I need to replace my turn signal switch in my 13’ Jetta SE. I’ve been searching for months. And now I find this. Thank you. Just saved so much money and time
I really appreciate that you took the time to make this video! You effectively render these projects "un-intimidating" and inspire me to do the work myself! I just have to gather the right tools...damn all those torx, triple squares etc...
FOR B7 PASSAT OWNERS, WE DONT HAVE SCREWS HOLDING THE MULTIFUNCTION SWITH ON, INSTEAD THERE ARE 3 CLIPS, 2 ON THE BACK OF THE LEFT AND RIGHT SIDE SND ONE ON THE BOTTOM. THIS VIDEO HELPED A LOT.
Thanks Falconer. I was searching and searching just like you. I could not find anything. Then I found your video under 'steering column replacement'. I was searching under 'Windshield Wiper Switch Replacement'. After a deep freeze that lasted about one week, my windshield washer motor stopped working and my wipers started acting very funky. I have the 2013 Jetta Sportwagon. When I pull the lever to wash the front windshield, the rear wiper swipes along with the normal front wipers swiping twice. When I push the lever to activate the rear wiper wash, the rear wiper swipes and the front wipers swipe twice like I was washing the front windshield (pulling the lever). Very odd! I have traced it back to this multi-switch by process of elimination.
The later mk5 has a similar clamshell arrangement, can't say for sure about the earlier 5s. Never worried about the white clips on the springs, it was fine, it went together easy, didn't realise they came out of the wheel. The air bag plug is different, pull the white spring loaded collar towards you. The rest of it is different too, the switches being separate rather than one lump etc. They use crap wire in the stalk arm and it breaks, it can be repaired with care. Same as the tailgate umbilical, that fatigues and things stop working. Thanx for the video, explains a lot. Can't believe the stalks are all one unit though, that's nasty. Wonder what the 7 is like? Edit. Just done some digging, the last mk5 was the same as the first mk6, this video shows the later mk6. The mk7 looks pretty similar going by the bits being sold on eBay.
Probably because I smoke or dust grease I sprayed electrical cleaner in it it’s fixed nicotine I guess when you clean windows you see the shit that comes off but you gave me information to fix it thanks bro
Dude. You make me laugh. Going to be trying to fix the non-functioning washer motor on Wifey’s 2013 Jetta tomorrow so was doing some research. Watched your pump removal/reinstall video and this video too. I had to chuckle at your technique & commentary. Real talk. Real scenario. Really fixin’ shit. Subscribed & anxious to see more of your Jetta content....
Hey nice video but just one question.. so my front windshield wipers wont work but everything else does, for example the high beam, turn signals, rear wiper and windshield fluid all work except the front wipers.. do you think its the switch or something else?
HAHA We appreciate your video out here sir! Thanks, i think i need to change mine soon if i figure out where this damn flash relay for my turn signal. I mean i think its in the signal switch so yeah
Great video. Why were you replacing the switch and how did you get to that conclusion? I have a failed wiper and so far, motor is good, fuse if good, wiper switch is good, if i turn the ignition off and on pull the wiper plug, engage the wiper stalk plug the wiper motor it responds a little!? I am ordering a power probe tool to see if i can find a short is my only theory at this point!?
I honestly can’t remember. I do remember spending hours upon hours searching for a fuse chart because if I remember correctly everything on the switch worked except for the wipers, I finally found one on some Russian website and was able to determine that I had power to the wiper motor and switch so I changed out the switch and haven’t had any issues since. I saved all the documents concerning the fuses and wiring diagrams to the google drive account I had at the time but I haven’t been able to access the account in a few years.
Is there a way to get the signal arm without having to do all this? Can you just take the plastic covers off the steering column and unplug the signal arm unscrew it and remove it?
Same procedure for anyone wanting to fit cruise control to a (mark) 6 Golf. You’ll need the correct stalks and cruise-compatible slip-ring/clock-spring, and VCDS to enable cruise functions but otherwise this covers the meat of the job.
I’m having an issue with my windshield wiper fluid not working. The wipers work but when I pull to activate the washer fluid it does nothing. Is that the same issue you were having?
Thank you, very informative, good instructional video. Question- where did you find the used VW parts? Scour through a junk yards or online source for used VW parts?
hi falconer, i'm hoping you will be able to help me out. mk6 jetta tdi premium. i'm replacing my multifunction switch however the new unit has two white circuit clips instead of the large blacks clip that connects to the cruise/left signal. I've done my due diligence on trying to locate the same version of the 2012 vw multifunction, but i believe they switched designs half way through the year or had a recall to completely remove the original design completely. however, the multifunction that you originally had is my exact model. do you have any information on how i could obtain one? thank you.
