I can't believe this popped up. I literally just did this this morning. I use an old rag and keep the over spray from getting on the wall behind. I usually do this once a year in spring, but if I hear it getting louder, I do it a second time. Had one spring pop about 5 years ago after 13 years in our house.
I lube the hinges on my garage door about twice a month because I park my car in the garage. I never thought about lubricating the springs and cable wheels. I cleaned the wheel tracts and lubed the spring and cable wind up wheels and the door is much quieter. Thank you for the video.
I followed what you did and I've never had my garage door run so smooth and quiet .Your directions are well worth following. Thanks for the great instructions.
Tip I taught myself. I used pieces of cardboard, placing them behind where I was spraying in addition to shop towels. Cardboard helps protect areas from spray/over spray.
It is important to know why the torsion spring needs a good quality lube regularly. The long spring is designed to spread the torque over the whole spring, so each coil takes its fair share of the load, and each coil only sees a small portion of the movement. If the spring gets dry some coils can stick together and not slide over each other, and this causes the portion of spring that is actually moving to actually have to move further and see more load. This uneven load is what causes springs to break.... So even if you do not lube anything else on the door, keep the spring lubed to even out the load along the spring. As Far as lubricants are concerned regular WD-40 should go into the 'adhesive' box, silicone lube does not dry out and does not attract dirt like WD-40 ( regular formula ) WD took over 3in1 company and their lubes improved, but before that they were a glue company.
@@erleed I am not an expert at garage doors, but I can tell you I've run into similar advice from auto mechanics and bicycle techs. WD-40 is very light weight. It can be good as a penetrating fluid and good for cleaning, but as a lubricant, not so good. I think it was included simply because it is the one spray that many people would already have in their homes. It might be better than nothing, but I believe he was trying to emphasize that you should purchase the appropriate lubricant. If you only have one or two doors, a single can should last you years, so the cost is trivial.
Thank you so much for your extremely clear and detailed instructions for lubricating my garage door. I really appreciated the fact that your camera zoomed in so that we could see the small details of exactly where to put the lubricant!
Thank you so much for the video. I was actually doing a pretty decent job except, I was not lubricating the end drums and torsion springs. Very helpful video. Thanks again!
Thank you so much for this video! I would also add to check all the hinge nuts- many of mine were not torqued all the way and one was rattling because it was so loose!
Please use a dry lubricant on all the parts of your garage door as a dry lubricant, or graphite based lubricant will not attract the dust and dirt. That’s promotes where I’ve used it on dirtbike chains for 35 years it works.💪🏻🏁
they don't- a corrosion prevention or water dispersant is all thats needed on the springs themselves. the point is to keep corrosion from immobilizing the spring coils.
Good video...Friction is required for the rollers to turn. If they are lubricated, they'll lose traction as they enter the track's radius and start gliding.Eventually they'll flatten at some point.Do clean the roller stem and re-grease it, but keep the rollers-and the track itself- dry.
I use a good door lube for the rollers, drums, cables, pins and hinges, as it leaves a coating behind and lasts much, much longer than WD-40. I do like using WD-40 to spray down the springs... it displaces water, soaks into the metal to repel water. My springs and hinges look like new, 15+ years on and live in Western NY.
Very nice video. Thank you! I use a small amount of heavy lithium grease in the tracks. It really makes the garage door run much quieter and more smoothly. I understand the concern about attracting dust, but I think that is overblown. The garage door of my last house was lubricated with this method, and the rollers are still going strong after 50+ years.
I agree with you. Why wouldn't one lubricate the rollers; Don't they already have a lubricant in them and they are open to the air. If the garage door manufacturers and their service industry feels you should not lubricate them, then maybe they should use a sealed bearing. From the farm!
@@funnyfarm5555 "why wouldn't you lubricate the rollers" simple answer: they have bearings and they are wheels do you lubricate the road and your car tires too? lol
@@gg-gn3re At least on the doors someone installed on the property I bought the roll up doors have crappy bearings; What I meant to say was to lubricate the bearings in the center of the wheels not the wheels themselves.
