You know this guy's spends way too much money doing the maintenance and repairs on these cars let alone the aftermarket stuff lol. But they are the best cars.
Badass car bro! I'm trying to gather all the bits to turbo my Mk4 GTI. I have a gt3582 turbo, an intercooler, some of the 3" exhaust piping and some other bits. Still have a lot more to buy. I want to build a custom adapter for the stock manifolds so I can mount the turbo just below the manifold exits. I'm thinking it will spool better than a log type manifold. I'd like to keep the stock intake manifold as well. Going for that sleeper look but I think the turbo whistle out of the 3" exhaust will give me away. I picked a .63 a/r turbine housing for quick boost. I know it's gonna choke the hell out of the top end but I'm not looking to rev more than 5 or 6k. If that turbine housing proves too restrictive I can always change it to .82 or bigger. This car is my daily and intended strictly for the street. Any advice or suggestions would be greatly appreciated. Thanks.
I thin goin .82 is the best option. also, stock manifold won't hold much over like 10-12psi. try to get into a fb group or a forum specific to the vr6 and you can get a large amount of info that will help you on your build. good luck!
Even though I’ve been around cars and working on them since I was a kid, when I saw you use your bare hands to put on that negative terminal my balls went inside me, I’ve always been finicky around batteries lol
greg oleson thank you, I appreciate it. Gonna have more vids loaded up in the near future, including some engine building and other technical stuff. Stay tuned!
Ohh know the feeling with my 2000 volkswagen 2.0 bora just with the oil pressure😂 says no oil pressure but my oil pressure gauge tells me around 3 bar of oil press at idle😂
i have a 2000 vr6 now, but my dead 2003 1.8t seem to have more pull than the vr6, am i not using the rpms correctly and changing gears to quick hi for canada
@@ReachToVictory the vr6 wasn't made with commuting in mind. And a 12v vr6, like this one, stock for stock cannot beat an s2k unless if it was maybe swapped in a mk2. A 24v however probably would be able to keep up with an s2k
I bought a 1999 beetle for 500 bucks I got a vr6 swap donor car for 150 bucks Ebay turbo kit budget is 1000 max Any ideas It's a 12v vr from a 2001 Jetta
@@haroldgonzalez2328 thanks for the reply. I've got an 02J 5 speed in my soon-to-be vrt golf. I've got a small brace for the bell housing but other than that mine only has a clutch as well. Hopefully she holds well
Hey where did you get parts for this. I have 01 gti 12v vr6 and having hard time finding kits that arent 24v. Did you buy everything separate or get a kit.
@@kiddcisco awesome man, it can be a little harder with a 24v but try to get on a fb group. there are usually people parting out projects. you can sometimes pick up some good parts for fairly cheap. just be careful with scammers.
Can you make a list of the parts you used to put this together? I wanna turbo my 12v but its really hard to find parts and i cant find any good forums on it
Gambit Gaming this is a schinmel built block. Search for schimmel performance. I used a cts manifold and an eBay gt45 turbo. The rest of the piping was custom. Make sure you subscribe, I’m gonna be going over a new build in the near future. It might be a good way to see exactly what’s involved.
Can’t even lie to you, you could do the same thing on a 1.8t. If I was to build a vr6 I would make sure it’s spinning everything from 1st to 3rd gear efficiently, but to each there own though…
I have the same car. I want to turbo it. I just can find any turbo kits online. My friend said the ko4 would be my best bet. Considering yours is already turbo I'd love you here your input. I already have the car tuned with a different ecu. Better fuel injectors. And a short ram air intake. Just lmk.
k04 is gonna be too small and there's no off the shelf manifold for it in this application. you're best bet is gonna be something like a cts turbo kit or similar.
@@spacecoupebenz6910 you should come up with a realistic goal of what your looking to make. that way you cn get some numbers on what you'd need to make it.
@@spacecoupebenz6910 a good bang for your buck to start off with would probably be a cts turbo kit. but again, without knowing what your goal is, its kind of hard to tell you
I know why your shifting right after your tires break loose, but it bothers me lol. The teenager that still lives inside of me says to hold it till you reach max speed in each gear lol
Looks like you’ve got yourself a happy lil Vdub family in your driveway :)
haha yeah man. thank you
I feel this!!!!
