Great job, I have an 06 Elise. In winter project now on mine. Adding the BOE 300 SC. Also adding a LSD to the transaxle. Challenging car to work on but rewarding results.
Hello, i trust that you are on lotustalk forum board? I don't know much around the Chicago area unfortunately. The boe kits look great and would be what i do if I was NA i understand the new S/C kits are a lot more efficient and make more power than the old MP62 base. This car has a Katana 1 S/C kit that is running well so it's have not been doing much to mess with that. I am very curious on the LSD and what clutch you are going with. Good luck!
A lot of work to do you have. I will follow the work. I have a 2006 Elise R and when she was a few years old she got the oem supercharger kit. This year she got the hockey pucks at the chassis. These pucks you can mount when the engine undertray is removed. You remove 2 original bolts more behind at the chassis crossbeam and you mount the pucks with the new bolts. The pucks fit just between the undertray and the chassis. In that way you can raise the car on a 2 posts bridge without falling it of backwards and without the need to remove the undertray. WATCH OUT !!! Try this carefully. So you can jack up the car at that point without removing the undertray. If you want to (let)work only at the wheels/brakes. Good luck and many greetings from the Netherlands.
Hey thanks for watching and commenting. Do you remember how you offset the pucks when you installed it? I read that the offset should have larger portion of the puck towards the inside/center of the car?
@@nedsgarage I was with the mecanic who fitted them, but i don't know exactly anymore. I believe the pucks are with the big part to the sill, maybe to the middle is better for not damaging the sill when you lift the car. But i also put something between the jack and the jack point. Aslong the puck is straight under the crossbeam and you jack up the car carefully it will be ok.
Great job, I have an 06 Elise. In winter project now on mine. Adding the BOE 300 SC. Also adding a LSD to the transaxle. Challenging car to work on but rewarding results.
I am in the Chicago area. There is a good support group in the area.
Hello, i trust that you are on lotustalk forum board? I don't know much around the Chicago area unfortunately.
The boe kits look great and would be what i do if I was NA i understand the new S/C kits are a lot more efficient and make more power than the old MP62 base. This car has a Katana 1 S/C kit that is running well so it's have not been doing much to mess with that.
I am very curious on the LSD and what clutch you are going with. Good luck!
A lot of work to do you have. I will follow the work. I have a 2006 Elise R and when she was a few years old she got the oem supercharger kit. This year she got the hockey pucks at the chassis. These pucks you can mount when the engine undertray is removed. You remove 2 original bolts more behind at the chassis crossbeam and you mount the pucks with the new bolts.
The pucks fit just between the undertray and the chassis.
In that way you can raise the car on a 2 posts bridge without falling it of backwards and without the need to remove the undertray. WATCH OUT !!! Try this carefully.
So you can jack up the car at that point without removing the undertray. If you want to (let)work only at the wheels/brakes.
Good luck and many greetings from the Netherlands.
Hey thanks for watching and commenting. Do you remember how you offset the pucks when you installed it? I read that the offset should have larger portion of the puck towards the inside/center of the car?
@@nedsgarage I was with the mecanic who fitted them, but i don't know exactly anymore. I believe the pucks are with the big part to the sill, maybe to the middle is better for not damaging the sill when you lift the car. But i also put something between the jack and the jack point. Aslong the puck is straight under the crossbeam and you jack up the car carefully it will be ok.