TAMIYA - My TZ/TZX Prostock Build

Here I reveal the most. Though I feel that I have missed some important details, like:
-speed
-battery for every motor
Looks like we will be having a part 2.
But for now I will be preparing for the Playground EX race.
Follow and subscribe
IG Link - ...
TH-cam channel link - / @mickhailhong-balinas4021
Facebook page-
www.facebook.c...
#tamiya #raceday #mini4wd #philippines #bacolodcity

[@JBSB]

Lods, I just noticed one thing, the Indo setup is not allowed at ProStock PH, The only chassis that are allowed to have a 4 rollers setup to the rear or tail are AR, MA, and VZ chassis aside from these chassis every other chassis is not allowed to have a 4 rollers setup if you are going to race on a ProStock race, but maybe in Bacolod they set it as a house rules I might be wrong though.

[@MHBtamiya]

Thanks for the feedback po sir, though it is not just a house rule anymore po. But as mentioned in video, it is followed by nearly all racing centers in the Visayas Region and in some parts of Luzon as well. Since it is a win-win setting for all racers, sellers and organizers.
It benefits everyone in a sense, that it makes practical sense. It's like asking "bakit allowed ang DPR to other chassis? While only the the Premium VS chassis (e.g. Saint Dragon) has the DPR on them." or "bakit may 'Stock' sa ProStock kung hindi naman stock settings ang gagamtin?" 😅
I hope it will help. Since we are spreading awareness din na we can enjoy the hobby of ours in tandem with logic and dynamic progression.

[@JBSB]

@@MHBtamiya Need ko siguro i-rewatch ung video baka mali ako sa pag kaka dinig baka kako ProStock PH ung nasa isip ko pero hnd ProStock PH ung nabanggit niyo po :) sa ProStock PH po kasi may rules, pero siguro kung ProStock Visayas or ProStock Mindanao mas mainam para hnd mag kalituhan kasi po kapag ung nakapanuod tiga Luzon tapos nasunod sa setup on the video at lumaro sa GP kawawa po kapag na DQ lalo kapag umabot sa quarter finals, baka po mali ung pag kaka unawa ko sa nabanggit baka hnd po ProStock PH ung nabanggit ninyo sa video :)
Thanks po ulit sa pag explain na overlooked ko po ung part na for Visaya's region nag kamali ako akala ko po kasi ProStock PH ☺

[@MHBtamiya]

@@JBSB Na e discuss na din po yan sir in video with regards specifically where it is allowed and not allowed. Kasi knowledge and awareness is everything sa hobby na eto. No room mag assume kasi mahirap na mahiya ang racers natin. At the the same time nag iinspect kami from start to finish not only lang sa quarter finals to ensure fairness to all.
Let’s say I have this video to jump start our new racers towards sa podium finishes if need be. Hehe 😉

[@Luther_One]

Now I’m confused which one to built for stock

[@Jajaninya]

good day po. nice set up po. gusto ko po ei try. pero di ko sure kung pwede ang indo set up po samin. ano po usually battery voltage gamit nyo sa motors..

[@MHBtamiya]

So far po this are the racing centers na accepted ang indo set up:
Cavite
Bacolod city
Dumaguete city
Cebu
CDO
Davao*TBC
For batts voltage po.
4.2:1 and 5:1 power dash / Sprint Dash = 1.48V | 27-29kmh sa speed checker
4.2:1 / 4:1 hyper dash 3 = Full batts and starting with fresh charged batts po na above 1.5v sa checker | 26-29kmh sa speed checker (medyo adjust2x lng sa 1.45v-1.48v minsan, depende sa hyperdash 3 nyo po, kasi malakas ang torque ng hyper 3)
3.5:1 Hyper dash 2/light dash/atomic 2 = Full batts and starting with fresh charged batts po na above 1.5v sa checker | 27-30kmh sa speed checker

[@Jajaninya]

@@MHBtamiya nice po. sobrang bilis po nyan. pwede kaya to sa technical track? yan pa kasi dito samin from south cotabato po ako. maraming salamat

[@MHBtamiya]

@@Jajaninya if naka banda breaks po kaya nyan hangang jetdash po pasok sa technical. (Yellow banda) Kasi noon na may technical races kami and allowed ang banda. Meron mga racers gumagamit ng banda na jetdash ang laman. Kaya na ban ang banda breaks dito samin 😁

[@exxonjohnmendoza757]

Sir asking lang po. D ba sasabit sa tracks yung side wing ng tz? Sa inner po ba kayu naglalagay ng rollers o sa outer screw hole?

