Best Harley & Cruiser Motorcycle Gloves
ฝัง
- เผยแพร่เมื่อ 9 ม.ค. 2025
- Harley-Davidson and cruiser motorcycle gloves product links and video timestamps:
0:08 - River Road Outlaw Vintage Gloves: OUT OF STOCK
1:08 - Icon Rimfire Gloves: frt9.co/2b8x4l
2:55 - Five California Gloves: frt9.co/13x5f1
3:53 - Five Urban Evo1 Waterproof Gloves: frt9.co/fl9qsw
Gear up for your next adventure at fortnine.ca:
frt9.co/98au9e
Connect with us:
/ fortnine
/ fortnine
/ fortninecanada
Product links and video timestamps:
1:08 - Icon Rimfire Gloves: frt9.co/2b8x4l
2:55 - Five California Gloves: frt9.co/13x5f1
3:53 - Five Urban Evo1 Waterproof Gloves: frt9.co/fl9qsw
@FortNine
You wasted my time with your #1 pick as I’m not interested in gloves that have no protection.
Your #5 pick while possibly good for cold wet weather really didn’t help me as I already have a similar glove that provides both cold/wet protection as well as armor with an internal water proof cuff and an outer protective cuff that allows any water that gets under my cold weather/wet weather jacket sleeves to drain out and away from my wrists!
I was hoping that you could steer me in the direction of a good hot weather glove that was light in construction and well designed with knuckle and finger armor panels, I did like your #2 pick with the exception of it’s obvious heavyweight construction!
If they offered that same protection product in another glove design, I might consider paying the price tag on such a glove!
I currently own a pair of Scorpion EXO gloves that are breathable, but I’d like them to breathe more freely!!!
They do have the knuckle and finger armor with strong impact/slide panels in the palm areas; so for my money, that’s the kind of glove I’m looking for(I still wish they offered more air flow through the glove)!!!
Only the Icon Rimfires are worth getting if you value your hands. There are many other short-cuff gloves that go with cruisers and that will protect the hands in an off. Look for palm sliders as well as sliders on the top of the hand. See what is the armor on the knuckles. What about the type of threading used to stitch the gloves? Reinforced outseams with full-length leather panel/s? I've seen plenty of cases of destroyed hands using shorties. You don't want to see what a hand looks like after crashing at 50 mph with cheap gloves.
Thank you for recommending the icon rimfire. I recently got a pair, and although there hasn’t been much riding yet this season, they are fantastic
Hey Ryan, I'm following your videos since long time now and wanted to say thank you. Very good tests and objectives advices! Thanks from France mate!
How well does the Rimfire D30 knuckle protection work when punching someone in the face?
Asking for a friend.
I enjoy all your reviews and other videos. Good job and please keep up the work. Love the "hockey glove" reference.
Tbh urban evo looks the best. Its not boring looking but has a timeless style like a good suit
I'm just curious. Have you ever looked into hatch gloves for a lightweight alternative? I know that they're more geared towards tactical use. But it seems that you don't mind looking into other options with similar functions such as abrasion resistance or flexibility. I figured that the materials and design of some of their gloves might be worth looking at. I've used the hatch operator gauntlet gloves more often than not, for almost a decade of driving and work. But some of their hard knuckled gloves might be worth your time. The ones that I bought are exceedingly comfortable, and remain in good shape.
Dat brick wall wallpaper haha, looks good with the yellowish downlights
Im curently using Dainese X-Run gloves to ride my Iron883 (yes I traded my GSR750 for a Harley LOL) and they work great so far.
The hitching on the palm for this model of Icon is really not resistant but the rest is some good quality.
Your probably thinking of mad max 1 with the icon gloves. The ones they use are very similar.
As always, your reviews are appreciated. However, what would you recommend for winter cruiser riding gloves that's really not going to freeze your hands... and also not wired? I have bought good name brands that are price ranged from $35 to $115 but they're disappointing. My wife is starting to think I am into collecting gloves. What features do I need to look for (thinsulate, gore-tex, etc.)? I can also use something that you might have already reviewed but have nor seen it yet... one that would not hurt my pockets too would be nice. Thank you so much.... looking forward to your U.S. market. Do it before someone builds a wall :)
Hey Pablo! Look for a manufacturer that also plays in the snowmobile world... they tend to do warm gloves better than anyone. Scott comes to mind, and their Priority GT glove (fortnine.ca/en/scott-priority-gt-gloves) will look good on your cruiser. It has Gore-Tex, thinsulate and a fleece lining... all good things to look for. There are some non-Gore-Tex gloves that are even cheaper, but if you ride in the rain a lot, I'd go with Gore-Tex as it's the only thing that doesn't start leaking over time. Hope that helps! ~RyanF9
@Paul H.
