for Todd's sake can we please have a bloody video of just side projects!!!! In all seriousness...the side projects are a big part of the reason i like watching your videos.
@@InheritanceMachining So it’s quite clear that the problem with all of this equipment that you’ve inherited is rust and corrosion over an extended time. Is there a good method for storing all of these items that doesn’t involve frequent re-application of rust inhibiting oil and wrapping in wax paper? Or is that the standard? I guess you could also blue the parts but that comes with it’s own challenges and also isn’t perfect long term. I’m not a machinist. Like you, I’m a mechanical engineer, but I do love this stuff!
@@The.Talent I can’t really speak from experience here. But I can say that my shop has a dehumidifier running non stop where the shop these came from had poor climate control and also was abandoned without and climate control for 2 years. My hope is that frequent use, oil, and a dry shop will cover me
@@InheritanceMachining I did. The work you did on it was awesome! I was telling my missus about your shop and ideas I had for mine. I'm just being a bit selfish. When I see that counter pop up on screen it makes laugh. Gonna be a good content!
"Have you ever started a project knowing exactly what you want the end product to be but no clue how you'll get there?" (paraphrased) I am a programmer. You just described a solid two thirds of all personal projects I've undertaken.
it always amazes me to think, that under all of those years of rusting, just a few thou under the surface lays a perfectly good tool fit to be used for future generations. I'm a woodworker, not a machinist, but to an extent, the same holds true for wood. I've used old barn wood that had probably been sitting in the same place for over 50 years, and after the first layer of dirt and age had been removed, you'd never be able to tell just how mangy a piece really was before you put your hands on it. every time I'm down in my woodshop, I get to uncover the beauty of the wood underneath so many imperfections, and its truly the reason i keep doing what i do. watching videos like this only reinforces that idea in me.
Brandon, I must say. The speed at which your channel has taken off is astounding. Most people spend multiple years building a channel to your level of popularity. This only shines a light on how you came out of the gates with excellent quality. Keep up the great work!
Thank you so much! I'm definitely surprised as well at how well the channel is growing. I have to give a lot of credit to my wife though. She has been on TH-cam for years now and helped me a ton. And still does! Thanks again!
@@InheritanceMachining A fellow engineer as a wife and experienced YTer? And she helps you set up move and set up shop on top of that? She is exalted among women!
Have you ever noticed how much time hobby machinists spend making tools to do machining? It’s an awesome project and I’m green with envy of the shop. I just think it’s a funny observation that some machinists only seem to do machine tool projects.
I kinda wish I had a grandpa like yours. I gotta build up my tool collection from scratch. You’re extremely blessed, man. AND you’re doing it all justice. Keep making videos. You got a subscriber for life.
Not a day goes by that I'm not thankful for what I have but more importantly the time I got to spend with my grandfather. Thank you so much for the support
Each project ( & side projects) reinforces the foundational aspects of your machining skills. By improving your tools, you'll achieve consistency and repeatability in your measurements and dimensions. You are well on your way to becoming a toolmaker and it is a pleasure to watch this journey. 😊
Have you ever... YES!!! I have this old motor lying around and every other part of the car that was attatched to it. I went on dismanteling and ended up with a total stripdown. I am only procrastination away from building this in line four cylinder with only one cam to live up again.... Thank you for putting in this extra stress when you decide to film it all for us!
Usually with content like this creators bore me with pointless information or whatever. But with your videos I genuinely can’t skip any of it because you’re just that entertaining with the way you present it.
I'm a CNC machinist by trade but there's just something so satisfying about manual machines. Found you a couple days ago and have been binging through your videos. Keep up the good work friend.
More than 30,000 subscribers in such a short time is evidence of the interest in your content and the valuation of your presentation. It is really satisfying to see those tools come to life, looking better than new. Thanks for your efforts to share this work with us.
I absolutely love your videos. I've been binge watching for the past couple of hours. I myself am a fellow machinist of 26 years. And I still see a few things you're doing that I didn't even think of!
I used to work in a shop where all we did was rough trepanning of cast iron into tubes. running big hexagonal turret lathes and flood coolant. It was fun, messy, and loud. I miss that shop.
Great work as always. I appreciate that you explain HOW and WHY you are doing what you're doing. I work in a prototype/job shop and precision is the name of the game.
@@InheritanceMachining , I KNOW that feeling! We forget how our feelings make us driven to some levels not considered necessary, but totally believable!
I'm a mechanic and I've worked in quite a few different industries over the years. Started out in dealerships and garages, went in the army as a mechanic, I've worked on heavy equipment and in a factory. If you ask ten mechanics how they'd tear something apart and reassemble it you'll get 20 different answers. It's good to have options.