[@MHBtamiya]

@@exxonjohnmendoza757 Walang sabit sa wing po, and yes inner whole so that mag stick sa wall and quicker sa turns.

[@MarcoSantos-k6l]

Have u ever tried using a barrel roller on the indo set up instead of tge dpr? Since your dt setting is just so all corners of the dpr hit the wall together

[@MHBtamiya]

@@MarcoSantos-k6l not that effective. It wiggles a lot and can’t go up as well. The barrel roller only gives the illusion that all surface makes contact but in fact only the base is making 90% contact of the time.

[@bagasridho4443]

Ayo balapan tamiya di indonesia, balapan pro stock/stb murni 😊

[@jhecvillanueva7936]

Ilang cars po ang entry mo sa prostock with tzx build? Thanks

[@MHBtamiya]

When video was posted 17 of 18 units were all tzx. As of today 17 tzx units, 6 tz and 3 xx units po.

[@jhecvillanueva7936]

As a newbie, AR is always the recommendation I am getting. So why TZX instead of AR? Thanks🫶🏼

[@MHBtamiya]

@@jhecvillanueva7936 depends on the racing center talaga po. Kasi dito sa Visayas, we follow the international format ng Prostock. Kaya if allowed ang Indo tail sa racing center niyo po, then you can save a lot sa old chassis like tz, X or VS with this build.

[@jhecvillanueva7936]

Salamat po sa masipag na pag sagot🫶🏼🙏🏻 more power and more trophy

[@stefanhnavetsea1588]

thanks for making these videos in english so international viewers from neighboring country can understand them while multi tasking, cheers

[@dondeepiccio4072]

Good morning sir, I'm also a Super TZ-X chassis racer on prostock category. What I love the most if this chassis is it's transmission.

[@GabrielYourTechGuy]

sir anung tawag sa roller nyo sa likod yung may oring?

[@MHBtamiya]

16mm stock plastic rollers po. Mostly galing sa mga x chassis kit.

[@GabrielYourTechGuy]

@@MHBtamiya thank you sir sa reply po... mag build po sana ako nito... since very dominant sya sa tech categ also

[@GabrielYourTechGuy]

@@MHBtamiya any tips sir start ako sa tech categ.. ty in advance po

[@MHBtamiya]

@@GabrielYourTechGuy sa tech kasi the same set up lahat. And mostly may edge if all tam, then 2x5 both front back, and The only advantage is the decissions you'll make during the race. (Downgrade ng Oring from yellow to green etc.)

[@kimiar8709]

Can please make sa vlog how hard the power tire vs. the white hard wide tires??

[@angelo-vq1jh]

Good day po ok din po ba sa pro stock ang MS chassis? Balak ko po kasi bumili pang pro stock salamat po

[@louiebanal6421]

Hello po. Saan po makaka bili nung red and white tires mo? Thanks

[@eunelaguilar6773]

sir new subscriber po at newbie po sa pag tatamiya, sir ano po Ang magandang kit na ipang laban sa boxstock? salamat po at sana mapansin mo Tanong ko po.

[@iandexterilao6830]

Do one for the super x build

[@emverramos718]

sir fb mo po?

[@ruangtiedye]

Jooooz

[@orgennegro403]

🤣😂😂

[@iangopiteo3281]

Good day sir,just asking...why DPR installed @ tha back of your tamiya unit?

[@MHBtamiya]

Good question sir, DPR is at the back instead upfront since it will serve a stabilizer and will absorb the impact on the turns. Compared to having a stiffer build with having just a regular 13mm on top and a 16mm below. And we are limited to just 2 sets of rollers with Orings.

[@iangopiteo3281]

Do you know how to speak filipino language sir?

[@MHBtamiya]

@@iangopiteo3281 yes sir. 😄

[@iangopiteo3281]

Gdevning,newbie kasi ako sa ganitong laro...naka try na ako sumali sa fun race ng grupo nmin...PRO STOCK CATEGORY po ang sinalihan ko...halos ang set-up nila DPR ang nasa harap then 16mm/13mm rollers ang nasa likoran...

[@MHBtamiya]

Some racing centre’s kasi hindi allowed ang indo set up, except dito sa Visayas and as of last week sa Cavite, allowed na ang indo set up. It is much cheaper kasi if indo set up, kasi you can use ang tz,tzx,vs,x or xx chassis for it. This are the staple chassis for a simple and stable set up katulad ng FM.