I have a mk4 1.8t and a mk2 8 valve
My girlfriend has a beetle 1999 gonna do a 12v vr swap and boost it
You know this guy's spends way too much money doing the maintenance and repairs on these cars let alone the aftermarket stuff lol. But they are the best cars.
Vr6 sounds so dope n/a... boosted la la la music to my ears. Gets down too🤙
thank you.
That driveway is inspiring. I had a vrt back in the day. Going to follow
The way he unlocks the car before getting in, even know the door is open, only MK4 Jetta owners know why
Amazing! I love the sound.
Driveway goals 😍😍
Chulada ese Jetta amigo saludos!
BEST VR6 Sound is definitely from the 12v 🔥🚀
Must say first time ever seeing a vr6 that hauls ass !! Very nice
I had a 2slow, now I have a tdi but I wouldn't mind a vr6 Jetta with Aristos 🤤 They're so nice haha Nice car brotha 💪🏼
thanks! I appreciate it!
I have both a Tdi and a vr6 and funny cause I started with a 2.0 got a Tdi never let go of that and now have a vr6t project car and a Tdi daily
Awe dude... i hope you have a big brake kit!.. NICE MK4!
Nice 👍 love the hood dump
I want one of these volkswagen VR6s so bad im looking for one now ❤
Nice jetta. Love the sound. What ECU are you using?
Your Jetta is my jettas literally twin
Badass car bro! I'm trying to gather all the bits to turbo my Mk4 GTI. I have a gt3582 turbo, an intercooler, some of the 3" exhaust piping and some other bits. Still have a lot more to buy. I want to build a custom adapter for the stock manifolds so I can mount the turbo just below the manifold exits. I'm thinking it will spool better than a log type manifold. I'd like to keep the stock intake manifold as well. Going for that sleeper look but I think the turbo whistle out of the 3" exhaust will give me away. I picked a .63 a/r turbine housing for quick boost. I know it's gonna choke the hell out of the top end but I'm not looking to rev more than 5 or 6k. If that turbine housing proves too restrictive I can always change it to .82 or bigger. This car is my daily and intended strictly for the street. Any advice or suggestions would be greatly appreciated. Thanks.
I thin goin .82 is the best option. also, stock manifold won't hold much over like 10-12psi. try to get into a fb group or a forum specific to the vr6 and you can get a large amount of info that will help you on your build. good luck!
*_I'm drooling!_*
I need this car man. Brutalita
thank you. I appreciate it.
Relly good sounds
Even though I’ve been around cars and working on them since I was a kid, when I saw you use your bare hands to put on that negative terminal my balls went inside me, I’ve always been finicky around batteries lol
Nice. Are there going to be any videos on the r32?
will do. ill have some more vids up soon, just been super busy with the builds. gotta take some time to record.
Here's the real question, did you throw a turbski into the r32 as well?
Hola amigo! Me gustaria saber cuantos hp lograste con el turbo!? Porfavor! Me encanto tu jetta!
Sick bro
Que chulada tengo una vr6 turbo gti mk4 99 todavía no he podido arreglarla
I love it ✌️
Is it easier to turbo a 12v then a 24v?
Sounds so pretty. Mk6 Gti and Mk4 Gli owner
greg oleson thank you, I appreciate it. Gonna have more vids loaded up in the near future, including some engine building and other technical stuff. Stay tuned!
Maybe a year late on the vid but if you see this what kit are you using for the turbo looking all over for a good one
Am i the only volkswagen dude who has noticed the low coolant light blinking?
simalmborg lol it’s not really low, the sensor tab is just broken.
Ohh know the feeling with my 2000 volkswagen 2.0 bora just with the oil pressure😂 says no oil pressure but my oil pressure gauge tells me around 3 bar of oil press at idle😂
Big Mac it’s a quick release terminal
i have a 2000 vr6 now, but my dead 2003 1.8t seem to have more pull than the vr6, am i not using the rpms correctly and changing gears to quick hi for canada
I love volkswagen
The engine is still stock? and what psi have?
jesse no!! theres more than 100hp under that s2000 xD
OLD CROW 100 grand
William Akiu sure lol
@William Akiu stock vr6 would probably best s2k in a straight line, s2k is a track car this is a commuter car
@@ReachToVictory the vr6 wasn't made with commuting in mind. And a 12v vr6, like this one, stock for stock cannot beat an s2k unless if it was maybe swapped in a mk2. A 24v however probably would be able to keep up with an s2k
Isn't this Bora? Is it just in EU?🤔
Ciser Laszlo Zoltan it’s called a Jetta in the US. same car
@@haroldgonzalez2328Than our Jetta, what is at you?🤔 it looks like Golf5 sedane...