I have an old old fiberglass door that has been the best we got it after the basketball broke a window and was a verry heavy wooden door that blasted those springs out of this world .never looked back it's been the best door 35.00 could buy back in the day.no hinge has a long one between panels barely needs any service.have a good day.
I had a house with garage door springs on each side. Several occasions of the springs breaking and a huge bang but contained with the cables run inside the springs. Dangerous spring fails. Does damage. Then the door is heavy! They put in a central coil spring as a replacement finally. They said lube it once a year. I got a new house and has a door opener. I lubed the spring as it was dry and maybe never lubed. Lubed the heck out of everything. Made the door opener function quieter, anyway.
It is important to know why the torsion spring needs a good quality lube regularly. The long spring is designed to spread the torque over the whole spring, so each coil takes its fair share of the load, and each coil only sees a small portion of the movement. If the spring gets dry some coils can stick together and not slide over each other, and this causes the portion of spring that is actually moving to actually have to move further and see more load. This uneven load is what causes springs to break.... So even if you do not lube anything else on the door, keep the spring lubed to even out the load along the spring. As Far as lubricants are concerned regular WD-40 should go into the 'adhesive' box, silicone lube does not dry out and does not attract dirt like WD-40 ( regular formula ) WD took over 3in1 company and their lubes improved, but before that they were a glue company.
@@chrissmith2114 they don't need lubrication- they only need to be kept free to operate as they are intended. if they are kept dry- thats a good start. WD40 was developed to be used as a water dispersant- the product team had no intention of creating a glue.
@@tommurphy4307 IIRC the WD -40 team sold the formula to 'Gorilla' for their glue. WD--40 was meant to move the water off the surface and leave a 'coating' behind to prevent corrosion - trouble is that film is the best dirt attractor ever made and anything sprayed with WD-40 is better at picking up dirt than a Dyson cyclone.
I use a graphite-based dry lube for the track wheel bearing. A little goes a long way. I actually use this kind of stuff on the entire door inclunding the spring. It is a bit messy, so protect what you don't want overspray on. I use it because it lasts longer and better at -35° to -40°. I have not needed to lube the spring in 5 years and I can lift the door easily with one hand. Cheers from northern Alberta, Canada.
Ed, enjoyed this video. I learned about lubricating the torsion springs. Never ever lubed these before and makes sense. i am wondering your recommendation for lubricating the drive chain and T-Track were the chain slides. Our chain needs adjusted to take up the slack in the chain. i figured out how to adjust this. Need to know what lube you recommend? I was thinking a Motor Cycle chain lube, your thoughts?
I lubed basically all the same areas but used 3 in 1. Never saw any videos on doing this. It worked great but had plenty of drips on the cars for a few days. Don't care how long it lasts - house is a rental! But the grinding noises are gone and it works much smoother.
It is important to know why the torsion spring needs a good quality lube regularly. The long spring is designed to spread the torque over the whole spring, so each coil takes its fair share of the load, and each coil only sees a small portion of the movement. If the spring gets dry some coils can stick together and not slide over each other, and this causes the portion of spring that is actually moving to actually have to move further and see more load. This uneven load is what causes springs to break.... So even if you do not lube anything else on the door, keep the spring lubed to even out the load along the spring. As Far as lubricants are concerned regular WD-40 should go into the 'adhesive' box, silicone lube does not dry out and does not attract dirt like WD-40 ( regular formula ) WD took over 3in1 company and their lubes improved, but before that they were a glue company.
@@chrissmith2114 Your explanation reminds me of plate tectonics, and the forces that cause earthquakes... :-) I used the same garage door lube as I did for the rails.
