Replace Nintendo Switch Broken LCD Digitizer and or Scratched Touch Screen. Complete.
ฝัง
- เผยแพร่เมื่อ 5 ส.ค. 2024
- Hello,
This video is a guide that will show you how to replace the Nintendo Switch LCD and touch screen. This video shows multiple repairs that can be done, whether you have a broken LCD or Touch screen, or if you would like to replace a scratched touch screen then this video will help you through the process.
Tools needed:
-tri wing screwdriver for Nintendo
-00 size Phillips screwdriver
-plastic pry tool
-metal pry tool
-replacement parts (LCD or Touchscreen, or both)
Links:
Tools:
amzn.to/3j8nqln
amzn.to/3ykQBIj
Digitizer:
amzn.to/2WBJahT
LCD Screen:
amzn.to/3fhkQIu
Please remember to like and subscribe, Thank you for watching!
***Disclaimer: This video is not sponsored. I use affiliate links. As a customer, you do not pay any more or less because of an affiliated link. A small percentage of the sale will go to the person who generated the link. Thank you for supporting my channel and helping me grow.
![[ไฮไลต์] แบดมินตันชาย SHI Yu Qi (จีน) vs วิว กุลวุฒิ (ไทย) รอบ 8 คน | โอลิมปิก 2024](http://i.ytimg.com/vi/f7z7taforOM/mqdefault.jpg)
just got done thank you so much. I was completely terrified when I realized I would have to take almost all of it apart to replace the LCD, but this video made it easy as can be. my switch is back to normal thanks to you! I'll make sure not to leave it anywhere near my little brother from now on thanks alot!
what happened to your switch? mine works fine but there’s a massive visual crack on the screen
Thank you for this! I was able to switch out the broken digitizer, and the screen out with ease. I had to disassemble it again the next day, because I forgot to take the films off of the digitizer 🙃🙃 but shoot, I did it in under an hour after remembering how to do it from this! Thanks again, you saved me literally $120 from having to have someone else repair this. Best $60 I spent in years for the kit, replacements and screen protector 🌟👏
Nice I love how you get right to the point in this video. No intro or anything like that.
Everyone tells me I'm so good at working on electronics. I'm only as good as the TH-cam videos I watch. Thank you for this video my nice is so happy she has a new screen and joycon sticks that don't drift. If I could like this video 1000 times I would
Followed every step and it worked perfectly, thank you!
Nintendo sure doesn't make this easy. I remember taking apart my PSP a lot because dust would find its way between the LCD screen and the glass on top. So I'd get little particles of dust blocking what I am seeing. It was a lot easier than taking apart a Switch. Kudos to you. Good video too.
Ye I reshelled my gameboy advance sp and replaced the screen cover. It was hella easy on that compared to switch
I came here solely to see if I can power on the device without the heatsink attached (I only had to replace a digitizer) and thankfully I saw that I could. I saw other repair videos where they put it all back together without testing it first.
Just an FYI, you don't have to remove the motherboard in order to replace the digitizer; I don't think you have to do that to replace the LCD either, as it's loose in there, but it's good practice for working on small tablets.
WAY more involved than it should be. I would recommend very few people try to do this on their own. I bought a replacement digitizer and after watching this I don't want to do it. Guess I should have watched the video completely before buying a replacement. Daughter will be disappointed, so I suppose I will have to try. This coming from a guy who has built computers and worked in IT for 25 years. I am too old for this...
Did you do it? It’s not as hard as the video makes out as the motherboard can stay in along with the heatsink and fan but while you’re in there it’s good practice to change the thermal paste.
I was traveling and my dumbass put the charger in the same backpack pocket as my switch and there was a deep and long scratch on the screen, thank you so much for this cause it’s not there anymore!
Thanks my screen got scratched from the dock so I'm probably gonna try this out.
Oof- get yourself a screen protector!
@@x-kat-xd6295 same, i thought about that aswell- i only have one scratch tho so i might get one screen protector
A bit more complicated than a GameBoy Advance, huh?