Ciser Laszlo Zoltan not really sure what you’re saying, but here, it’s referred to as a mk4 Jetta.
@@haroldgonzalez2328 1st link, older Jetta here: lajumate.ro/vw-jetta-16-benzinaclimatronic128835-kmcruise-control-10434123.html
2nd link: newer Jetta, carzz.ro/vw-jetta-14-tsi-160-cp-dsg-trapa-piele-navi-anunt_1918262.html
@@ciserlaszlozoltan2416 romania links :)
Was this in Gainesville?
Its stock or forged ?
What ecu you have ?
I bought a 1999 beetle for 500 bucks
I got a vr6 swap donor car for 150 bucks
Ebay turbo kit budget is 1000 max
Any ideas
It's a 12v vr from a 2001 Jetta
What did you tune?
where’s that’s turbo kit from?
What have you done to the transmission for the added power if anything (excluding a clutch)? Great sounds!
Tranny is a completely stock O2M. clutchmaster fx500 and fidanza lightweight flywheel.
@@haroldgonzalez2328 thanks for the reply. I've got an 02J 5 speed in my soon-to-be vrt golf. I've got a small brace for the bell housing but other than that mine only has a clutch as well. Hopefully she holds well
@@nickhowell168 no problem. I had a O2J previously but it actually blew at the track. I liked the gearing but they aren't as strong as the O2M.
@@haroldgonzalez2328 hey buddy, can you please post a list of all the parts you use and tune as well, I have a stock 00 jetta vr6 12v, im new on VW
In Argentina this car is Bora
What mods are done to it?
What’s was your hp at the time of this video brother
Hey man what turbo kit is that ?
El turbo es el de ebay?
This is my dream
Hey where did you get parts for this. I have 01 gti 12v vr6 and having hard time finding kits that arent 24v. Did you buy everything separate or get a kit.
everything has been pieced together. you should get on vr6 forums or groups on fb and get some info.
where u find all the 24 vavle stuff, buddy is looking
@@kiddcisco this car is a 12v but the others are 24v. I pieced everything together.
@@haroldgonzalez2328 thanks man, yeah my buddy wants to go insane on his 24V, challenge is finding all the stuff at a reasonable price
@@kiddcisco awesome man, it can be a little harder with a 24v but try to get on a fb group. there are usually people parting out projects. you can sometimes pick up some good parts for fairly cheap. just be careful with scammers.
Can’t even stay in the boost it won’t stop spinning 😂😂
Fred O’Farrell tires aren’t the best but the amount of torque it makes, definitely needs stickier.
I do have slicks for the track.
Wow!!!
No rear view mirror for you?
Did you do something special to the engine to install the turbo in it, or it's stock?
Stock they can handle around 350-450hp
@@simplenipple they can handle more on the 12valve😈😈😈😈
@@pavlost1108 lucky that’s what this one is :)
Dream house puñeta😂🔥
A cuantas libras esta el jetta?🥶
15 psi. but im shooting for more soon. going standalone.
What tune is he on ?
Got a knarly misfire there! Fix'er before she blows!
not anymore, I went with a msd setup
R32 ❤️❤️❤️
De que parte de PR eres
🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
thank you... more coming soon
@@haroldgonzalez2328 your videos make me want to buy another VR lol. But if I do I'm going turbo. Nothing fancy, goal could be 300/330 whp.
@@gofast299 lol go for it! everything I have is a VR6... currently working on boosting the R32, that should be done soon
Wholey fuck I want one! So rare in NZ :(
What for turbo?
who tuned the car
👍👍
Can you make a list of the parts you used to put this together? I wanna turbo my 12v but its really hard to find parts and i cant find any good forums on it
Gambit Gaming this is a schinmel built block. Search for schimmel performance.
I used a cts manifold and an eBay gt45 turbo. The rest of the piping was custom.
Make sure you subscribe, I’m gonna be going over a new build in the near future. It might be a good way to see exactly what’s involved.
Did you get their built head aswell?
that thing moves!
it does ok. im hoping to make a ton more power in the near future!
this thing still running? that afr looked horrible 😮
How many horse power?
How much hp?
