sure its the right size for the specific canister filter.
Very good step-by-step process to follow. Thanks, boss!
Thank you very much!
I'm actually planning to live in Canada for a few months this July, so at least I know more about how to make my stay more comfortable than I did before!
All the different layers seem pretty great
Really helps with the filtration!
Great video! I was trying to decide if i should try a sun sun and after seeing this video i think i will.
Thank you appreciate the feedback. You can try on Amazon, verify their return/exchange policy on the product first and return it if it doesn’t meet your needs!
Placing tip of hose in hot water for a couple minutes will soften hose and allow you to really get the hose on the fitting perfectly, when it cools it will shrink back to size making a very tight seal . Only issue with this is you pretty much have to cut the hose to get it off.
Can you explain how long to use the uv light?😅 Some review the uv light ended up melting it's surrounding including basket or anything that came in contact with it.
I actually don’t use the UV light because of the reviews haha. I honestly don’t think you need it. What kind of fish are you keeping?
@@MTFISHER I was planning on buying a cannister filter. It came with a uv light function. I'll use it on my goldfish tank. It kind a scary when some said it can melt the surrounding because of prolonged use. Maybe several hour per week is fine but can't turn it on 24/7 etc. I got top filter, sponge filter & hob now. Just recently thought about buying cannister filter.😆
@ling1255 I use it for my tilapias, and they get fed a lot and its been doing great without any UV light. Its up to u, u can try to experiment with it but always remember the risk behind it.
I would try seeing the water quality with and without using the UV light to see if it makes any difference for you..
Tnx bro, I just got this and your video was really helpfull.
anytime! I am glad it helped you out. 🙌
Fabulous video man! You deserve many more likes!!
Thank you 🙏 really appreciate it!
Bro which is the best canister filter for a 6feet aquarium?
Love from india ❤
Hey man,
a few things to consider:
1) First would need to know your tank size in gallons.
2) Knowing your fish. How many fish do you have and how much waste do you think they produce? Low/Medium/High. (example my tilapias were fed twice a day and they would produce a lot of waste)
3) Whats your budget?
4) Not sure what products are available in India and what stores sell canister filters.
@@MTFISHER is sunsun Hw 304B is enough for 6 feet tank?
@jyotiprakash7127 whats the total gallons? 6 feet doesn’t tell me how much water the tank holds.
It holds 170 gallons water
Pro Tip... put a big sponge on the intake... it filters out the big stuff before it clogs your canister and more surface area for good bacteria to grow!!!
I moved away from the canister filters for now, but the tip will definitely help someone else reading the comments! Appreciate it mate!
I just got my new sunsun canister filter and its oily creamy inside on the top edges and on the top black part... is this normal??? Should I return it??? :/
When u say oily, is it like a lubricant? Also where did you buy it from?
How does this unit compare to the 404b? Just a slightly bigger canister?
I haven’t personally tested the 404b, but seems like the differences are more cosmetic/visual. Might be slightly taller but they are both pushing 525gph
Do you still need a hang on the back filter when having the canister filter?
You can if you think your fish tank requires the extra filtration/water flow. Most people would switch to a proper size canister filter that fits their tank and only use that. But the options are there and it’s on you and what you think is the best fit for your tank!
@@MTFISHERokay, I’ll plan on getting a 206 or 207 for my 40 gallon then. I have a sorta small sponge filter I might as well leave in right? Do I need to order any more mesh besides rings and bio balls? Or does it come with it? I’m looking at the fluval 207 performance. Sorry for all the questions
Is your tank heavily stocked? A lot of waste? Do you have plants? A lot of things come in factor when choosing the right filter.
With canister filters, companies will market it a certain way to grab peoples attention, for instance the fluval 207 says it filters 206 gallons of water per hour, but they usually test this without any filter media. With filter media + fish waste + food debris, the flow rate will decrease a lot.
One thing people do is cut the flow rate in half (206/2 =103) since in the real world you will have filter media lol and see if your aquarium would get filtered 4-6 times an hour.
Are you able to bump up to the 307?
Also I was looking at the filter on amazon canada, and yes they do come with an initial setup of filter media.
@@MTFISHER alright. Yes I might be able to just more expensive and what not, I mean I’m trying to have a floor of pearlweed is slowly coming In. Around 4 bleeding heart tetras and 3 bunoes Aries testers and 2 other smaller ones.
@Zywev.rl13 Some may disagree with me but to be safe i would just go with the 307. You can keep your sponge filter if you want but if the canister filter doesn’t come with enough biological filter media, you should add more.
just started getting my aquarium set up great stuff!
Sweet, what kind of fish you keeping?
Isnt that tank really small for size and amount of those fish?
Fish have been reduced, I’m down to 1 tilapia now, been trying to put out a new video, updated video will posted soon.
Good video 👍 the fish need a bigger tank, longer. 6 foot
Thank you, i separated the fish, they are happier now lol
How tall is this tank?
Where do you buy replacement media for this
You can buy from your local pet store or amazon. You don’t need to search specific for this filter, you can mix and match to see what works for your setup.
where can I get parts for this filter? my quick disconnect won't lock down (I think the tabs on the head pipes are broken off)
Did you buy it from Amazon?
@@MTFISHER No I got it with an aquarium I bought on FB Marketplace.