Thanks man, I don't need this now but I probably will at some point.
everyone switch owner
debating if i really wanna do this or not... my screen works fine but it's scratched to hell and back because it's second hand. ive replaced the digitizer on my switch lite before but do i realllllly wanna go through the trouble again 😫
What should I do if my switch had the screen of death purple screen
I haven’t heard of that, try to open it up and disconnect the battery.
I got an idea. first, take off the back plate and disconnect and reconnect the battery. this will basically turn off the switch. second, turn it on. the LCD should in theory turn on, (the Nintendo logo), turn off for a second (starting up), turn back on, (menu), then eventually turn back off in 5 seconds. Same thing for plugging it in. If it just has a constant purple screen it could be a problem with the motherboard.
weird question: should the digitizer work if not glued? Because i wanted to test it before glueing it and the touch screen doesnt seem to be working so i don't know if the new one is broken or it just needs to be very tight to the lcd screen to be working (and it isnt if not glued).'
edit: it seems that sometimes it register the touch on the left side of the screen but its still not glued.
Thank you for sharing!
wow this looks like a complete nightmare to replace... hope I never need to do this haha.. nice job!
No not a nice job
Is it necessary to remove the motherboard before proceeding? Because i see the 3 ribbon cable can be taken out without removal of the motherboard
Bought a switch a couple weeks ago with a scratched up screen, I didn't mind since I got a really good price on it. But I realized yesterday that it's just the outter touch screen thats damaged, so it's a cheap fix. Pain in the a*s to do tho 😕
Gosh, I just wanted a new screen to get rid of some small scratches, it's a much longer and more complicated process than I anticipated.
To get rid of the scratches you just need to replace the clear digitizer. I can make a video for that. It is simpler.
@@TheFixTech that would be amazing :)
@@TheFixTech would appreciate this too
Same ... I bought mine used cuz it's first version of switch ... The screen oh god ... It has very long scratches it's bother me so much..
@@TheFixTech I hope u will make the video soon , it's really will be helpful , these scratches make me angry :'(
my tape got messed up pretty badly so the screen isnt sticking very well; is there any place i can get a replacement, or am i screwed?
Yeah the adhesive tape on the digitizer mine is old is there a way to find just the double size adhesive gasket tape that makes the digitizer stick to the switch tablet
mine just unplugged thx
Good video man but I don’t got time to do this😂 I’ll deal with my ugly screen
aye bro you gotta use new adhesive or the old one is fine?alsp where do you find adhesive that shape of the screen
I’ve always used the old one as it is very powerful, if you want to use new, just use a thin double sided tape and cut strips into shape.
Hello, I Have a problem.. the silver screw at the top and bottom became stripped.. how do I get them out??? Im very worried because Ive done something wrong when I opened it last time.. I want to double check.. but the screws at the top and bottom became stripped... please help.
I followed the tutorial because I broke my digitizer broke. The touchscreen was working just fine even when I tested it in the middle of taking it apart. When I put it all together, the touchscreen is not working at all. My old touchscreen isn’t working at all either. Is there a solution to this?
I broke a piece of plastic off one of the covers that holds the cables. Now the cable is able to connect and be able to be held in place by the lever that the plastic has but now a section of where the plastic part covered shows the metal lines it once covered. The switch works fine and I haven't played with it long. So I wanted to know if there would be a long lasting effect because of the missing section of the plastic?
Well the ribbon cable will come out if you broke the little plastic clip off so try to tape it so it can’t move. As long as it works it will be ok but it if stops then check that cable first.
Let me know if you have any questions regarding this repair, thanks for watching.
Sorry to attack this post with another question lol but are you still doing the Apple watches series 3?
I am, shoot me another email. Sorry I have been very backed up....
Can you screen repair my scratched switch lite and how much
Is this a good starter project? I want to learn to do stuff like this but I haven’t done anything yet. My touch screen is cracked and I want to fix it but idk if I should trust myself or not.