Starting a side side project to complete a side project only to realize you need to start a side side side project to complete the side side project for the side project not realizing you could have just used the side side side project to complete the side project. Perfection.
Just found your channel and binged all your videos over the last couple days. For this one, and lots of your other tools that don't like rust, spray them with fluid film, then wipe off the excess after about 20mins.
I came to your channel to look for something else to show someone, and somehow realized I'd missed this video! A sort of blast from the past, because it's clearly of an older chronology in the life of your channel, and yet I'm still so glad to have picked this bit up. Dunno how I missed it in the first place, but, now I'm back up to speed! :)
10/10 you have some of the best home shop videos on YT right now. I'm glad you got the 246 blocks whipped into shape as well as the angle plate. Both are quite useful to have around, and now yours are in tip-top condition! It was a pleasure watching. FYI my vote is for longer less condensed videos, but I'll take what ever I can get 🙂
If you like this Channel go check out This Old Tony. He is basically the godfather of home shop videos. You can tell Brandon watches his videos by the videos Brandon puts together. And, of course, the godmother BlondiHacks is evident in Brandon's videos too.
I love the little edition to what you previously done and then added this in order to improve that, so its not just one project done and the next. Love watching it though, very satisfying.
It's funny watching this video now. When you were fly cutting the face, I kept saying to myself "You have a precision machinist jack and a huge fly cutter already!" then I realized this video was before you made both of those.
Great videos, I started watching your channel since you started posting videos and I really like your content. As a fellow machinist myself i have learned some new tricks thanks to you. Keep up the great work.
I have very little knowledge or interest in machining, but your videos are so good I watched them all. There is something relaxing about them. I enjoy good problem solving.
If I could buy stock in a channel that I expected to grow, I’d yolo on yours. With this, style, content, and production quality, I really think the only limit is how much time you want to devote to it.
I gotta say i ADORE what you are doing, so glad you popped up in my recommended a few months ago and god yes, side project galore is bane of my existence too xD
Brother, am a fellow machinist myself operating various milling machines, but the way you are using conventional machines to machine accurately is mesmerising! Keep up the good work!
This man would be lost in the world if the surface grinder hadnt been invented! hahaha. Really enjoyed the video as always! Thanks for uploading so frequently.
One thing I've noticed about Evaporust is that, weirdly, brake cleaner doesn't do much to clean up Evaporust residue. Warm water actually works much better.
Cast iron and leaded steel. My two favorite ferrous metals to machine. Also the two messiest. 12L14 machines like butter and can be parkerized (Brownells solution) to a beautiful matte black. Almost forgot. Thanks!
Good stuff from what I saw, little tip for future reference, when using a surface grinder, keep the wheel on. The wheel will keep its concentricity stable and wont change your depth when moving. Although I get it, it can get freaky when setting up though.
Huh... I never would have considered that. It doesn't really freak me out to work around it running. I do it when dressing and other quick operations. Thanks!
Pretty cool. I need to do this to one of my angle plates. if you don't already, Id recommend making up a set of aluminum or similar soft metal washers for when you clamp onto onto your 246 or other blocks, from what ive found even a properly hardened block will get "ring" marks from a standard hardware grade washer tightened under a nut or bolt. Once mine started getting marked up I made the switch.
Thanks for watching everyone! Be sure to tune in in 2 weeks or turn on the notification bell for the next upload on Friday August 19th!
for Todd's sake can we please have a bloody video of just side projects!!!! In all seriousness...the side projects are a big part of the reason i like watching your videos.
@@toddsmash Did you catch my mill upgrade video? Exclusively side projects. 21 to be exact! And I'll probably be doing more of these
@@InheritanceMachining So it’s quite clear that the problem with all of this equipment that you’ve inherited is rust and corrosion over an extended time. Is there a good method for storing all of these items that doesn’t involve frequent re-application of rust inhibiting oil and wrapping in wax paper? Or is that the standard? I guess you could also blue the parts but that comes with it’s own challenges and also isn’t perfect long term. I’m not a machinist. Like you, I’m a mechanical engineer, but I do love this stuff!
@@The.Talent I can’t really speak from experience here. But I can say that my shop has a dehumidifier running non stop where the shop these came from had poor climate control and also was abandoned without and climate control for 2 years. My hope is that frequent use, oil, and a dry shop will cover me
@@InheritanceMachining I did. The work you did on it was awesome! I was telling my missus about your shop and ideas I had for mine.
I'm just being a bit selfish. When I see that counter pop up on screen it makes laugh. Gonna be a good content!
id just be really pleased with those clamp slot things you made to hold the sine plate with haha
😂 Thanks, Colin!