It is important to know why the torsion spring needs a good quality lube regularly. The long spring is designed to spread the torque over the whole spring, so each coil takes its fair share of the load, and each coil only sees a small portion of the movement. If the spring gets dry some coils can stick together and not slide over each other, and this causes the portion of spring that is actually moving to actually have to move further and see more load. This uneven load is what causes springs to break.... So even if you do not lube anything else on the door, keep the spring lubed to even out the load along the spring. As Far as lubricants are concerned regular WD-40 should go into the 'adhesive' box, silicone lube does not dry out and does not attract dirt like WD-40 ( regular formula ) WD took over 3in1 company and their lubes improved, but before that they were a glue company.
you don't- they just need to be kept clean and dry. if they have a coating of rust- anti-seize them with a brush- getting the stuff in between the coils.
I found that WD-40 makes dry silicone lube that has a strong pressurized nozzle that doesn't fly off to be really good. The pressure pushes a stream into the tight hinge cavities that normally can't get penetrated by other types I've tried.
Hey Ed, long time mechanical shop owner and res home builder here; found BG -IN FORCE long ago...U guy's GOTTA get U some of that! C a local auto shop @ buy-in a can. Great job!
I also lube the overhead chain and wheels since there are small wheel bearings that will wear down without lubrication like on a car. Everything will run smoother and quieter !!!😊😊
Good advice, but I would also recommend at the same time re-tightening the nuts on the bolts which hold the hinges in place, especially on wooden doors. Between expansion and compression in the wood due to weather related changes, and normal loosening caused by constant usage, they tend to loosen up.
It is important to know why the torsion spring needs a good quality lube regularly. The long spring is designed to spread the torque over the whole spring, so each coil takes its fair share of the load, and each coil only sees a small portion of the movement. If the spring gets dry some coils can stick together and not slide over each other, and this causes the portion of spring that is actually moving to actually have to move further and see more load. This uneven load is what causes springs to break.... So even if you do not lube anything else on the door, keep the spring lubed to even out the load along the spring. As Far as lubricants are concerned regular WD-40 should go into the 'adhesive' box, silicone lube does not dry out and does not attract dirt like WD-40 ( regular formula ) WD took over 3in1 company and their lubes improved, but before that they were a glue company.
I've used it as a metal & mechanical cleaner since very early 70's as well as a moisture dispersant in electrical components... Works great. Back in the day when it had fish oil in it we would use it is a lure attractant for fishing. @@tommurphy4307
When I inquired about lubrication for the roller stems, I was directed to a white lithium grease spray by Blaster. I was also told this would be acceptable for the hinges, albeit a bit messier than the silicone sprays. Any opinions on that?
Thanks for sharing it. I'm wondering what lubricant to use in cold weather areas in the north of Canada. The temperature in the town I'm living in goes down to - 48 deg C most of the winter season.
Hi,how are you ,I have a double garage detached house , I had installed 2 garage doors in separated timing ( I believe almost 10 years apart, we only used the remote to open the garage Doors,we already forgot to use the security # to enter the garage from outside, we need to do that because sometime if anyone of the family members forgot to key for our main door, we can use the garage door to enter our house, the problem is since we almost never use to the garage door to enter the house, therefore we forgot the # to open it, therefore I need your advise of how to set a new # or retreat our old # ,please advise, best regards
Many see WD 40 as a miracle product. But using it on garage door components, it’s a great dust collector. Makes dust and debris gunk up the rollers and hinges. 3 in 1 garage door lubricant is my favorite. I worked at Loews and ironically WD40 was sold where garage door kits and components were staged. I mentioned to the store manager how WD was the worse stuff to use and it would be wise to replace it with the good stuff. Guess what? Never did it.
Good video. Thanks for sharing. I have a question... lithium vs silicon lube... I was told by the guy who replaced spring on my garage door to use lithium based spray lube whereas you have recommended silicon. Requesting folks with knowledge on this to please share it with us. Thanks in advance.
