Thanks for these, Dom! Been trying to figure out my Montage for months now, and I finally have some time to spend with it over the next couple of weeks. I'm sure I'll think of something else I need help with :-)
Very informative, thanks you! But what if a have a drum track with multiple drum sounds, or kicks, and I want only the sidechain from a specific kick only, not from the whole drum track? Is this possible?
Hi Dom, is there any way to side chain with a minus delay? Means the bass/pad/etc starts to duck prior the kick For sure it possible to make a copy of the bass drum and give it a -delay. But that's not efficient on changing notes. Perhaps something for the 1 minute video?!
Well explained; especially fine slowly for old men like me😉 I will try it in my next project. Addition: I experimented a few hours with compression-pumping (Alan Walker - Faded). Sounds very bad on my MODX. The worst thing is the "snapping" sound it makes. The trials with different parameters does also not function well. Everything is much worse than in this video; perhaps because of my saw-sound. Can't imagine to ever use it. Costs much nerves. It's better and easier with Envelope Follower.
As i understand the sidechain is triggerd with the Mastereffect. So all parts o the performance are member of this sidechaining. How could i exclude some parts of the multipartperformance from being sidechained?
Thank you sooo much Dom. You have been soo informative. I have been trying to figure out this. I just one question isn't side chaining and envelope follower the same thing? Coz this video seems same as one of your previous video. And please can you make a video about explaing exactly the difference between Envelope follower, motion sequencer,.
Hey Gabriel, absolutely you can sidechain from any live source! At 4:26 you can see exactly how it works ;) Not only you can sidechain from a drummer or bassist but you can control how much sidechain you apply to your signal by turning the gain knob on your A/D input ;)
Amazing video brother love your work on the keyboards! Please can you advice on the output of the keyboard I mean do you use balanced cable or stereo cable to get that output? Thanks a lot buddy!
Hi Mauwin! You can use both unbalanced or balanced cables. I always use balanced cables (TRS) so that I get the clearest and loudest signal possible. You also avoid any noise or interference with balanced cables as they cancel the noise out. Montage has balanced outputs (Pure Analogue Circuit) so I would always use balanced if you have an audio interface that has balanced inputs. :)
Hey Don, Is it possible to edit the preset rhythm patterns. Sometimes I just want to use the kick and hi hat or the kick only, from the preset rhythm track.
Terry Ro I‘m quite new to the MODX, but I think you can isolate specific drum instruments by adjusting the key range. Turn the pattern off and locate your desired instrument by manual drumming, and then limit the key range accordingly.
Hello Dom! How to sidechain live kick drum with the montage? Do I have to buy a microphone to connect on kick drum? or can you get that signal through the mixer where the drum kick channel is controlled?
Hi Mauwin, There are quite a few ways. The easiest would be to get a feed from the kick drum from the mixer (through an auxiliary send for example) and drive it through the Montage A/D Input :)
Hi Dom how's you doing buddy? I have been doing some songs where I have to use layer or splits for more than 8 parts! I wanted to know that I have seen in the mixer there are 16 parts so I tried to add a tone on 9th part but 1-8 part doesn't play! So for what are 9-16 section is used?
Mauwin Fernandes you can use them for sequencing in a DAW like Cubase. On Montage you can play up to 8 sounds simultaneously, if you tried more the polyphony would be exhausted ;)
Hey Oteko, you just need a normal jack to jack cable from your mixer . Then you can setup the level using your Gain knob. Just don't go too hot into the Montage or the sidechain won't work as it should :)
I take the two outputs from the Montage, then connect it to the UR44 audio interface and record everything into Cubase, it would be the same procedure with Logic :)
Hey, i have montage aswell i was wondering how can i play breaks of drum ? I was making a cover with cubase of Birdland and i wanted to put a fast break of drum but idk how to do it can you explain me ? Ty :)
Hi, Do you want to play the breaks in realtime? Or using an Arpeggio? If you don't want to play them then you can assign an arpeggio and just hit the Arpeggio on button :) All drum sounds in the montage come with pre-configured arpeggios so if you turn the Arp on then you can press the scene buttons to change the patterns ;)
@@lumer2b Most of the broadcast chains I worked on were on music format stations. It sounds terrible with music. Yet, I am encountering it in recordings now. Just awful. I'm encountering this and severe clipping on pop music recordings, and zero attack, zero decay compression so fast it generates dissonant harmonics, on symphonic music. It's extremely disappointing.