This may be 5yrs too late but I bought a pair of Scorpion EXO TEMPEST gauntlet gloves last fall specifically for winter weather riding.
They have two cuffs, the inside cuff is fully waterproof with an elastic gather and an outer cuff that is also waterproof, but it allows for any water that could get past the sleeves of your jacket to drain out away from your wrists!
They are only insulated on the back of the glove/hand and work best with heated grips!!!
And boy do they work well with the heated grips!!!
@@AzzKicker-bz1cb - thanks!
Not renewing Odin gloves? Pretty sure they are made in Canada too!
I use the oakley si assault gloves... very breathable decent protection on the top and flexible, though the palm is too thin, the icon pursuits are nice as well but don't last long for the price. any one else?
wait wait wait. in another video, you were hating on D30 in gloves...
Silly question but I've been trying like crazy to find a pair of gloves with rubber on the fingers if you look at the ones that Mel Gibson wears in the old Mad Max movie and I had some as a kid I would really like to find some of these maybe you can help me if not thanks for taking the time to at least read this message
Great video, wish I'd seen it before I bought a pair of crappy leather gloves.
I'll probably upgrade though.
One of my favorite gloves is to use Baseball gloves.
New motovlogger here. Ride safe bro
Icon Rimfire. What a name! Just what I get after a hot curry.
We need a update bro
We want 2023 version of it.
I am curious what Brad pitt wears looks like one from home hardware
Lee Parks Sumo R?????????? Best gloves you can buy.
fortnine open up a shop in hamilton Ontario lol
Any views on Grifter and Motostuka goves?
There are so many better membranes out there than GoreTex, they just market and license well.
Any of them touch screen compatible?
53rd, also why so few comments here
Your two reviews of the Outlaw have conflicting comments on the leather thickness... Your best gloves under $50 video says its made with thick leather while this vid says its thin leather. I can testify that the leather is thin. Somehow I missed this video and only saw the other. I was a little disappointing when I received the outlaw, the leather is very thin. I am a little nervous about going for a slid in them. Additional, they have a weird cut, they are tight in across the knuckles but loos at the wrist. This is causing the seams to split only after 4K miles. But damn... they look good!
moto stuka shanks gloves... thats the real shit
Anything with a Harley Logo is made in China or Indonesia.
You prob have hairy palms Ryan!
D30 is hardly premium, its pretty shite compared to hard armour, ive got it in my expensive Bell-staff and Rukka jackets but its pretty shite compared to standard Alpinestars hard armour
SAS-TEC is the bees knees.
Guacamole?
First pair looks like fetish gear.
Second pair looks like they would be tucked in the belt of the construction worker in the Village People.
Third pair looks like goalkeeper's gloves.
Fourth pair looks like gloves a cookiecutter female spy would wear in a cliche movie.
I have a weakness for stylish gloves...
Heat them up in the oven and wear them to break them in faster
I might be out on a limb here but I'll bet you're not really a cruiser guy :)
Who else has sun tan dark spot on yourwrist?
this video should have been called a collection of the most ugly cruiser gloves available, i have a cruiser it’s only a 125 but i wouldn’t be seen dead in any of those😂
wtf bareknuckles!?!?!?? steel in the palm to scratch my tank with?!!!?!? who tf designs this $%^#
D3o in the knuckle (which becomes rigid upon impact) and the multiple/ miniature steel "pucks" act as tiny sliders. It's not that weird if you think about it. I'd rather have a palm slider than a knuckle if I go down bc it minimizes the force going thru your wrists.
@@samueljlarson with the bare knuckles stuff, he ment the first glove
Harley riders don't need nuffin' getting between them and the wind. Not even skin... lulz lulz lulz
Very bad this glow
ok, u picked shitty gloves, wtf! Show us great gloves. Grrrr. u owe me the time I spent watching this video back. lol
DSM Dallas How are all of these shit?
USELESS not a single safe glove with armor or alike. WTF. FAIL bro. If we wanted to compare cheap gloves vs cheap gloves we would just shop at Harbor Freight. Where are the real armor or kevlar crash-safe cruiser gloves with style?
Really?This kid is 13 year old!lol