🔧Galaxy S10 Glass Only Replacement- 100% home solution😎 [4K 60FPS]
ฝัง
- เผยแพร่เมื่อ 24 ก.พ. 2020
- Time for the next flagship 👍 Done completely at home 💜
Read description for complete instruction↓↓↓↓↓
Angry of missing sound? Turn on Your favourite music and I wish nice watching for You! 🤗
My equipment:
◉Glass cutting wire: bit.ly/3GiwqkH
◉Heat plate (glass separator): bit.ly/3hNAe47
◉UV Lamp: bit.ly/3GiVLLw
◉Glass cutting machine: bit.ly/3PTnTaU
◉Glue remover: bit.ly/3Vid6YZ
◉Small autoclave (bubble remover): bit.ly/3hX7WUC
◉Big autoclave: bit.ly/3GdQTHj
◉360° Separator: bit.ly/3Gr6409
Tips:
◉Full disassembly for S10 You can watch in my earlier video:
• 🔧Galaxy S10 Display Sc...
◉If You don't have heat plate (separator), You have to ask for help someone (to hold the phone when taking off the screen)
◉Needed temperature is 80*C (max 100*C)
◉You can use hairdryer to heat the phone, temperature for sure will be enough
◉You don't need UV lamp if You use this glue:
bit.ly/SunCureLOCA
◉Use molybdenum wire to cut off the glass
◉You can find my equipment here↓↓↓↓↓
➥Our service official website: jerrymobile.pl
Join my page👍
/ jerrymobilepl
Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜 - วิทยาศาสตร์และเทคโนโลยี
![🔧Galaxy S20 Glass Replacement - Glass only complete guide [4K 60FPS] 😎](http://i.ytimg.com/vi/4ViNPeSAKqo/mqdefault.jpg)
Well, you convinced me not to replace the glass on my phone
Exactly
Lol i was thinking the same thing…although, unfortunately i may have to proceed given the cost difference…lol, well at least i know now tht im missing a BUNCH of little things like that thread stuff and others
@@Powerfulpackage i thought the same thing but i bought a glass replacement only since the digitizer with the glass all ready to go was still about $150-200 and the glass alone was only about $15 and it come with every tool you need, even the cutting wire and adhesive strips so you dont have to glue it like it in these videos and works incredibley!! I didnt know what the "thread" was at first either until i did some research but you also definitely DONT have to un assemble the whole phone and back like in this video.!
I can still see a crack on the screen. Oh, wait, that's my phone
Same lol
The only video on youtube makes sense on replacing the screen not oled 😊😊 good job my friend
The screen is OLED tho
Hi there what liquid do you use after clean oca glue by isopropyl? Because the lcd looks smooth.
Very hard work, great grandfather, I've been waiting for for a while I like loca glue, I like better than OCA in Edge screens Thank you very hard grandfather good luck Waiting for not10plus Loca and UV
What is the little hand held device called that you use to get rid of all the left over glue type stuff from the back of the screen? Looks like it spinning metal rod..
Are the wrinkles you can see under the light from the damage done whilst removing the front?
This probably doesn't come out as smooth (looks a little wavy) as using a oca lamination machine, correct? I bought an s10 hoping to be able to replace the glass, but maybe it's not such a good idea.
Very clean and nice job. Well done 👏
Except for the wavy LCD underneath. Guarantee if I handed those results to a customer they would reject it right away.
This is nikki anderson I been married for nineteen years
Is there a particular tool kit you can purchase to do this at home?
Here 😁 www.ebay.com/str/expresscelldepot
WOW. PERFECT this is the video i have been looking for.great job👍
pls can i use this mothod on s20fe i bought the glass without oca cause it makes the camera cut out looks bigger after installing but now am wondering if the front camera will still be clear after i install it using loca. pls help🙏
Can you answer this question ASAP? I broke the protective glass on my s10+ but the touchscreen is completely fine and the device functions as normal. I found a replacement on amazon for $30 and am wondering if that is all I need for the repair. Is the digitizer in need of replacement as well? Thank you so much!!