Intermittent then continuous fault. Pulling fuse worked until rainy season. Watched this but didn't have M12 spline remover. Took clip off indicator and filled housing with wd40. Stopped working. Bugger. But a few hours later all dried out and back to normal... Touch wood
Does your cruise control work after the replacement? Mine stopped working itself. I am afraid it is a computer reset that deactivated the cruise control.
Switched out mine and the wipers still go on for about one minute, then stop. Thinking of trying to replace the relay but don’t know where it’s located and what number it is. If anyone could help I’d really appreciate it!!
I basically did what you did someone said disconnect battery resets Bcm I will try this first before replacing multi function switch lol let you no bro
Lots of good reviews about this. Admittedly I am a mechanical idiot, but I am more confused now than before I started the video. Made me tired just listening to him grunt and groan.
Thank you! Of course there’s no info. VW is a bunch of a@$holes and want you to come to the dealer for everything. The Manuel doesn’t even come with a fuse diagram. They quoted me over $800 to replace this. I found the part at RockAuto and fixed it myself with your vid.
So I have a question and was wondering if I can get your opinion on what you think. So my wipers dont turn on when I turn the wiper switch on, but the windshield wipers fluid does work. I checked the fuse box and nothing, they are all good. I changed the wiper motor and linkage and still nothing. Do you think it could be the wiper switch? I'm starting to think that it might be that since you had a similar problem but instead of the wipers, it was the windshield wiper fluid. Do you think it could be the switch?
There is tons of information online but you need to speak another language from EU. Most what we drive there are European vehicles and every shop knows how to work on these. They're only a mystery on this side of the ocean and because they have no clue, they think it's hard and overcharge you...
I need to replace my turn signal switch in my 13’ Jetta SE. I’ve been searching for months. And now I find this. Thank you. Just saved so much money and time
5 years since this was uploaded and i come back to fix my 2011 Škoda Yeti, a real youtube gem!!
You know if the 2014 vw base model without cruise control fits the one with
I really appreciate that you took the time to make this video! You effectively render these projects "un-intimidating" and inspire me to do the work myself! I just have to gather the right tools...damn all those torx, triple squares etc...
FOR B7 PASSAT OWNERS, WE DONT HAVE SCREWS HOLDING THE MULTIFUNCTION SWITH ON, INSTEAD THERE ARE 3 CLIPS, 2 ON THE BACK OF THE LEFT AND RIGHT SIDE SND ONE ON THE BOTTOM. THIS VIDEO HELPED A LOT.
What was the reason you changed your switch?
The right side was broken clean off
Thank you. You made my life better helping a coworker out of a jam.
Thanks Falconer. I was searching and searching just like you. I could not find anything. Then I found your video under 'steering column replacement'. I was searching under 'Windshield Wiper Switch Replacement'. After a deep freeze that lasted about one week, my windshield washer motor stopped working and my wipers started acting very funky. I have the 2013 Jetta Sportwagon. When I pull the lever to wash the front windshield, the rear wiper swipes along with the normal front wipers swiping twice. When I push the lever to activate the rear wiper wash, the rear wiper swipes and the front wipers swipe twice like I was washing the front windshield (pulling the lever). Very odd! I have traced it back to this multi-switch by process of elimination.
Thank you for making this video ! There is no way I would have been able to do this job without you. Keep em coming
Dude. You are a champion. Thank you so much for this. You resurrected my 2013 Jetta. Cheers!
You have just saved my life and you are brilliant with your camera thank you man
You are the best host. You educated me while keeping me entertained. I wish all you tube videos could be this way. Keep up the good work.
I replaced it in my VW jetta 2014. High beams were not working, so I replaced it. It works now. Thank you so much for your video
Did your high beam only work when holding the leaver?
Great video!!! Changed my indicator stalk which had an intermittent fault. Cheers from the UK
10.out of 10 info and entertaining.. made my life alot easier.. thanks
Awesome video, you encourage me to change the multifunction switch on my Son’s VW Jetta. Thank a lot for your help.
This was very helpful. I just did this exact thing to a 2015 Volkswagen Beetle. Thank you for the time.
Thanks for the video. I have saved this video, in case I have to do this to my daughters 2013 VW Jetta.