@c3ajeff I just checked amazon canada and they sell spare parts for the canister filter.
Aliexpress has them too,
if you are okay with waiting for the longer delivery time!
@@MTFISHER Yes, true but I'm looking for parts to repair mine. I don't see where I can get parts or just the head unit.
Awesome video! Explained well!
Thank you very much!
great informative video.
please keep making them 👍
Really appreciate it, thank you!
Why you put ceramic ring on bottom, im new sorry for questions
The ceramic rings will help break solid waste before it hits the sponge. Its to help prevent frequent clogging. I have been running for close to 2 months now without any issues.
@@MTFISHER thank you for the answer, i will try this, thank you for sharing your method and experience, more power and God bless 😊😊😊 thank you
Glad to help. Hope it works out for you!
Solid information
Hope it helped! 🙏
get a hair drier or put the green hose in hot water to soften it up and it will slide right over the plastic.
It’s getting time to replace the tubes lol
I will use your advice when i replace them, thanks!
Hey bro, I’m honestly lost on the tubing part can you help me? I’m
Not sure how to set the tubing up
Where exactly are you stuck?
Did you install any of the tubing yet?
@@MTFISHER It’s how to set the tubing up correctly, also the skimmer, I’ll be home in about an hour. I’ll reply again.
@user-so2bu3cm3r I would first start by separating the parts. Identify which one is your inlet pipe, the outlet pipe and the in/out attachment that goes on your canister filter.
Hi sir do you have an email I can send you pictures?
@@MTFISHER hi sir do you have an email? I can send you pictures?
I built an upper filter house that is the easiest to clean - ===== The closed filter like in the video I had takes a lot of time and trouble to clean
by upper filter do you mean a hand on back filter? or one that sits inside the tank?
Hey I felt shock in water when I turn on the UV light.. any solution for this??
I would turn off the UV, i don’t use it and most people I have spoken to don’t either. You also have the possibility of the bulb over heating from what I heard (speculation)
Sir which canister filter is good for 8*2*2 tank aquarium
how many gallons is that aquarium?
@@MTFISHER about 225 gallon or 900 litres water
The general rule is you want a canister filter to have enough GPH to turnover the volume of your tank about 4 times per hour. So in your case 225 x 4, so something that has 900 GPH.
@@MTFISHER which model number is best if anyone in market
I would use 2 Sunsun HW-3000 canister filters specially if theirs a lot of fish in it
Ain't gonna lie that IS a ton of big @$$ fish for a tank that size what is that a 55 or 75 gl tank?! But I'm glad you got them a heavy duty filter cuz I actually have this same filter I bought about a month ago & it is an incredible filter & I've been a fish owner for over a decade so I've had dozens of different HOB filters & canister filters over the years & this 200Gl filter is by far the most impressive of any brand I have owned. If I'm being honest though I actually came to your video in hopes I could figure out the UV light. It just doesn't say really anything about it in the instructions other than that I believe that it said a small light on the outside on the switch or near it would illuminate when the UV light is on. Mine does not have any light that illuminates & I can't figure out how to gain access to the UV light switch on the outside of the filter. It has a clear plastic cover over it & I assumed that I could just twist it off to gain access but I tried pretty dang hard & it wasn't moving at all & I didn't want to break it so I was hoping I could find a video showing how others gain access to that switch but yours unfortunately doesn't. If you happen to read this or if anyone else who has this filter reads this & knows how to access that switch please enlighten me as I really like this filter so I don't want to break it at all trying to get to that switch. Thanks
Why all the air bubbles coming out of the filter?
Which part of the video are you talking about?
Great video!
Thank you
tengah next! 😂
Tank size
the one in the video is 30 gallon, but i have now installed in a 38 gallon tank
Am I the only one that gets excited when setting up a new canister filter ? Sorry my man need a bigger tank
lol its definitely fun to set it up, and those fish are long gone. Eaten and digested!
I bought a sunsun 3000 from "finest-filters". It failed in service after only 8 months, ruining the cabinet and ceiling below andI'mstrugglingtogetarefund.. I will never touch one of their products again.
How did it exactly fail?
Sunsun primary sealing o-ring relies on the clamps pulling the o-ring down into the tapered main body. IMHO,but wilth considerable experience as an engineer, this is far less effective than an o-ring being compressed against a flat surface. ❤ If the plastic used to mould the main body is too pliable, it yields to the outward pressure of the o-ring and reduces the sealing pressure thus water gets past it. This problem is not unknown .. more than one TH-cam post suggests wrapping ptfe tape inside the anular oring groove. Basically, this is intended to restore the original sealing pressure .... but highlights the flaw design and materials.
@petenewell5377 I haven’t had any issues with my canister filter so far. I did add a few extra things to prevent/slowdown a leak. I put the canister in a large tote and have the canister filter attached to a smart plug that can be controlled from my phone. That way, I can stop the filter right away if I see water spilling. Been planning to add a water sensor in the tote, so i can be alerted if water does start spilling in the tote, didn’t get to it yet lol.
way too many fish for that tank...crowded af...poor fish
lol that has been taken care of a while ago, will post an updated video of my current tank setup soon!
@@MTFISHER thank you❤
😊
Still dirty yellow water.. lol.