Goolrc 3650 4300Kv 60Amp Brushless Combo

Had a little time for some fun with the Carisma Audi M40s using a GoldBat 3s 35c discharge and a Goolrc 3650 combo.
GoldBat 11.1v 3s 35c
www.amazon.com/GOLDBAT-2200mA...
Speed Meter
www.amazon.com/gp/product/B08...
Brushless combo
www.amazon.com/GoolRC-Brushle...
Servo used
www.amazon.com/gp/product/B07...

[@RCROVA]

good car!!

[@davidrcbasher4412]

Thanks' man, I had to put a little work into her to get her where she is.

[@geneside0]

Awesome video buddy, i got the same setup on my buggy, heaps better than stock all day long. Bigger spur gear will pump some extra zip in it.

[@VikingDudee]

Yeah my Stampede 4x4 VXL when I bought it used, It had the 15 tooth pinion on it, and 3s lipo it'd reach 70mph. I ended up gearing it down to 11/54 and installed a 1/8th scale 2650kv motor. Top speed is around 30 - 35mph, but for a monster truck, I'll take it. I don't need stupid fast with it. Though thinking of setting up 2wd slash for speed. It has the Castel 3800kv motor, but no ESC, Think I can rig up my old VXL ESC for it and mess around.

[@davidrcbasher4412]

Nice, that Vxl system would definitely get it rolling for you.

[@garagebuilds]

awesomee m8! i am waiting on my little china combo also for my Rustler and see how it does on 3s , you should lower steering rate on transmitter so it can steer less it will help you go straight more and not into the grass Nice vid!

[@davidrcbasher4412]

That’s cool. Check out the later vids she’s an arrow at 60+

[@kukomelaza8237]

used program card ?

[@davidrcbasher4412]

Yes I programmed the Esc.

[@dustinplee5067]

I really really need help my goolrc brushless motor and esc come in the mail today and it’s turns on but my Receiver will not turn on

[@davidrcbasher4412]

be sure the hot and grounds are aligned, If they are connected correctly may need to look at getting a new receiver.

[@dustinplee5067]

@@davidrcbasher4412 I figured it out the ESC was not connected the Right Way, on the Receiver I called a rc shop and they told me what way to put it thank you for your help

[@dustinplee5067]

@@davidrcbasher4412 Brushless motor is beeping and flashing red on the receiver what do I do how can I fix it it a goolrc I tried watching videos never found one that works for me on a video

[@davidrcbasher4412]

@@dustinplee5067 Goolrc only beep when there is not signal from the transmitter to the receiver, did you Bind the rx/tx?

[@dustinplee5067]

@@davidrcbasher4412 It won’t let me bind the transmitter and receiver and the receiver quit blinking red but it’s still beeping

[@tedhobby]

Seems faster than 39. Ever try with other GPS?

[@davidrcbasher4412]

Only other device I’ve tried was a phone app which was fairly off. Later I geared up to hit 53 mph on this system.

[@tedhobby]

@@davidrcbasher4412 53mph more make sense for that rc 😁

[@picklerickdic8955]

dude thats sad, 39 mph sucks balls dad you use a 3s lipo at any point in any of those runs or did you use a 7.4 lipo?? That still sucks even if you were using a 7.4v lipo, it should have done at least 60mph, that was really slow for full trigger!!

[@davidrcbasher4412]

Then you should see the upto date vid. Lol👍

[@johan-henrik]

You are not able to control the car in That speed. Why is the top speed so important? I think it is very childy to put a GPS on the car for testing the topspeed.
Dont you understand That you make a fool of yourself?

[@davidrcbasher4412]

You are able to and RC thin speeds as long as your aerodynamics aright and your inputs are small and very very calculated I've just been handling these things since I was a child and it's gotten easier over the years. 🤛🏻✌🏻

[@InfinityUSEA]

let bro enjoy the car man quit bein a hater, it his car. its RC shit happens