13 mil subs and only 1 reply
@@Philyshark7now its 2
@@Philyshark7wait 4
A fabricator that appreciates machinists?
Welcome friend!
I could watch your videos for hours. You are quickly becoming one of my favorite channels
Glad to hear that! Thank you!
I’ll second that
@@samjohnson7325 I third it. If that's a thing.
if its not it is now.
Definately
I totally agree. Guess that makes me fourth. Randall in Winchester, Kentucky.
"Have you ever started a project knowing exactly what you want the end product to be but no clue how you'll get there?" (paraphrased)
I am a programmer. You just described a solid two thirds of all personal projects I've undertaken.
it always amazes me to think, that under all of those years of rusting, just a few thou under the surface lays a perfectly good tool fit to be used for future generations. I'm a woodworker, not a machinist, but to an extent, the same holds true for wood. I've used old barn wood that had probably been sitting in the same place for over 50 years, and after the first layer of dirt and age had been removed, you'd never be able to tell just how mangy a piece really was before you put your hands on it. every time I'm down in my woodshop, I get to uncover the beauty of the wood underneath so many imperfections, and its truly the reason i keep doing what i do. watching videos like this only reinforces that idea in me.
Brandon, I must say. The speed at which your channel has taken off is astounding. Most people spend multiple years building a channel to your level of popularity. This only shines a light on how you came out of the gates with excellent quality. Keep up the great work!
Thank you so much! I'm definitely surprised as well at how well the channel is growing. I have to give a lot of credit to my wife though. She has been on TH-cam for years now and helped me a ton. And still does! Thanks again!
@@InheritanceMachining That's great that you've had an experienced mentor. Thank her for us!
@@simonhoey6575 Will do!
@@InheritanceMachining A fellow engineer as a wife and experienced YTer? And she helps you set up move and set up shop on top of that? She is exalted among women!
@@kurtfrancis4621 She is indeed!
Have you ever noticed how much time hobby machinists spend making tools to do machining? It’s an awesome project and I’m green with envy of the shop. I just think it’s a funny observation that some machinists only seem to do machine tool projects.
I kinda wish I had a grandpa like yours. I gotta build up my tool collection from scratch. You’re extremely blessed, man. AND you’re doing it all justice. Keep making videos. You got a subscriber for life.
Not a day goes by that I'm not thankful for what I have but more importantly the time I got to spend with my grandfather. Thank you so much for the support
Each project ( & side projects) reinforces the foundational aspects of your machining skills. By improving your tools, you'll achieve consistency and repeatability in your measurements and dimensions. You are well on your way to becoming a toolmaker and it is a pleasure to watch this journey. 😊
Thank you! There's so much to learn so I'll get there one step at a time. But that's also why I love this so much!
Best machining channel of the month* on TH-cam. (* For months that This Old Tony don't upload videos)
😂 he set's the bar high! But ill take it
Have you ever... YES!!!
I have this old motor lying around and every other part of the car that was attatched to it.
I went on dismanteling and ended up with a total stripdown. I am only procrastination away from building this in line four cylinder with only one cam to live up again....
Thank you for putting in this extra stress when you decide to film it all for us!
Usually with content like this creators bore me with pointless information or whatever. But with your videos I genuinely can’t skip any of it because you’re just that entertaining with the way you present it.
I really appreciate you saying that. Thanks so much
Restoring the usefulness of an old tool is never a waste.
True!
Inheritance machine shop is fast approaching being my favourite machining channel we all love a side project in the home shop
thank you so much! There are so many side projects if I didn't show they I wouldn't have much to show at all 😂
I'm a CNC machinist by trade but there's just something so satisfying about manual machines. Found you a couple days ago and have been binging through your videos. Keep up the good work friend.
I worked in a tool and die shop out of high school , I forgot how much I like machining 👍🏻, even if it is watching someone else
You won't ever regret the work you did to get that angle plate correct . You can never have enough fixturing options .
Side Projects! Your storytelling is fantastic, and the production values are great. Keep at it, I'm loving your channel!
That is very much appreciated! Thank you!
Dear Brandon, not quite Suburban Tools but a long way through your journey. Thanks for sharing your lovely work.
Don Bailey is great! Surface grinding is one of the deepest rabbit holes one can get into for sure. Thanks!
More than 30,000 subscribers in such a short time is evidence of the interest in your content and the valuation of your presentation. It is really satisfying to see those tools come to life, looking better than new. Thanks for your efforts to share this work with us.
It's surprising to me fore sure but I'm thankful for every last one of them. Thanks for the continued support, Bruce!
