Matrix 9 to MatrixGold conversion Loft and Curve Network commands Basic Understanding
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- In this video we will look at the slight differences between the Loft command and the Curve Network command. At the end there is a little addition information on the loft command for a better understanding.
If you are just starting out in 3D printing, I would recommend going with one of these printers at a low cost and get familiar with the printing and adding supports and then maybe level up to a faster and higher priced printer. Keep your cost low to start until you become familiar with everything that 3D printing has to offer.
Anycubic Printers and resins:
shareasale.com...
discount code: www.shareasale...
Elegoo satrun 3D printer from Amazon n amzn.to/41CgeDU
Jewelry Casting flasks amzn.to/3tnCQvq
Vacuum Casting Machines from Amazon amzn.to/48b5KxH
Elegoo wash and Cure station amzn.to/47dOOWg
Other videos that may be useful:
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
• MatrixGold Add a unde...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
/ @donsjewelrymakingandj...
@donsjewelrymakingandjapantrave
#jewellery #jewelry #jewellerydesign #3drendering #jewelrydesigner #designer #customjewelry #finejewelry #howtomakejewelry #howtodesignjewelry #howto #caddesign ##3dprintingdesign
#3dshoftware #howtodesignjewelry #cadtutorials #3dtutorial #howtomakejewelrytutorial #jewelrymakingtools #highfashionjewelry
Thank you. Hoping to see if one of the video’s explain how to use curve network in a ring. I struggle with that
I think there are a few gents' rings that I kind of show that one but a really good idea to go back and show it in one video by itself. Thanks for the suggestion. I will try to add some content on that in the near future. Really appreciate it.
Hi.thanks.excellent
You are more than welcome. Glad you liked it. Hope it helps. Thanks for the comment and support.
this is great
Thanks! Hope it helps. Thanks for the comment and the support. Really appreciate it.
Hi, how do you put those figures on the grid, that’s what I need to learn
Check out the content on curves and degrees. It may help.