Great job on the video. Clear answers to questions from those who viewed. Integrating the Freedom Sticks into my Airstream Bridge set up using the D Fi Hub. Only using 8 channel mode on the Freedom Sticks now and just the app from the ADJ Bridge. May try the 50 channel mode. Thanks
Great video! Just ordered the freedom sticks I have my dmx go and utilize an off brand dongle Chauvet won't communicate with something other than the Chauvet hub correct?
You always need something to broadcast D-Fi to the Freedom H1. The LR512 cannot transmit wireless DMX to any fixtures. In this video I was using the D-Fi USB in a Gobo Zoom to broadcast D-Fi to Freedom Sticks. You could use the same setup to send wireless DMX to Freedom H1.
There are eight RGB patterns (chases) pre-programmed within Light Rider and each one has a number of variations (speed, size, shift/phase, etc) but that's it. You decide the colours. You cannot individually map pixel though - it's not designed to work like that. Light Rider is a simple plug-and-play DMX app - if you want individual pixel mapping or to be able to design your own scenes and chases then you'll need to go to a full laptop-based software solution.
Great job on the video. Clear answers to questions from those who viewed. Integrating the Freedom Sticks into my Airstream Bridge set up using the D Fi Hub. Only using 8 channel mode on the Freedom Sticks now and just the app from the ADJ Bridge. May try the 50 channel mode. Thanks
Great video! Just ordered the freedom sticks
I have my dmx go and utilize an off brand dongle
Chauvet won't communicate with something other than the Chauvet hub correct?
Hi Martin. Really good videos and tips. I have an involved question re controlling the freedom sticks via the MDG. What’s the best way to contact you?
No worries. Post a message in the Facebook group and we can take it from there.
Can you do the same with some Freedom H1, you only need the LR512 without any D-Fi hub ?
You always need something to broadcast D-Fi to the Freedom H1. The LR512 cannot transmit wireless DMX to any fixtures. In this video I was using the D-Fi USB in a Gobo Zoom to broadcast D-Fi to Freedom Sticks. You could use the same setup to send wireless DMX to Freedom H1.
Thanks for the answer :)
how much programmatic control do you have over the individual leds in each freedom stick?
There are eight RGB patterns (chases) pre-programmed within Light Rider and each one has a number of variations (speed, size, shift/phase, etc) but that's it. You decide the colours. You cannot individually map pixel though - it's not designed to work like that. Light Rider is a simple plug-and-play DMX app - if you want individual pixel mapping or to be able to design your own scenes and chases then you'll need to go to a full laptop-based software solution.
Light Rider Tips thank you.
What are your settings on the Freedom sticks to make it work with the app?
They're just set up as DMX receivers in 50ch mode with each stick on its own DMX address.
Hi martin are you still replying to this post
Sure. I've seen your message or feel free to join the Light Rider/mydmx Go Help and Support Group on Facebook for more help.