We cleaned our hands with WD-40 in the oilfield. It cuts grease great! No good for garage doors. Get a $10 tub of bearing grease and clean with WD-40 and re-apply as needed on the tracks. 👍
waste of beeswax and that stuff is pricey. the wheels have enclosed balls in them. putting lubricant or wax in the wheel tracks does nothing but wastes time and money.
I can't believe this popped up. I literally just did this this morning. I use an old rag and keep the over spray from getting on the wall behind. I usually do this once a year in spring, but if I hear it getting louder, I do it a second time. Had one spring pop about 5 years ago after 13 years in our house.
Check your house for hidden cameras and/or microphones! TV could be spying on you!? Check the toilet tank for spy devices!
I lube the hinges on my garage door about twice a month because I park my car in the garage. I never thought about lubricating the springs and cable wheels. I cleaned the wheel tracts and lubed the spring and cable wind up wheels and the door is much quieter. Thank you for the video.
I followed what you did and I've never had my garage door run so smooth and quiet .Your directions are well worth following. Thanks for the great instructions.
Tip I taught myself. I used pieces of cardboard, placing them behind where I was spraying in addition to shop towels. Cardboard helps protect areas from spray/over spray.
Clear and concise presentation. Thanks so much.
Didn't realize I needed to lube the springs themselves too. Thanks!. Excellent, helpful video! Thank you !.
You're welcome!
It is important to know why the torsion spring needs a good quality lube regularly. The long spring is designed to spread the torque over the whole spring, so each coil takes its fair share of the load, and each coil only sees a small portion of the movement. If the spring gets dry some coils can stick together and not slide over each other, and this causes the portion of spring that is actually moving to actually have to move further and see more load. This uneven load is what causes springs to break.... So even if you do not lube anything else on the door, keep the spring lubed to even out the load along the spring. As Far as lubricants are concerned regular WD-40 should go into the 'adhesive' box, silicone lube does not dry out and does not attract dirt like WD-40 ( regular formula ) WD took over 3in1 company and their lubes improved, but before that they were a glue company.
@@heritagedoor I noticed you had a bottle of WD-40. What role does WD-40 play in lubricating the garage door?
@@erleed I am not an expert at garage doors, but I can tell you I've run into similar advice from auto mechanics and bicycle techs. WD-40 is very light weight. It can be good as a penetrating fluid and good for cleaning, but as a lubricant, not so good. I think it was included simply because it is the one spray that many people would already have in their homes. It might be better than nothing, but I believe he was trying to emphasize that you should purchase the appropriate lubricant. If you only have one or two doors, a single can should last you years, so the cost is trivial.
@@chrissmith2114 LOL, that doesn't mean that WD-40 is a glue.
Thank you so much for your extremely clear and detailed instructions for lubricating my garage door. I really appreciated the fact that your camera zoomed in so that we could see the small details of exactly where to put the lubricant!
well done...THX for a great video........I never knew I was supposed to lube the big spring on top...live and learn..!!!!
Thank you for the down-to-the-point video. It was a very informative video. I learned what to do, and what lubricants not to use.
Thank you so much for the video. I was actually doing a pretty decent job except, I was not lubricating the end drums and torsion springs. Very helpful video. Thanks again!
Thank you so much for this video! I would also add to check all the hinge nuts- many of mine were not torqued all the way and one was rattling because it was so loose!
Thank you for the maintenance tips.
Thank you so much for sharing; My garage door was making some squeaky noise and this idea didn't go thru my mind. Great job
Great info, like many here, I didn't know the torsion springs needed lubrication too. Thanks.
Great advice. How many people do what I do and forget this important maintenance measure. Simple too! Thanks.
Glad it was helpful!
Thank you for offering good, free advice.
Thanks for the video, at 72 never did this before. Husband did this stuff....lol
Please use a dry lubricant on all the parts of your garage door as a dry lubricant, or graphite based lubricant will not attract the dust and dirt. That’s promotes where I’ve used it on dirtbike chains for 35 years it works.💪🏻🏁
@@daveplumb6246do you have a favorite?
thank you.. had no idea the large spring needed lube. great info, appreciated !
they don't- a corrosion prevention or water dispersant is all thats needed on the springs themselves. the point is to keep corrosion from immobilizing the spring coils.