Not if the touch works but it may break when disassembling it i would recommend just the whole new screen and frame like what most places sell it will be less of a struggle and less likely to break anything else, I’m not a professional just my opinion
@@jackgolden1774 thanks dude!
@@jackgolden1774 coming from a professional, you gave the right answer! Don't mess with the glass only process, it is only headache and half the time you will have issues afterwards after you waste 6 hours attempting glass only process
What is the solution you use to unglue de seal components and the screen lens? U use as a little bottle.
Isopropyl alcohol 99% (95% or more)
@JerryMobile
Are there any Drawbacks of changing/Replacing Screen with Aftermarket one...?
1. Will it Impact Touch Sensitivity ?
2. Will it reduce Clarity?
3. Will it be less reliable/ more Fragile than Oem/Orginal Screen?
4. Any other drawbacks / side effects?
I may not be Jerry Mobile but I know quite a bit about glass only replacements so
1. if you are careful no
2. only if you buy a cheap replacement
3. only if its cheap
4. not really
hope I could help
Jeśli dotyk działa wystarczy wymienić tylko szybkę, czy trzeba otwierać telefon czy można to zrobić bez rozbierania telefonu?
Did you use 90°C in machine at the time that you used isopropyl alcohol ? What is that plastic blade ? How much mm has it ?
Which temperature are you using to take off screen from frame ? Should i use blade 0.02 mm in it ?
Other videos suggest using a blow dryer and a credit card or plastic object instead of steel to unmount it
The hardest part here is getting that razer blade in the correct spot, I've spoiled at least 40 edge screens so far trying to learn that.
This might help you out. Never use metal tools around any screen! But especially don't use metal tools around OLED displays that's a must. OLED is so delicate it will snap under the smallest amount of pressure. Plastic picks are equally as good as razorblades but limit the risk of damage. You really have to handle it so gently I emphasize this greatly.
I could literally grab an amoled display without glass right now and if I gave a little too much force with my finger it would break under the pressure
The goal is 100 percent function w/ no defects no matter how long it takes to do it perfectly. People mess up all the time so I get it I broke more Galaxy S5's then I fixed but once I realized the method I never unlearned the suffering when I broke an S5 so I try to help people out!
@@eazysmokes3743 Hi man. What kind of material is required to do this ?He is using Propyl Alcohol ? I have a kit of small blade between 10mm and 0.01mm
Yes 100% home solution for sure
This is what i need
What was the reason for removing the screen from the frame before removing the glass ?
Would the heating up of the glass damage the internal components if you don't strip it down first ?
It is so the OCA doesn't go to the bottom of the bezel under the display and start damaging electronic components
The reason is that the glass is curved and it is impossible to separate the glass and display with wire if the glass and frame is together. Components would likly sirvive the heat and the loca glue but you cannot separate display from the frame without taking matherboard out and other components
guys remove the glass all the time without seperating from frame.
Will the phone work fine after replacement!any bad experiences? Reply me please! I am supposed to change my display!!
How thick is that molybdenum wire you are using in video please? Is it 0.1 mm thick ? Thank you
It's 0.06mm 😉
@@JerryMobilePL perfect! many thanks for you reply ;-) have a nice day
Very good video! Congratulations! One question, what temperature you use on the machine? Thank you.
I use 90⁰C 😁
@@JerryMobilePL Ok! Thank you 👍
@@JerryMobilePL No to 90 czy 100 w koncu?🤔
@@patrykklepacki5958 90 i 100 nie robi żadnej różnicy, w obu przypadkach nic się nie uszkodzi 😉
Glass only replacement? So what is the screen made out of then as loads of videos say screen yet the repaire shows the back
The screen is made of glass the touch is made of plastic full of ink
What liquid was used on the glue to soften it? Thanks
same question ;D
@@Moddedby loca remover
Isopropyl alchol
I need this done to my s10+. I have two devices but one has a bad Lcd Bleeding but good front glass and mine is Broken front glass but good Lcd.. can you help me out...?
