The grub screw is usually locked with a punch mark. Or you can use Loctite on it. If it comes loose no oil will go into crank. My three B44 can't have the sump plate with drain plug. Skid plate under engine don't give enough space. But the B40WD has one. When fitting outer cover, make sure that the small ball bearing in clutch mechanism is in place. Some grease will help.
Thanks so much for dropping some insight into the BSA world Mike! I still have to find a stock skid plate for this bike to see if it'll fit or not. My other 441 has the stock sump plate and skid plate.
The grub screw is usually locked with a punch mark. Or you can use Loctite on it. If it comes loose no oil will go into crank.
My three B44 can't have the sump plate with drain plug. Skid plate under engine don't give enough space. But the B40WD has one.
When fitting outer cover, make sure that the small ball bearing in clutch mechanism is in place. Some grease will help.
Thanks so much for dropping some insight into the BSA world Mike! I still have to find a stock skid plate for this bike to see if it'll fit or not. My other 441 has the stock sump plate and skid plate.
Great video very helpful
I’m glad you liked it!
👍