Good video...Friction is required for the rollers to turn. If they are lubricated, they'll lose traction as they enter the track's radius and start gliding.Eventually they'll flatten at some point.Do clean the roller stem and re-grease it, but keep the rollers-and the track itself- dry.
and thats what WD40 does- keeps stuff dry
Very nice presentation and useful information! A huge thanks for sharing!
I use a good door lube for the rollers, drums, cables, pins and hinges, as it leaves a coating behind and lasts much, much longer than WD-40. I do like using WD-40 to spray down the springs... it displaces water, soaks into the metal to repel water. My springs and hinges look like new, 15+ years on and live in Western NY.
Hey, me too. We have the extra corrosive effect of all that salt too. Thanks for your thoughts. Ps. Go Bills....
WD-40 does not 'soak into' any type of metal. its designed to displace water and prevent corrosion while being simple to completely remove.
I just did this with lithium blaster spray after replacing all my wheels with silicone ones. Door is much quieter now. Thanks.
Very nice video. Thank you! I use a small amount of heavy lithium grease in the tracks. It really makes the garage door run much quieter and more smoothly. I understand the concern about attracting dust, but I think that is overblown. The garage door of my last house was lubricated with this method, and the rollers are still going strong after 50+ years.
I agree with you. Why wouldn't one lubricate the rollers; Don't they already have a lubricant in them and they are open to the air. If the garage door manufacturers and their service industry feels you should not lubricate them, then maybe they should use a sealed bearing. From the farm!
A little common sense and you be alright.......lube what moves.........
Great tip!
@@funnyfarm5555 "why wouldn't you lubricate the rollers" simple answer: they have bearings and they are wheels
do you lubricate the road and your car tires too? lol
@@gg-gn3re At least on the doors someone installed on the property I bought the roll up doors have crappy bearings; What I meant to say was to lubricate the bearings in the center of the wheels not the wheels themselves.
Thank you for a very beautiful presentation, concise, precise and truly informational.
Glad it was helpful!
Very useful information ... thanks!
Been lubricating my garage doors with WD 40 for 45 years. Never had a squeak or failure. I use WD 40 for many things...a great product!!
I thought I was the only person who actually did this kind of maintenance on doors. But I did do this on trailers and trucks for 40 years.
Awesome video. Just installed a new door and following these recommendations.
I have an old old fiberglass door that has been the best we got it after the basketball broke a window and was a verry heavy wooden door that blasted those springs out of this world .never looked back it's been the best door 35.00 could buy back in the day.no hinge has a long one between panels barely needs any service.have a good day.
Thank you for your video. I saved a lot of money for sure.
I had a house with garage door springs on each side. Several occasions of the springs breaking and a huge bang but contained with the cables run inside the springs. Dangerous spring fails. Does damage. Then the door is heavy! They put in a central coil spring as a replacement finally. They said lube it once a year. I got a new house and has a door opener. I lubed the spring as it was dry and maybe never lubed. Lubed the heck out of everything. Made the door opener function quieter, anyway.
It is important to know why the torsion spring needs a good quality lube regularly. The long spring is designed to spread the torque over the whole spring, so each coil takes its fair share of the load, and each coil only sees a small portion of the movement. If the spring gets dry some coils can stick together and not slide over each other, and this causes the portion of spring that is actually moving to actually have to move further and see more load. This uneven load is what causes springs to break.... So even if you do not lube anything else on the door, keep the spring lubed to even out the load along the spring. As Far as lubricants are concerned regular WD-40 should go into the 'adhesive' box, silicone lube does not dry out and does not attract dirt like WD-40 ( regular formula ) WD took over 3in1 company and their lubes improved, but before that they were a glue company.