Hi Jerry, does it work for samsung Note 9 as well ?
I saw an equipment in around minute 2: 00 - 3:00, what does it use for ?
@@AldenTechnology to softhen the adhesive under the to pull it of the frame
Yes this does work for the note 9
Części, czy można w ten sposób (klejem UV) przykleić szkło pokryte już klejem OCA. Tzn czy OCA + LOCA jednocześnie to dobry pomysł?
Cześć, kleje nie będą się siebie trzymać więc przed klejeniem OCĘ trzeba zdjąć z szyby 😁
@@JerryMobilePL Dziękuję. Tego się obawiałem.
Can u do this to the s 20?
Is there a problem if I don't open the phone? Will it work If I just spread the glue over the black film and camera and then set the glass?
what kind of liquid u use in 1:58 ?
anyway thanks for video
Should be just alcohol 99% I think
@@Zx14rrrrrrrrrrr exactly
do a lg k11 +
only glass replacement video
Cześć.
Separuje tak samo jak Ty listkiem wyświetlacz od ramki, ale często po tej operacji powstają poziome pasy, z reguły w miejscach pęknięcia szybki.
I nie wiem jak bym się starał to delikatnie i powoli robić, aby jak najmniej w tych miejscach wypychać listkiem wyświetlacz pod pęknięciem, to i tak powstają pasy poziome lub plamka czarna przy krawędzi i wyświetlacz do kosza.
Też masz takie przypadki?
Zdarzają się.. jeszcze więcej delikatności i będzie dobrze 😉
@@JerryMobilePL jasne. Dzięki za odpowiedź i powodzonka.
What's do you recommend is the best way and timing to cleanup the LOCA glue that seeps into the front cam holes to have clear lens? I see you've used "mystery liquid" (Denatured alcohol?) and q-tips.
Thanks for the very informational vid!
It wouldn't be easy.. if the front camera isn's clear, in 90% You have to replace it. If glue goes inside it's over. But if glue only a bit goes on the lens, You can clean it with isopropanol alcohol 😉
@@JerryMobilePL ok thanks! Will give it a go.
Use OCA sheets instead of loca glue
Does it hurt its waterproofing.
Jakie są dzis koszta s10 zwykle ?
which method is best ? using glue or OCA lamination method ?
OCA is better, but machines are very very expensive 😏
do i need to buy a digitizer if only the front glass is broken on s10 plus? repair shop said it will cost $380 to repair screen when I called for quote.. they said if ordered the front glass replacement myself and brought it in they'd put it on for $25, i just need to know if i need digitizer or not or just the front glass? any help would be much appreciated
You just need to change the front glass, some might not change it if there is a little damage to the digitizer
Coming from a professional, it is best if you just replace the entire frame assembly and don't do a glass-only process. See my other responses on this video for the exact reasons. You will thank me. 🥰
Lcd looks rippled as even with the new glass, is this because of excessive heat 🤔
Is it necessary to remove the screen from the frame?
no
Hey there I have a very important question that I just can’t figure out and thinking someone can help
So I took my s10 screen off followed all the steps but I pulled the glass off first after all the mother board off and after the glass came off under it was a type of silver colour and wasn’t black and so I got my new outa glass screen and I put that on top of it but it isn’t black and it is just see through can someone please help?
If I understand correct, You damaged polarizer. Have to replace it
Pls what is the name of the baking gun thanks.
Hi can i ask, how thick wire are you using? 0.04mm or more?
0.03 or 0.028
@@aronacs8920 Is it metal blade recommended for doing it ?
Hi sir shop kha par ha ....
Holy those waves a side affect of using loca vs oca?