A blow off valve especially on 4 cylinders...Oh damn sounds good
Y did u not tighten your battery wire haha
Can’t even lie to you, you could do the same thing on a 1.8t. If I was to build a vr6 I would make sure it’s spinning everything from 1st to 3rd gear efficiently, but to each there own though…
Weird flex, but okay.
Still yet to see anything like this on your channel, but to each their own eh.
Po co odkłada te rece na kierownice
What kind of short runner you have?
Stack’s Hobbies I’m running a C2 Motorsports SRI.
I’m honestly not sure if they even make them any longer. I’ve had this one since 2009.
Gostaria de saber de que modelo de carro é esse volante? Top. 🇧🇷
Vw Jetta ou Golf Mk4
Nunca vi no Brasil! Achei top esse volante.
Vem no passat alemão aqui esse volante
Build list? Love the car btw ❤️
thanks you. its a 3.0 built block with a Schrick head, gt45 Chinese turbo on about 15 psi. that's the short list lol
What’m tune did you go with?
is that the wideband going to 21.8???
sensor for gauge isn't working, got wet. the working sensor is going to the ecu.
Only missing a better driver, he didnt even let her spin a little bit
Holy shit
Asi suena mi VR6
Cc vr6 owner. Lookin to upgrade to turbo if anyone has info on how to get started I’d love it the cc vr6 is hard to modify
How much power are you making ? How many pounds of boost are you running?
currently im on 15lbs, gong to be raising boost to about 25 in the near future, power wise I haven't dynoed so your guess is as good as mine lol
What size turbo are you running
@@MrTimtbone Chinese gt45
its a 69mm
Ok cool thanks for the info.
What turbo kit are you running?
what software, injectors, and maf you running?
c2 motorsports software, 630cc injectors. 4" maf housing
Harold Gonzalez thank you so much for the reply. got a vr6 wagon that I want to repeat this on
@@darksidegarage910 anytime man. glad I could assist you. make sure you post up.
How much PSI you running and what you’re using to control boost?
Running about 15psi in the vid.
I’m just using a simple spring and ball boost controller from cts
Bellakera
it sounds like a fucking skyline 😍
Vw guy 😏
No one's gonna steal the car. Tighten up the battery terminal and leave it there
I switch between cars, I disconnect the battery cause I don't usually daily this one.
I like how you’re gonna tell him he’s immune to theft, shut up
I have the same car. I want to turbo it. I just can find any turbo kits online. My friend said the ko4 would be my best bet. Considering yours is already turbo I'd love you here your input. I already have the car tuned with a different ecu. Better fuel injectors. And a short ram air intake. Just lmk.
k04 is gonna be too small and there's no off the shelf manifold for it in this application. you're best bet is gonna be something like a cts turbo kit or similar.
@@haroldgonzalez2328 ok sweet thank you!
What's the name of the rims
Brinx on what car? The blue R has enkei rpf1s and the other cars have oem R32 aristos
Класс
I’ll give you my blue 1.6 mk4 for that R32 of yours ;-)
That's not an r32
Alex Robles mine or his? xD
@@roastytoasty8815 His is a 12v vr6 not a r32... unless there was another vehicle in the video then I retract my statement
Bora !!!
Wtf that skyline vibez
I have alot of questions for you i would like to turbo my 12v nd just stuck with a few things
What questions do you have?
How much did it cost
I have a 12v corrado I want to boost it so bad what’s the ballpark figure for everything needed and total cost
@@spacecoupebenz6910 you should come up with a realistic goal of what your looking to make. that way you cn get some numbers on what you'd need to make it.
@@spacecoupebenz6910 a good bang for your buck to start off with would probably be a cts turbo kit. but again, without knowing what your goal is, its kind of hard to tell you
Para los mexicanos que dicen que son carros basura y que quien sabe que miren con un turbo 500 hp
Sweet jesus vr6's are not reliable and you slapped a turbo on that 😳 BUT ! IT'S THE BEST DAMN SOUNDING FUCKING MK4 ENGINE 😍
screampipe?
hood exit exhaust and screamer pipe
I know why your shifting right after your tires break loose, but it bothers me lol. The teenager that still lives inside of me says to hold it till you reach max speed in each gear lol
Let her eat ffs 😂
Swap?
it came with a 12v vr6.
Non mais dans fast and furious le seul qui savait il l on tuer des le premier épisode le preparateur moteurs
What turbo is? Nice sound
Thank you.. im running a Chinese gt45.