@@chrissmith2114 they don't need lubrication- they only need to be kept free to operate as they are intended. if they are kept dry- thats a good start. WD40 was developed to be used as a water dispersant- the product team had no intention of creating a glue.
@@tommurphy4307 IIRC the WD -40 team sold the formula to 'Gorilla' for their glue. WD--40 was meant to move the water off the surface and leave a 'coating' behind to prevent corrosion - trouble is that film is the best dirt attractor ever made and anything sprayed with WD-40 is better at picking up dirt than a Dyson cyclone.
Thank you!!. I was going to set wd40 in the door. You explain really well why not is good idea
What about the chain drive? Lube or no lube? Thanks for all the other helpful info.
do you run your bicycle chains dry? same deal....
Yeah why not show that?
Thank you! Now I can do the job myself.
Thanks for that short to the point video, very helpful.
Glad it was helpful!
Great video, nicely detailed and easy to understand. Thank you!
Thanks for sharing
I use a graphite-based dry lube for the track wheel bearing. A little goes a long way. I actually use this kind of stuff on the entire door inclunding the spring. It is a bit messy, so protect what you don't want overspray on. I use it because it lasts longer and better at -35° to -40°. I have not needed to lube the spring in 5 years and I can lift the door easily with one hand. Cheers from northern Alberta, Canada.
Graphite causes wear. Ask a good locksmith. Instead use silicon or teflon based lubes. Those do not attract dirt or cause wear.
that kind of sucks- i can open and close my door with my thumb- or pinkie- or nose.
Ed, enjoyed this video. I learned about lubricating the torsion
springs. Never ever lubed these before and makes sense. i am wondering your recommendation for lubricating the drive chain and T-Track were the chain slides. Our chain needs adjusted to take up the slack in the chain. i figured out how to adjust this. Need to know what lube you recommend? I was thinking a Motor Cycle chain lube, your thoughts?
any good brand of automotive grease- i used a red semi-synth grease and apply it to the hinges with my fingertips.
Excellent information and video, Ed
Thanks for the help.
Excellent, helpful video! Thank you !
Heh.... had some motorcycle chain lube left after doing maintenance, used it on the garage door hinges, works very well 👍
you could have used mazola, too.
Thank you. Very helpful.
I lubed basically all the same areas but used 3 in 1. Never saw any videos on doing this. It worked great but had plenty of drips on the cars for a few days. Don't care how long it lasts - house is a rental! But the grinding noises are gone and it works much smoother.
Thank you for your suggestion. I will give this a try today. Much appreciated.
WD 40 makes a silicone spray also. Would you recommend that one?
Excellent tutorial! Thank you! I never knew about this. With 3 doors, I've got my work cut out for me.
Glad it helped!
Great video. Thanks for sharing. 👍
Nice review, thanks
I *wondered* if lubing the torsion spring would be helpful, but I've never tried it. Thanks for the tip!
I do it twice a year, I think it mostly helps the springs from drying out, so they'll last a lot longer.
@@bjbhehir is it okay to use lithium lubricant/grease?
@@popaki9484what is the problems using grease? Now I thinking I should grease mine I believe the grease better the the liquid lubricant
It is important to know why the torsion spring needs a good quality lube regularly. The long spring is designed to spread the torque over the whole spring, so each coil takes its fair share of the load, and each coil only sees a small portion of the movement. If the spring gets dry some coils can stick together and not slide over each other, and this causes the portion of spring that is actually moving to actually have to move further and see more load. This uneven load is what causes springs to break.... So even if you do not lube anything else on the door, keep the spring lubed to even out the load along the spring. As Far as lubricants are concerned regular WD-40 should go into the 'adhesive' box, silicone lube does not dry out and does not attract dirt like WD-40 ( regular formula ) WD took over 3in1 company and their lubes improved, but before that they were a glue company.
@@chrissmith2114 Your explanation reminds me of plate tectonics, and the forces that cause earthquakes... :-) I used the same garage door lube as I did for the rails.
