Thank for you explaining this. I am using 500 Ohm resistors on my Analog inputs that are 0-10VDC. Do I use the same 500 Ohm resistors on 0-10VDC analog outputs? I'm using an Allen-Bradley 1766-L32BXBA that has 4 Analog Inputs and 2 Analog Outputs(0-10VDC).
Thanks Sir... I have one confusion.. Plz help me….. Almost Transmitter or Instrument is power up 24 VDC through DCS/PLC. When A/I signal 4-20 mA transmit from field to DCS. After that 4-20 mA signal convert to 0-5 VDC. But here on same path existing voltage 24VDC available.so how to possible 2 different level of voltage (24 VDC & 0-5VDC) in same path.??
4 20 mA vfd को कैसे signal देता है! और pressure beed back कैसे लेकर motor ka speed increase करता है! मान लिजीए की हमारा process pressure set value 30 kg/cm2 है तो feed back कैसा देगा विडियो में बताईये Thanks
Sir, I don’t understand the language but I’m assuming that you’re trying to explain how to convert 4-20 mA signal to 2-10 VDC signal. If that’s the case, then why the schematic is showing the resistor connected in parallel? It has to be in series correct? Am I missing something here? Please explain
The resisitor is not connected in parallel, it is in series itself. To show that we are measuring Vdc across the resistor he has stretched the arrow marks. Vdc is not a voltage source, its the symbol given to the voltage drop across the resistor.
You are the best sir!!!!
Good coaching
Sir pls configuration kise kare us pe Video banaye Aap k a video Bahut helpful hota hai
Sir mujhe 1A AC adjustable current source Relay testing ke liye banana hai. Kaise banaye
Kaun sa type ka components lagega?
Please guide me
Thank for you explaining this. I am using 500 Ohm resistors on my Analog inputs that are 0-10VDC. Do I use the same 500 Ohm resistors on 0-10VDC analog outputs? I'm using an Allen-Bradley 1766-L32BXBA that has 4 Analog Inputs and 2 Analog Outputs(0-10VDC).
Superb sir....
Sir
Plc given 10v input AI &
Vfd need to 10v AO coming
Using resister ?
A -10v to +10v temp. Transmitter is measured from -50degree to +300degree. At +76degree what is output voltage?
Thanks Sir...
I have one confusion..
Plz help me…..
Almost Transmitter or Instrument is power up 24 VDC through DCS/PLC.
When A/I signal 4-20 mA transmit from field to DCS. After that 4-20 mA signal convert to 0-5 VDC.
But here on same path existing voltage 24VDC available.so how to possible 2 different level of voltage (24 VDC & 0-5VDC) in same path.??
Sir resistance perreral me nahi balke surise me lagana chaahiye please confirm
Yes i have tried this it is always use in series
Yes you are correct
Sir dc 5volt current 5miliampere ko dc 6volt 2amp kaise hoga ispar ek video bnaye
Ok Sir
Thanks 😊
Thnx sir ji
4 20 mA vfd को कैसे signal देता है! और pressure beed back कैसे लेकर motor ka speed increase करता है!
मान लिजीए की हमारा process pressure set value 30 kg/cm2 है तो feed back कैसा देगा विडियो में बताईये
Thanks
sir why your TH-cam channel is dead
Sir plz upload about foundation fildbus
Sir,
I don’t understand the language but I’m assuming that you’re trying to explain how to convert 4-20 mA signal to 2-10 VDC signal. If that’s the case, then why the schematic is showing the resistor connected in parallel?
It has to be in series correct?
Am I missing something here? Please explain
The resisitor is not connected in parallel, it is in series itself. To show that we are measuring Vdc across the resistor he has stretched the arrow marks. Vdc is not a voltage source, its the symbol given to the voltage drop across the resistor.
Plz share wiring diagram
Sir can we connect single 4-20 ma to 2 sources?(i mean from single 4-20ma can we run 2things?)
Yep, current is the same Anywhere in a series circuit. All devices in the loop will see the same current.
Sir how to convert 0 to 5volts to 4to20milli ams
today u are looking beautiful
Thanks 👍