How to Install Baja Designs Squadron Sports on Trigger 4 Plus Controller
ฝัง
- เผยแพร่เมื่อ 8 ก.ค. 2021
- We have been getting asked a lot about how to install Baja Designs lights on a TriggerController, so now we have your answer! We got our hands on some Squadron Sports. We installed them on a Trigger 4 Plus Controller. The same install applies to the Trigger 6 Shooter as well. We have to do a small amount of wire stripping and such but don't fret it's pretty easy and we'll show you how.
👉 What you need
------------------------------------------
►Needle Nose Plyers,
►Wire Strippers,
►BajaDesigs Squadron Sport, LED Driving/Combo:
bit.ly/SquadronSportCombo
►Trigger 4 Plus Controller:
Bit.ly/Trigger4plus
or
►Trigger 6 Shooter Controller
Bit.ly/Trigger6Shooter
►Trigger Short Y Harness
bit.ly/ShortYHarness
Trigger ACS Plus App(Android):
►bit.ly/TriggerACSPLUSGooglePlay
Trigger ACS Plus App(iPhone)
►apple.co/3ahU5o4
★★★Follow us on Instagram★★★
►Bit.ly/BajaDesignsInstagram
►Bit.ly/TriggerControllerInsta... - ยานยนต์และพาหนะ
Can I run 4 lights into one switch? I have 4 Baja Designs S1's and would like them on one switch. I was planning on just soldering all the wires and bypassing all the plugs then running a single positive and negative to the end of Trigger cable
Sorry for the late reply. Yes! as long as they are under the AMP on that switch!
Do you have a video for installing Baja designs lp9
Unfortunately we don't. But it shouldn't be too different from this video or the How to Wire DRL Lights video.