Great video! Clear & easy to understand. Thanks
Thank you for posting this helpful video
TY. Simple task, but important to do it all and do it right.
Great video thanks. Question, how often do you have to lube?
Didn't realize I needed to lube the springs themselves too. Thanks!
It is important to know why the torsion spring needs a good quality lube regularly. The long spring is designed to spread the torque over the whole spring, so each coil takes its fair share of the load, and each coil only sees a small portion of the movement. If the spring gets dry some coils can stick together and not slide over each other, and this causes the portion of spring that is actually moving to actually have to move further and see more load. This uneven load is what causes springs to break.... So even if you do not lube anything else on the door, keep the spring lubed to even out the load along the spring. As Far as lubricants are concerned regular WD-40 should go into the 'adhesive' box, silicone lube does not dry out and does not attract dirt like WD-40 ( regular formula ) WD took over 3in1 company and their lubes improved, but before that they were a glue company.
you don't- they just need to be kept clean and dry. if they have a coating of rust- anti-seize them with a brush- getting the stuff in between the coils.
Good video 👍
WOW, Mahalo I learned a great deal of saving money and anxiety!
Heritage Door, thanks for your enlightening video!
Not bad advice from a former mixer driver! I remember you in the truck. Way to go, kid!! - Joe Robinson, number 214.
;; hey I'm a Joe and my truck is #214 .... Small world ain't it
Hi Joe, that was a long long time ago. Its great to hear from you!!!
don't a lot of you guys keep a bucket of anti-seize on board?
I found that WD-40 makes dry silicone lube that has a strong pressurized nozzle that doesn't fly off to be really good. The pressure pushes a stream into the tight hinge cavities that normally can't get penetrated by other types I've tried.
Hey Ed, long time mechanical shop owner and res home builder here; found BG -IN FORCE long ago...U guy's GOTTA get U some of that! C a local auto shop @ buy-in a can. Great job!
Also look up my old f book pg..Alpha Omega Auto, Inc...Those 4 garage doors got lined w/in force every Spring AND are 48 yrs young!
BG makes some good stuff
Don't forget to take a wrench and gently tighten the bolts for the hinges that go into the garage door itself. They can loosen over time.
great video. very helpful. thank you
Short n sweet n very helpful. Thanks.
I also lube the overhead chain and wheels since there are small wheel bearings that will wear down without lubrication like on a car. Everything will run smoother and quieter !!!😊😊
Good advice, but I would also recommend at the same time re-tightening the nuts on the bolts which hold the hinges in place, especially on wooden doors. Between expansion and compression in the wood due to weather related changes, and normal loosening caused by constant usage, they tend to loosen up.
Very helpful! Thanks for sharing this.
How about the above door track and chain for garage door opener,
Very clearly demonstrated. Why not a lithium-based product for all the places that need lubrication, as recommended in other videos?
I tried using lithium grease and it wasn’t nearly as quiet as the lubricants in the video- even WD-40!
Hi, would you recommend some brands for lithium grease? Thanks!
No mention of the long screw gear or chain?
It is important to know why the torsion spring needs a good quality lube regularly. The long spring is designed to spread the torque over the whole spring, so each coil takes its fair share of the load, and each coil only sees a small portion of the movement. If the spring gets dry some coils can stick together and not slide over each other, and this causes the portion of spring that is actually moving to actually have to move further and see more load. This uneven load is what causes springs to break.... So even if you do not lube anything else on the door, keep the spring lubed to even out the load along the spring. As Far as lubricants are concerned regular WD-40 should go into the 'adhesive' box, silicone lube does not dry out and does not attract dirt like WD-40 ( regular formula ) WD took over 3in1 company and their lubes improved, but before that they were a glue company.
WD-40 is not a lubricant it is a cleaner.