Almost 6 years after its publication, this video helps me to progress in the understanding of my MODX7. THANKS! 😄
If it was "easy" and intuitive, we would not need this video.
Everything is easy only once you know.
Many thanks
He never said it was easy. He said it was simple.
At 1.34s he actually says its very easy to do.
@@namenaim1560 Okay, I take it back! As you say, once you know, it's both easy and simple.
You make my MODX much easier to understand. Thanks for this one, I was struggling a little to get this using only the manual.
Thanks for these, Dom! Been trying to figure out my Montage for months now, and I finally have some time to spend with it over the next couple of weeks. I'm sure I'll think of something else I need help with :-)
Very informative, thanks you! But what if a have a drum track with multiple drum sounds, or kicks, and I want only the sidechain from a specific kick only, not from the whole drum track? Is this possible?
Thank you very much. Easy to understand now with your help!!
Hi Dom, is there any way to side chain with a minus delay? Means the
bass/pad/etc starts to duck prior the kick For sure it possible to make a
copy of the bass drum and give it a -delay. But that's not efficient
on changing notes. Perhaps something for the 1 minute
video?!
As always, you are fountain of knowledge mate :). Thank you.
Thanks! It was really helpful, but I still have one question. How do you make a sidechain only for one part? I tried to do it but I couldn’t.
Can you also set that the music does not follow the kick drum, but another instrument of the drum set?
Always wondered how this was done on house tracks. Away to try it myself. Thanks man 😁
Well explained; especially fine slowly for old men like me😉 I will try it in my next project. Addition: I experimented a few hours with compression-pumping (Alan Walker - Faded). Sounds very bad on my MODX. The worst thing is the "snapping" sound it makes. The trials with different parameters does also not function well. Everything is much worse than in this video; perhaps because of my saw-sound. Can't imagine to ever use it. Costs much nerves. It's better and easier with Envelope Follower.
As i understand the sidechain is triggerd with the Mastereffect. So all parts o the performance are member of this sidechaining. How could i exclude some parts of the multipartperformance from being sidechained?
Could you explain the slice effect ? what can we do whit it?
Thank you sooo much Dom. You have been soo informative. I have been trying to figure out this. I just one question isn't side chaining and envelope follower the same thing? Coz this video seems same as one of your previous video. And please can you make a video about explaing exactly the difference between Envelope follower, motion sequencer,.
another great demo, thanks
I find side chain and enveloppe follower produce same kind of effect, don't you think ?
Can you sidechain from a live instrument? I'msaving up for a Montage and may want to sidechain from my drummer or bassist. Would that work?
Hey Gabriel, absolutely you can sidechain from any live source!
At 4:26 you can see exactly how it works ;) Not only you can sidechain from a drummer or bassist but you can control how much sidechain you apply to your signal by turning the gain knob on your A/D input ;)
Thank you for your fast response.
It is possible to contol the sidechain via a footswitch like the Krome Ex does?
thank you, your videos always help me how know to use the montage great videos.
Amazing video brother love your work on the keyboards! Please can you advice on the output of the keyboard I mean do you use balanced cable or stereo cable to get that output? Thanks a lot buddy!
Hi Mauwin! You can use both unbalanced or balanced cables. I always use balanced cables (TRS) so that I get the clearest and loudest signal possible. You also avoid any noise or interference with balanced cables as they cancel the noise out. Montage has balanced outputs (Pure Analogue Circuit) so I would always use balanced if you have an audio interface that has balanced inputs. :)
Thanks buddy already bought the cables
Hi Dom! Can you make a video of motion controller showing how to put it into use and even FM synthesis you can make out of init patch! Thanks
Hi Dom, Thanks for this useful video !