If You use OCA will be a bit better, but always refubrish wouldn't be 100% perfect. But waves will be smaller in a few days
I broke my s1O but the touch is working perfectly. What do I need to change and what cost?
Same
Well if you want to attempt a glass only replacement, it would cost you around 20€, but don’t put your faith on this, it’s not really easy!
@@F91W only 20$ wheree
@@senadalikaj125 i mean the glass kit man
Tell me how they could've just made the aluminum frame smaller to shrink those bezels been living with a smartphone chin for years.
I recommend watching Mkbhd’s video on smartphone bezels, it goes into more depth than I can explain. Basically, the chin is there because there is a ribbon connector that needs to connect the motherboard and the display in order for it to work. That requires space, as the ribbon connector is always placed and one end of the display. Because a chin looks nicer than a forehead, companies generally choose the bottom of the display as the place for the ribbon connector. When the chin get’s smaller, companies are basically just pushing the connector closer and closer to the edge of the display. In apple’s case, they actually folded the display underneath itself in order to get rid of a chin. Apple worked on that process for years, and no other company has yet to build a reliable and consistent enough assembly line to do that. Next in line is samsung, who are doing that as we speak. Hope that answers you’re query!
Pixel 5 has all the side and edge bezels are equal, a very nice phone
I broke my s10+ glass but im facing some touch issue aswell ia it bcoz of crack on screen or i have to replace whole combo???
Whole display then
Ok
Thanks
@@Askaly Me as well but my phone worked a week before the touch screan fucked up. Should I try to do your methode before changing the LDC ? Thank you
At the end you can see dents or bubbles in the phone is there any way you can get it out
Yes. But Jerry is always convenient with the actual truth. That would spoil his 100% at home video title. You'll need a vacuum chamber, also a press. You'll need to do the work in a dust free chamber and that kind of setup is expensive, so not a 100% at home video.
Perfect.
Super excellent job it is impossible with UV glue but you are done bro. From India
can i use B-7000 instead loca glue?? for the glass screen
No
Where is your shop locate?
why you don't use oca ?
Becouse it's home solution
Hi, what is the tool you use at 6:50?
LCD Touch Screen LOCA OCA Electric Glue Remover Machine Tool For Mobile Phone TH
Can I use t8000?
My son has the S10 and dropped and cracked the screen. Half the screen is white. The touch screen still works and the on screen fingerprint scanner. And you can barely see the items as if the brightness is turned to 95% white. Would I need to replace just the glass or the whole screen?
You’ll need to replace the whole thing
Can this be done at home?
can Bioethanol be used Fuel EcoLine Clean Burn
HELP!!!!!! Hola desde España, e cambiado el cristal de mi samsung A50, pegando lo con gel UV, pero a la hora de pegar la pantalla al chasis con un pegamento B7000, salen como unas marcas en los bordes, me gustaría saber si te puedo enviar unas fotos para que las veas y me puedas decir que sale mal, e repetido el proceso de quitar y poner el cristal 4 veces, y en todas ellas me vuelvan a salir las marcas, gracias por todo.
No amigo el solo habla inglés 😂💔
Hello Friend
I tried to remove the screen, but it was removed in some places along with the black film, what can I do now? Thank you
Hi :) just heat the screen and slowly take the film on the sides. Will be nice to remove it, becouse screen have to be glued evenly
Czy mógł bym prosić jakiś kontakt? Mam kilka pytań.
Dziekuje
OMG 😁👍👍
Sir samsung s10 ki original touch glass price kya hai plz sir
Can I use this method with Samsung galaxy s21 ultra
Sure wish u could fix mine
Hi,
Excellent job there.
I wonder if the screen is the same for both the snapdragon and exynos model for the s10+?
Thanks 😁
Of course it's the same.
Jerry Mobile Hi,
So there shouldn’t be any issues right? Samsung told me that because I use the exynos version they may have to import that version since the version they use where I am is snapdragon.