@@IAMNOSLEEP no- there is a clue contained right in the name- WD. that stands for 'water dispersant'
I've used it as a metal & mechanical cleaner since very early 70's as well as a moisture dispersant in electrical components... Works great. Back in the day when it had fish oil in it we would use it is a lure attractant for fishing. @@tommurphy4307
@@tommurphy4307 TH-cam is deleting my replies if more than one sentence.
My garage door opener does not work inthe cold weather. Please see if you can suggest. I have replaced the battery, the problem is the same. Thanks
Where to buy the rubber on bottom of gararge😊
Thanks for the video but what about the rail in the center by the belt? needs oil or grease?
DON'T DO THAT- IT NEEDS THE FRICTION TO WORK PROPERLY
When I inquired about lubrication for the roller stems, I was directed to a white lithium grease spray by Blaster. I was also told this would be acceptable for the hinges, albeit a bit messier than the silicone sprays. Any opinions on that?
Thanks for sharing it. I'm wondering what lubricant to use in cold weather areas in the north of Canada. The temperature in the town I'm living in goes down to - 48 deg C most of the winter season.
has nothing to do with it- average relative humidity and how well the door is protected against rain and moisture is what matters.
Thanks for the reply.
Hi,how are you ,I have a double garage detached house , I had installed 2 garage doors in separated timing ( I believe almost 10 years apart, we only used the remote to open the garage Doors,we already forgot to use the security # to enter the garage from outside, we need to do that because sometime if anyone of the family members forgot to key for our main door, we can use the garage door to enter our house, the problem is since we almost never use to the garage door to enter the house, therefore we forgot the # to open it, therefore I need your advise of how to set a new # or retreat our old # ,please advise, best regards
Excellent job, very well done.
Nicely done. Very informative.
Thank you!
just curious, why you wouldn't recommend the WD 40 as lubricant?
Thank you. Very clear and well done
Nice video!😎
very educative. thank you
Very useful video, thank you.
Good info, thanks!
Should I lubricate any part of the motor itself chain or slide bar?
Is white lithium grease spray by CRC good to use for all the areas that need lubing up, as recommended in this video? Thanks for helpful replies.
Heritage is a great company. They installed my new doors. Professional and excellent service
Many see WD 40 as a miracle product. But using it on garage door components, it’s a great dust collector. Makes dust and debris gunk up the rollers and hinges. 3 in 1 garage door lubricant is my favorite. I worked at Loews and ironically WD40 was sold where garage door kits and components were staged. I mentioned to the store manager how WD was the worse stuff to use and it would be wise to replace it with the good stuff. Guess what? Never did it.
Good video. Thanks for sharing. I have a question... lithium vs silicon lube... I was told by the guy who replaced spring on my garage door to use lithium based spray lube whereas you have recommended silicon.
Requesting folks with knowledge on this to please share it with us. Thanks in advance.
I think silicon and lithium are both acceptable to use
Silicon is a lot cleaner, does not attract dirt and does not dry out
We cleaned our hands with WD-40 in the oilfield. It cuts grease great! No good for garage doors. Get a $10 tub of bearing grease and clean with WD-40 and re-apply as needed on the tracks. 👍
Thanks for the insight 👍🏾
Very nice. Thanks a lot. Do we not lube the drive chain? Thanks again.
Came here to see that. A strange omission.
I was told years ago to use beeswax in the track the wheels roll up and down in. It doesn’t collect dust and dirt like regular lubricants.
waste of beeswax and that stuff is pricey. the wheels have enclosed balls in them. putting lubricant or wax in the wheel tracks does nothing but wastes time and money.
Great Video! Maybe you can do one on the garage door operator and chain mechanism too.
I understand bearing. But when do you replace the wheels. I clean all the tracks and spray all the hinges and my wheels still making noise
I have one question and thank you for the video. You don’t suggest putting anything in the track where the wheels are nothing at all??
I sprayed garage door lubricant in the tracks and the wheels
Thank you for this utube
I never thought of this🤣