What is the plastic front is the only thing I want to replace? Do I still have to go through all the steps after you tried out the new plastic front?
Whats an video ic issue? I left myy switch to fix but the tech told me it was irrepeareble because of an ic video issue
Just got another unpatched unit. First one sd card mount inside console is missing a pin and second "new" switch with the screen busted. Do i have to swap screens or can i just swap the motherboards?
Thanks buddy!
The SD card is interchangeable, as soon as you remove the back housing cover it is only held in place with one screw, just replace that piece alone. Get a new screen for the other switch and you can have two consoles. Or make 1 from both, your call
Can I be able to take this to a professional and what would you recommend?I’m 14 and I can buy the required screen and all but I can’t mount it on and so can’t my parents 😅??
A little bug somehow got under the digitizer on mine, could I pry up the left side of the touchscreen and clean under it without issue? Or will I have to open it all up?
It is possible, use minimal heat to assist.
Can you make a video about the digitizer only? Do you need to remove the back too if you just need to replace the digitizer?
Yes, you have to.
I can post a video showing just the digitizer, there is a faster less involved method
14:22 How do you make sure the digitizer is perfectly in line with the lcd before laying the digitizer down ? You need to center the lcd before, don't you ?
Yes, or you can adhere the lcd to the digitizer as one piece before installing using the original cushion tape placed between the lcd and digitizer.
@@TheFixTech Thanks for your reply, that is crucial point for me as I watched so many tutos (you can believe me) and none is clear on this. Basically i am not gonna replace the lcd (so will not remove it from its place or touch his ribbon cable) but digitizer only. I would like to reproduce accurately the step at 14:42 in this video: th-cam.com/video/_7h-ts5FmF0/w-d-xo.html but without removing the lcd at all. How do you suggest i should proceed ? Is it necessary to turn on the console right after installation in order to verify they are well aligned ? Thank you so much
There is not much play for the lcd to move around so it will line up very easily. Also it is slightly more difficult to remove only the digitizer since the lcd is adhered to the digitizer via tape from Nintendo. It is possible but you may cause damage to the lcd so be very careful, slow and use low heat. Pay close attention to where the cable go through the frame.
@@TheFixTech Thank you, really appreciate that you answer. A great quality as a lot of youtuber do not even look at the comments. I hear that it sounds very easy which is definitely perfect new. But still how did you personally proceed for your nintendo switch to center the lcd before laying the digitizer with the cushion tape ? Did you just use a credit card for example to push it a bit from the left, right, up, down ? Is there any tip i should be aware of ? Thanks again for great patience and support
@@popp7223 q
How has the repair held up? I know with screen repairs sometimes they don’t last as long as the original
Been working good, just make sure to use a good screen protector as these screens scratch easily
My display doesnt work but the system sounds and everything still play. I can play it in docked mode but ive tried 2 screens after replacing my digitizer and nothing ive tried will make my display come on! The backlight is on but black screen please help!
Is there any real glass digitizer for the v2 switch like not made of plastic
Not that I know, all are plastic.
What's the quality of those replacement digitizers?
They are very nice, rarely you may receive a defective one that’s does not work properly but you can return for a full refund.
is it too late to get a screen protector cuz i got three tiny little scratches on the screen and the touchscreen sometimes functions by itself.
Too late fam. replace it
Hi my touchscreen works fine and there is no scratches either, but the layer below is cracked and completely broken. What can i do for it
The lcd needs to be replaced.
The top screw on my switch is stripped,what do I do??
Hi there, can we have link for the triwing screwdriver you use for the back plate ? The one I used is trwing 0.6 mm but the head of the screw was unfortunately damaged during repair..
I bought mine awhile ago from eBay, just search Nintendo tri wing, get a good quality steel from a local seller as mine has lasted 10 years
Can I fix it without unscrewing the back
No since the digitizer is plugged into the motherboard.