Glad you liked it :)
Thanks, Dom. Very helpful. :)
Hey Don, Is it possible to edit the preset rhythm patterns. Sometimes I just want to use the kick and hi hat or the kick only, from the preset rhythm track.
Terry Ro I‘m quite new to the MODX, but I think you can isolate specific drum instruments by adjusting the key range. Turn the pattern off and locate your desired instrument by manual drumming, and then limit the key range accordingly.
Hello Dom! How to sidechain live kick drum with the montage? Do I have to buy a microphone to connect on kick drum? or can you get that signal through the mixer where the drum kick channel is controlled?
One more question how to sync the arpeggios live with the drums? Thanks
Hi Mauwin,
There are quite a few ways. The easiest would be to get a feed from the kick drum from the mixer (through an auxiliary send for example) and drive it through the Montage A/D Input :)
thanks a lot Bro
Please show us how to do a riser
The thing with these synths is it can drag you into working out what's going on more than actually playing music.
Hi Dom how's you doing buddy? I have been doing some songs where I have to use layer or splits for more than 8 parts! I wanted to know that I have seen in the mixer there are 16 parts so I tried to add a tone on 9th part but 1-8 part doesn't play! So for what are 9-16 section is used?
Mauwin Fernandes you can use them for sequencing in a DAW like Cubase. On Montage you can play up to 8 sounds simultaneously, if you tried more the polyphony would be exhausted ;)
Dom Sigalas Music can you please elaborate? I mean like how to do that?
Well done Dom, thank you ;)
Nice, so what cable do I need if I am sidechaining a live drummer?
Hey Oteko, you just need a normal jack to jack cable from your mixer . Then you can setup the level using your Gain knob. Just don't go too hot into the Montage or the sidechain won't work as it should :)
Thanks Dom very informative!!!
Cheers George :)
Really nice video. How do you connect the Montage directly into your video?
Hey thanks! I connect it straight to my Steinberg UR44 audio interface :)
Sorry I'm very new. You connect a stereo output from the Montage into the AI and then is it a USB out from the AI into Logic? Thanks.
I take the two outputs from the Montage, then connect it to the UR44 audio interface and record everything into Cubase, it would be the same procedure with Logic :)
Hey, i have montage aswell i was wondering how can i play breaks of drum ?
I was making a cover with cubase of Birdland and i wanted to put a fast break of drum but idk how to do it can you explain me ?
Ty :)
Hi, Do you want to play the breaks in realtime? Or using an Arpeggio? If you don't want to play them then you can assign an arpeggio and just hit the Arpeggio on button :) All drum sounds in the montage come with pre-configured arpeggios so if you turn the Arp on then you can press the scene buttons to change the patterns ;)
I want to play it in real time like the yamaha clavinova
What I do is I select a drum kit from the Drums Category and just start playing :) Also if you want you can sequence a beat in Cubase
Hi Dom! How to sync the arpeggios with the drums?
Hi Mauwin :) Check this video at 10:50, I explain the procedure :) th-cam.com/video/zmZzK3dIP6A/w-d-xo.html
Dom Sigalas Music Thanks Bro I got it
Is this something you could do also with MOTION SEQ?
Yes you could essentially :)
👍👍👍 Great!!! 😘
For decades broadcast engineers worked to eliminate this pumping effect in broadcast limiters. Now its suddenly desired sound.
Not the same context at all, this can sound nice in dance music, but not at all when hearing the news.
@@lumer2b Most of the broadcast chains I worked on were on music format stations. It sounds terrible with music. Yet, I am encountering it in recordings now. Just awful.
I'm encountering this and severe clipping on pop music recordings, and zero attack, zero decay compression so fast it generates dissonant harmonics, on symphonic music. It's extremely disappointing.
в гугл переводчике слово impress имеет 22 понятия. что у вас за язык? даже слова жадничаете.