The later mk5 has a similar clamshell arrangement, can't say for sure about the earlier 5s. Never worried about the white clips on the springs, it was fine, it went together easy, didn't realise they came out of the wheel. The air bag plug is different, pull the white spring loaded collar towards you. The rest of it is different too, the switches being separate rather than one lump etc. They use crap wire in the stalk arm and it breaks, it can be repaired with care. Same as the tailgate umbilical, that fatigues and things stop working. Thanx for the video, explains a lot. Can't believe the stalks are all one unit though, that's nasty. Wonder what the 7 is like?
Edit.
Just done some digging, the last mk5 was the same as the first mk6, this video shows the later mk6. The mk7 looks pretty similar going by the bits being sold on eBay.
Excellent video. The high beams on my MK6 would not work. I was able to change my switch using your video. Thanks!
I'm the same I need to buy the whole unit
I was so close to drill the shear bolts out till you shown THAT STUPID T10 SCREW
Thank you good sir for the big save
Saved me some frustration and money man. Thanks for the vid!
Thanks for the video! It helped me pick and pull one and going to install now! Thanks again for recording the steps.
So glad I saw this, was just about to try and remove those security screws 😂
Best dyi video out there. You are quite the character good sir thank you for the info.
Probably because I smoke or dust grease I sprayed electrical cleaner in it it’s fixed nicotine I guess when you clean windows you see the shit that comes off but you gave me information to fix it thanks bro
Nice job Grandpa, that’s help me a lot
Excellent video! Pointing out the #10 screw saved the day!! Thanks!!
Thanks 🍻🍻🍻
Dude. You make me laugh.
Going to be trying to fix the non-functioning washer motor on Wifey’s 2013 Jetta tomorrow so was doing some research. Watched your pump removal/reinstall video and this video too. I had to chuckle at your technique & commentary.
Real talk. Real scenario. Really fixin’ shit.
Subscribed & anxious to see more of your Jetta content....
If it’s not the fuse you’ll probably end up having to replace the multi-function switch. 🍻🍻🍻
You sir are an angel!! Thanks for the great video.
Thanks for the knowledge! Now to go return the wrong part and get the right part!
Thank you for sharing the video. You saved me a lot of head scratching.
Thank you!
Thanks for making this vid man that saved alot of hassle.
Thank You
You saved me a lot of time
Awesome video. Thanks for sharing it.
Fair play, love your lingo mate :)
Hey nice video but just one question.. so my front windshield wipers wont work but everything else does, for example the high beam, turn signals, rear wiper and windshield fluid all work except the front wipers.. do you think its the switch or something else?
With this video I changed my blinker fluid
Just spray electric cleaner with the long tube on it it’s fixed thanks for information
HAHA We appreciate your video out here sir! Thanks, i think i need to change mine soon if i figure out where this damn flash relay for my turn signal. I mean i think its in the signal switch so yeah
thanks man that saved a head ache
Does the 2014 base model vw without cruise control fit the one with ?
Great video.
Why were you replacing the switch and how did you get to that conclusion?
I have a failed wiper and so far, motor is good, fuse if good, wiper switch is good, if i turn the ignition off and on pull the wiper plug, engage the wiper stalk plug the wiper motor it responds a little!? I am ordering a power probe tool to see if i can find a short is my only theory at this point!?
I honestly can’t remember. I do remember spending hours upon hours searching for a fuse chart because if I remember correctly everything on the switch worked except for the wipers, I finally found one on some Russian website and was able to determine that I had power to the wiper motor and switch so I changed out the switch and haven’t had any issues since. I saved all the documents concerning the fuses and wiring diagrams to the google drive account I had at the time but I haven’t been able to access the account in a few years.
Good video mate. Was wondering if it is easy to remove and reconnect just the indicator switch. I saw them selling these separately.
Very helpful video, thank you!
Thank you Man!! Usefull at all!!
Nice one. Thanks man.
Is there a way to get the signal arm without having to do all this? Can you just take the plastic covers off the steering column and unplug the signal arm unscrew it and remove it?
Same procedure for anyone wanting to fit cruise control to a (mark) 6 Golf. You’ll need the correct stalks and cruise-compatible slip-ring/clock-spring, and VCDS to enable cruise functions but otherwise this covers the meat of the job.
Thanks had to do this because the High Beams didnt work.
I’m having an issue with my windshield wiper fluid not working. The wipers work but when I pull to activate the washer fluid it does nothing. Is that the same issue you were having?
Does the pump make a noise? There is enough fluid in the reservoir? It isn't blocked?
This is exactly what I am experiencing, windshield wipers work, but won't move with the washer function, and won't spray.