I absolutely love your videos. I've been binge watching for the past couple of hours. I myself am a fellow machinist of 26 years. And I still see a few things you're doing that I didn't even think of!
That was very relaxing to see how those rusty parts became brand new again. Well done. 👍👍👍👍
Thanks! The transformation was surprising to me as well!
I used to work in a shop where all we did was rough trepanning of cast iron into tubes. running big hexagonal turret lathes and flood coolant. It was fun, messy, and loud. I miss that shop.
I can attest to the messiness of cast iron. And I didn't even use coolant!
Great work as always. I appreciate that you explain HOW and WHY you are doing what you're doing. I work in a prototype/job shop and precision is the name of the game.
Thank you! The precision in a lot of my projects isn't always strictly necessary but normally driven by a compulsion to do the best I possibly can.
@@InheritanceMachining , I KNOW that feeling! We forget how our feelings make us driven to some levels not considered necessary, but totally believable!
I'm a mechanic and I've worked in quite a few different industries over the years. Started out in dealerships and garages, went in the army as a mechanic, I've worked on heavy equipment and in a factory. If you ask ten mechanics how they'd tear something apart and reassemble it you'll get 20 different answers. It's good to have options.
Same applies in the machining. Just a bunch of trade-offs, the importance of which depends on the individual
Great project, even better narrative 👍
thank you!
08:24 I never knew just how much I love a good chamfer until TH-cam suggested your channel. Thanks for scratching that itch oh so well!!
Starting a side side project to complete a side project only to realize you need to start a side side side project to complete the side side project for the side project not realizing you could have just used the side side side project to complete the side project.
Perfection.
It is the way
Turned out to be a very nice piece , never hurts to have options . Great grinding methodology and order of operations. Nice work , thanks for sharing.
Thank you! One day everything in here will be cleaned up.
I have no idea what this thing is, what it does and why its usefull, but this is some great stuff to just watch, listen and relax to.
How does their channel only have 30k subscribers!? Come on TH-cam algorithm get recommending! Great video once again.
We'll get there slowly but surely. Thanks for the support!
Your videos are top notch and entertaining.
its rarely a wasted effort when the end result is finished tools
Just found your channel and binged all your videos over the last couple days. For this one, and lots of your other tools that don't like rust, spray them with fluid film, then wipe off the excess after about 20mins.
Thanks for the tip! I use a product that I think is similar called ACF-50
8:15 NIVE!!! Good idea fixing the slots up!!
Nice to watch this on a saterday morning with a cup of coffee. Thanks!
Love to hear it. Thanks for watching!
You’re the man. Thank you.
I absolutely love this channel, i just inherited tools from my uncle he died on Tuesday 8/2/22 it’s bittersweet
Wow... so sorry for your loss. I hope his tools carry fond memories for you to remember him by. Thank you for the support
@@InheritanceMachining thank you for your condolences
I came to your channel to look for something else to show someone, and somehow realized I'd missed this video! A sort of blast from the past, because it's clearly of an older chronology in the life of your channel, and yet I'm still so glad to have picked this bit up. Dunno how I missed it in the first place, but, now I'm back up to speed! :)
10/10 you have some of the best home shop videos on YT right now. I'm glad you got the 246 blocks whipped into shape as well as the angle plate. Both are quite useful to have around, and now yours are in tip-top condition! It was a pleasure watching. FYI my vote is for longer less condensed videos, but I'll take what ever I can get 🙂
Wow thank you! I would 100% make these videos longer if I had the time! I spend just a long at the computer as I do in the shop 😂
If you like this Channel go check out This Old Tony. He is basically the godfather of home shop videos. You can tell Brandon watches his videos by the videos Brandon puts together. And, of course, the godmother BlondiHacks is evident in Brandon's videos too.
@@WmSrite-pi8ck Both very big inspirations for me personally!
I love the little edition to what you previously done and then added this in order to improve that, so its not just one project done and the next. Love watching it though, very satisfying.
They are usually all connected in some way, shape, or form 😁
Excellent workmanship
thank you!
Love your videos! Made me smile to hear 12mm referred to as 0.475"
😂 Thanks!
The quality of vids are insane, narration is soothing and quiet. That's a 10)
Thank you so much!
You truly are an improver of Fridays!
😁 I aim to please!
Every side project is a bonus .
😁
Watching this is very calming
Eventually I see you making precision tools like Robrenz and Ox Tools. Keep up the good work
Those guys amaze me. Thank you!
Oh my, each project gets even more satisfying to watch than the previous. I so have surface grinder envy 👌👏👏👍😀
Very nice work.
Thanks for sharing.
Take care, Ed.
Thanks Ed!