"Use some prying tools"
Instead uses some *razor blades, with his bare hands*
Do as he says not as he does I guess
@@TH-camiscool865 at least
I screwed up when I was putting the LCD ribbon onto the motherboard. The clip that snaps the ribbon in place broke, so now I don't know what the hell to do. I had it working but then a few days later the screen got lines on it and then it went black, so I'm assuming the ribbon has worked itself out... Any tips or help would be appreciated
If you still have the clip, it can be worked back into place. If not you can try to use a small piece of scotch tape to hold the cable into place, other will have to solder a new connector.
@@TheFixTech I ended up buying a new clip and a microscope..so hopefully I can get the thing put on there, thanks for taking the time to answer back 👍
Does it have the same display quality? It kinda yellowish compared to the original.
Do we need to reapply the thermal paste after replacing the screen?
Not necessary, but never a bad idea
@@TheFixTech Thanks for responding.
Does it work the same for the switch lite??
No, switch lite is similar, but different
Hey my switch just had a purple screen and a error code 2002-3539 what should I do
Get a new one
Wish me luck. I spilled an entire bottle of water in my purse on the one day I brought my switch to work, but thankfully almost everything works fine. Only thing that seems to need replacing is the screen 🤞
Good luck
Can you tell me where do you buy the screens?
I purchase from reputable local sellers on eBay.
Do i have to use old adhissive? Can i use new one ?
Certainly
I just did it but it's not working properly. The screen is flickering and seems to wiggle, if i press it all together it seems to look better, but still wiggles and flickers...
Can you despair mine pls
You should replace the screen inside a dust free box, it would avoid the dust between the screens in the final of video.
You can use your bathroom after shower to avoid dust
13:33 is that black square tape necessary??? I removed and throw it out.... omg
Can I buy it???? Pls help...
It is not required, it is a gasket that helps keep the lcd away from the digitizer. Protects the lcd from cracked under hard pressure. It can be bought…
Can I replace the plastic screen without having to remove the digitizer?
The plastic (clear) screen is the digitizer. The black screen is the lcd. Which one do you need to replace?
@@TheFixTech Can you replace the digitizer without removing the circuits ... so just take the back off in order to free the digitizer and simply replace that
Will my switch work if just leave the digitizer disconnected? I'm not worried about having the touchscreen.
The screen on mine is broken it keeps like clicking on things and I don’t know how to fix it. I need help :(
hello, i have tried this video but when i get to the minute 3:15 that says i have to test the digitalizer... i cant turn my switch on... it apears the logo and anything else. HELP
Make sure the digitizer board is connected to the motherboard.
@@TheFixTech yes it is
Okay, install all the original pieces back in, including a memory card if used. Try again, if working you have a defective piece.
I leave all the originals parts conected and it doesnt work
does your switch run out of charge when you do the repair
Make sure to turn off the switch completely before repair.
@@TheFixTech I Broke Mine, What Can i do?
@@TheFixTech So when i Try To Turn it on it all goes Glitchy
@@yokex8204 r.i.p
Does this contain everything I need?
As far as the repair method yes. You will need replacement parts and tools...
@BmTaYlOr2012 Ah, what do you mean by "having to buy a new screen?" This is a screen replacement, which kinda infers that your screen is broken, which means you'll need a new screen. I'm here to replace a touchscreen, which isn't too expensive, I found one for about 20 USD, which I'd guess is cheaper than sending it somewhere to get fixed? 😅
@BmTaYlOr2012 you aren't very bright.
where can you buy a a new LCD screen?
Ebay or Amazon
I think that you should have put fresh thermal paste in the cpu
I just took mine apart but the digitizer doesn’t have the mirrored back like yours, mine is white!?!
When I put it back together, it docks to the tv fine but on the switch device I get a black screen.. help!?
The white backing is the lcd, you have to separate the lcd from the digitizer
@@TheFixTech ok, I thought I had mistakenly separated the lcd from the digitizer.. so what part is the mirrored back?
everyone in the comments is saying “my switch scratched on the dock, my switch was scratched by the charger.” meanwhile my little brother fucking stabbed his with a screwdriver multiple times without a screen protector on it
This guy is making a bunch of people break their switch even more or gosh 🤪
How many Celsius need it?