BUllshit right? My S10 screen cracked.
what kind of cleaner you use?
It is isopropanol alcohol
Has the sense of touch changed
best
How many degrees do you put or put on the display?
90 degrees of Celcius 😉
Hi man, what is the name of the tool you use at 2:15 ?
I don't know the name, but You can find it in my video description 😉
This piece of metal you can also use plastic
How can I get the s10 gorilla glass
Witam. Ile kosztuje u was wymiana samej szybki w telefonie Xiaomi 12 pro?
Witam, około tysiaka 😉
Does the ultrasonic fingerprint sensor work after that
have you not watched the video?
what is that sheet of metal called in 2:19 ?
He did almost everything perfect... except gluing the display and glass
Does that unit have suction to hold lcd for you?
Yes exactly
@@JerryMobilePL I sent mailed mine to have glass replaced but they sent it back because it had a spot. Said spot could get bigger by replacing glass. I'm not even going to try. Have messed up several lcd's trying to do it myself.
Pakek caeran apa bos itu buat ngelepas lem nya
pakai thinner atau alkohol bisa
Can I use loca glue on samsung galaxy s21 ultra
Do you do repairs like these? Or is there a kit I can buy? I need a new glass screen for my S10+ but all repair shops near me want around $300 (when the glass screen itself is only like $20)
You can try but as a hobby. I mean, give it a shot, but let it be plan B, it’s way harder than it looks
Repair shops will just put a new screen on that's why it's 300. This process can be hell.
The CORRECT PART costs them around $250. The rest is about an hour labour.
Yes, you CAN buy a glass-only lens but the results are VERY poor with wavy LCD underneath. You will pay for $20 on parts and usually around 4 hours in labour and receive substandard results as seen in the video. Please just do the repair right the first time using the correct parts and you will thank me and the others who warn people!
Source:am a leading repair tech in my state with 22 years experience.
Bhaiya aap ki shop kahan per hai
It's definitely not very hard but you made it look very hard.
What type of string did you use to remove the glass, was it just a regular one or a thin metal one?
It is molybdenum wire, 0.05mm
@@JerryMobilePL Thank you so much for replying, and THANKS FOR HELP!!
Gdzie można się kontaktować w celu wykonania takiej właśnie usługi?
FB 😁
Who's watching on S10 plus?
Why does the screen look all bumpy under the glass after replacement
Hey why under the screen it looks like waves.
lcd is flexeble...that's why its not glass lcd
@@sigmaSERVIS - Be quiet fool. Its oca glue.
@@matthewyabsley hahaha you will tell me what is oca glue? i just finish iphone x
samsung a80
j4+
iph 8
samaung s10
please...don't be a idiot...
and in video is not OCA
its fucking LOCA ....learn about it before you try to speak with a pro 😉
Will fingerprint sensor work afterwards?
Of course it works ☺️
the bezels are TINY!!!
Glue uv model?
You can find in description :)
@@JerryMobilePL tanks!
Dzień dobry 😃 jaki jest koszt takiej naprawy ??
Hej 😁 5 stówek brutto
przecież za 300zl robią refabrykacje na plastrach oca a nie chałupniczymi metodami jak na filmie, branie za to więcej niż 100zł to czysta nieprzyzwoitość.
Is it possible to then remove the fixed display and put it on a different frame?
Why not, of course. Just do the first steps 😉
Where r u from?
Can I replace just the oled display
Of course, but glass is much cheaper 😉
For 150$
How can I tell if the new screen is original?
Samsung dont sell only the glass the only sell the whole thing
@@maxnaumov8587 man you can go to company autorized store and they repair phone
Is it possible with s20?
Yes, soon video :)
Only touch glass price
Co to za płyn który pozwala odkleić ten wyświetlacz? Nie szkodzi na elementy elektroniki?
To izoporopanol, absolutnie nie szkodzi 😉