After replacing this part myself it fixed the issue.
mine doesn't have cruise do you think its wired for cruise and all i have to do is add the cruise lever thing ?
Thank you, very informative, good instructional video. Question- where did you find the used VW parts? Scour through a junk yards or online source for used VW parts?
I think I have the same issue on my vw CC my washers are not working and my full beam doesn’t stay on I have to hold it then it works
hi falconer, i'm hoping you will be able to help me out. mk6 jetta tdi premium. i'm replacing my multifunction switch however the new unit has two white circuit clips instead of the large blacks clip that connects to the cruise/left signal. I've done my due diligence on trying to locate the same version of the 2012 vw multifunction, but i believe they switched designs half way through the year or had a recall to completely remove the original design completely. however, the multifunction that you originally had is my exact model. do you have any information on how i could obtain one? thank you.
Did you end up figuring out?
Did anyone do this because their cruise control didn't work, and did it work after if so?
Did the low and high beams worked after ?
👍 yes
Intermittent then continuous fault. Pulling fuse worked until rainy season. Watched this but didn't have M12 spline remover. Took clip off indicator and filled housing with wd40. Stopped working. Bugger. But a few hours later all dried out and back to normal... Touch wood
Thank you for the video
Hi , can you tell me which brand and producer of original switch wipers ? is valeo ?
Thanks so much 🙏 💓
Brilliant you rock my man
3:29, I said the same thing. I thought I should of marked it first. I found the same notch. Haha
Great video but PLEASE invest in a tripod, I got motion sick watching this.
Can U tell us How much u bought multiple function Turn signal for u car
How did the switch work after the install? Any issues months/years later?
Works perfect 🍻🍻🍻🍻
Holy crap - they work!
Thank you sir 🙏
Cheers to you mister.
Great tutorial
Merci pour cette vidio
my airbag light comes on whats the crack there amigo
Thank you buddy.
Thank you!!!
Nice job!
I just sprayed some wd40 some electric spray blew it out with air pressure fixed it’s the cleaners like armorel gets on contacts just sayingbro
Thanks bro
Does your cruise control work after the replacement? Mine stopped working itself. I am afraid it is a computer reset that deactivated the cruise control.
Yuhong Liu where you able to fix your cruise control?
Switched out mine and the wipers still go on for about one minute, then stop. Thinking of trying to replace the relay but don’t know where it’s located and what number it is. If anyone could help I’d really appreciate it!!
It might be worth jumping the motor to rule that out.
@@116falconer windshield wiper motor and how do you do that?
Did you end up figuring it out? I'm having a similar issue
I basically did what you did someone said disconnect battery resets Bcm I will try this first before replacing multi function switch lol let you no bro
Mine is a push button start and it's all 1 piece.
thank god for u
I have one that only works the wipers went it whants but it won’t turn of did you know if it can be the same switch
I would assume it’s the same. If you pull the multi-function switch it’s easy to check and repair.
116falconer o ok because the wipers won’t stop working went I select or turned of only it doesn’t went I turn of the car or sometimes it self
Hi mate, can I have this module parts number for reference? Thanks
thank u!
+timmy lopez you are welcome 🍻🍻🍻
I think ill just deal with having to hold it to keep the bights on... lol
thanks but I missed the screwdrive
Lots of good reviews about this. Admittedly I am a mechanical idiot, but I am more confused now than before I started the video. Made me tired just listening to him grunt and groan.
Thank you! Of course there’s no info. VW is a bunch of a@$holes and want you to come to the dealer for everything. The Manuel doesn’t even come with a fuse diagram. They quoted me over $800 to replace this. I found the part at RockAuto and fixed it myself with your vid.
phil gillis!
You could've checked the fuse first
Thx
So I have a question and was wondering if I can get your opinion on what you think. So my wipers dont turn on when I turn the wiper switch on, but the windshield wipers fluid does work. I checked the fuse box and nothing, they are all good. I changed the wiper motor and linkage and still nothing. Do you think it could be the wiper switch? I'm starting to think that it might be that since you had a similar problem but instead of the wipers, it was the windshield wiper fluid. Do you think it could be the switch?
Awesome
There is tons of information online but you need to speak another language from EU. Most what we drive there are European vehicles and every shop knows how to work on these. They're only a mystery on this side of the ocean and because they have no clue, they think it's hard and overcharge you...
Do not lie so many videos how to replace this unit
Almost all information is online about vag cars download the documents on erwin. volkswagen. de
clean your car pls
Thanks Buddy 👍