Not much, a general hair dryer will work
My digitizer isn't displaying anything, what do i do?
Sounds like your lcd is the issue
touched all the tape supriced all that still stuck together dang
I want to do this and replace the back of the shell because of scratches but i dont trust myself since i broke the switch lite lcd
Also whats the tool called that sticks things back onto the motherboard because i broke that small black connector that connects the battery to the motherboard on the switch lite
The digitizer can be removed without removing the lcd, just be careful separating the two, keep the lcd on the housing.
You mean the soldering iron?
Is it a soldering iron? I thought it was something else lol
You could also use a heat gun.... just use low temp solder and flux
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🙏🏻
How much does it cost to fix a Nintendo switch broken lcd screen normally
The cost of parts are cheap, $30, labor will be more
@@TheFixTech ok so like 80
ican see that coming a part if left in a hot car in minutes and i have seen that
You don't need a hat gun??? so what ur saying is just remove the tape in a hot car???
A scratched screen doesn’t look too bad now
My screen is now black, does anyone have any ideas on how to fix?
WHOOPSIE DAISY GUESS I FORGOT TO BUY ADHESIVE WELP NOW I GOTTA WAIT A MONTH FOR IT TO GET HERE ISNT THAT JUST SWELLLL
A MONTH ! Where do u live lmao
@@yahyaasim5440 Cyprus lol the adhesive arrived and i patched everything up lol
@@gummy8847 was it hard?
@@yahyaasim5440 nah not rrly just took a bit of time
Thanks but if it requieres a heat gun, its not for me.
Only a little heat is needed, a hair dryer will work
@@TheFixTech thats actually helpful. Thank you for taking the time to reply.
You took out alot more than is needed to remove the screen. The board does not need to come out at all same as fan and heat sink but nice video
why not use lcd separator for Hp to do it ?
You could, just remember it does not require much heat.
ok
I don't think I can do this on my own T.T
Give it a shot
I dont want to brake my Switch, im to afraid
can u fix my switch if i ship it to you?? i’m serious
Yes
I really want to do this but you're guaranteed to get dust in there
Welp... All this work because i didn't buy a screen protector
why you using razors?? my dude, please don't slice off your fingers.
Jesus! All that to replace the screen lol
It is unnecessary to remove everything that you removed. Good video for a full tear down, but a little excessive.
True, if all you need is to remove the touchscreen, there is a simpler process. I have a video for that.
I like your video but just buy a new one
I broke the little flex of the lcd screen for what was that flex?.
I believe that is for the lcd backlight
@@TheFixTech thanks.
I can’t turn on mi switch, the screen don’t display anything. But the processor and the nand works because they get warm. I have understood the switch can work without screen in dock mode. But i can’t turn on the switch.
Can’t see anything with his hands blocking
The fix WTF
JESUS LOVES YOU
Yes keep spreading this
Yes!
Just a side note if you call Nintendo and tell them it got scratched because of the dock they will no charge replace it at least they did for mine. I did have a launch day switch and it was way out of warranty might be different for anyone else!
Did you need a receipt or the box at all? Because I got rid of all of mine :/
@@Swag_Killa nope I just sent the switch console and they were cool with it. They told me to include the dock but I had lost mine but they still replaced the screen.
Just make sure you tell them it was from the dock
NEVER USED A METAL TOOL TONOPEN DE SWITCH ,YOUNCOULD SHORTCIRCUIT SOMETHKNG INSIDE NY ACCIDENT AND YOUR SWITCH ISNDONE
pro tip: use gloves to not get ur fingerprints all over ur screen
You touch the screen aaaaaaaaaaaahhhhhhhh DONT DOU THIS
you took so many thing of u disnt need to ive done it before many many times..you just went to far
Tucker Carlson in the background 😬
Grow up
LOL he truly does not know how to properly replace a screen LOL that is not the proper way.
he still did it though
not worth breaking it, just by a screen protector with thick layers and you wont notice it