It's funny watching this video now. When you were fly cutting the face, I kept saying to myself "You have a precision machinist jack and a huge fly cutter already!" then I realized this video was before you made both of those.
Great videos, I started watching your channel since you started posting videos and I really like your content. As a fellow machinist myself i have learned some new tricks thanks to you. Keep up the great work.
That's great! I appreciate you following along
Damn this channel is getting more and more entertaining. Thanks for the videos my man!
Thank you so much!
A+ photography (and monologue).
Thank you!
It is so satisfying and relaxing to watch your videos. Thank you.
Much appreciated!
I love the format of the channel. Very interesting. I keep returning. Keep it up.
Thank you! Will do
The age old quest of chasing squareness
Man, you are therapeutic to watch.
good job..thanks for your time
thanks for watching!
I have very little knowledge or interest in machining, but your videos are so good I watched them all. There is something relaxing about them. I enjoy good problem solving.
I love to hear that. Thank you
You do nice work. Your Grandad would be proud! 😁
That sin plate be lookin crisp.
😎
Angle plates are hella useful on the mill so it's hardly a waste of time getting yours in fighting shape.
That's true! I've seen all sorts of setups on the mill
Exactly 15 minutes, nice!
Not on purpose but fits in a work break nicely 😉
Smooth, shiny, and square!
Such a high quality content, one of my favorite TH-cam channel, thank you for another video!
I really appreciate that! Thank you for following!
the marketing dept down at kurt are geniuses. lol. that logo makes every makers vid an advertisement for them.
If I could buy stock in a channel that I expected to grow, I’d yolo on yours. With this, style, content, and production quality, I really think the only limit is how much time you want to devote to it.
That's quite the endorsement. Thank you!
Thank you for sharing you’re amazing work
I gotta say i ADORE what you are doing, so glad you popped up in my recommended a few months ago and god yes, side project galore is bane of my existence too xD
😂 the side projects come with the territory! I appreciate the support and kind words! thank you!
Seriously enjoy your videos, how you process various problems, safe in the knowledge that you can fix it. Awesome. Well done sir! 🤘😎
Brother, am a fellow machinist myself operating various milling machines, but the way you are using conventional machines to machine accurately is mesmerising!
Keep up the good work!
Thank you!
I didn’t understand a word but what a beautiful machining results
😂 thanks!
Very nice. The chamfers were the most satisfying
😁 thanks!
Fascinating insights into precision. Thank you.
Outstanding!
This is mesmerizing. Thank you. Very good filming.
😁 thank you!
Looooooove the intro music...clean and crisp...
Wonderful stuff. As a non-machinist myself I’m learning a lot. I thought I understood the step method at first, it now I’m doubting.
You might consider adding Some 1/4-20 tapped holes on the ends for set up work. They come in handy if you need stops .
ooo, I may do just that. Thanks
Excellent work 👍👍👍 . Thank you for sharing. Take care of yourself, 🇨🇦
thanks!!
Always excited when these videos drop! Honestly the best machining channel on YT!
thank you so much! 😁
That is some very nice precision work. Thanks for sharing. Very satisfying.
Thanks, Bill!
Great channel! I like all of the side projects that come up. Story of my life when trying to get something done.
Thank you! I don’t think there is a person alive that doesn’t have this problem 😂
@@InheritanceMachining , Trust me, there are. LOL
NICE thanks for the video! I love tools to make tools to make tools videos!
Looks great, nice work!
THanks, man!
Dude I still can’t get over how beautiful that surface gauge turned out. I’ve been loving all of your videos too, they’re so good.
Thanks, man! I'm surprised how much I find myself using it too. Definitely the most worthwhile project to date.
Another great video. Just a tip. It’s usual to grind in 123 blocks at the same time to create a matching pair.
Thanks! Yeah I realized the missed opportunity. Ive got a lot more 123 blocks that need cleaning up though 😁
Wow! You are really good at machining!
This man would be lost in the world if the surface grinder hadnt been invented! hahaha. Really enjoyed the video as always! Thanks for uploading so frequently.
For real though! 😂 thanks for following along!
Another great video! Boy that surface grinder sure is handy!
Thanks! I use it basically any time I have the slightest excuse 😆
Odly satisfying, well done
Thanks!
One thing I've noticed about Evaporust is that, weirdly, brake cleaner doesn't do much to clean up Evaporust residue. Warm water actually works much better.
Like side project inception!
😂
Cast iron and leaded steel. My two favorite ferrous metals to machine. Also the two messiest. 12L14 machines like butter and can be parkerized (Brownells solution) to a beautiful matte black. Almost forgot. Thanks!
Cast iron is for sure messy! Also thats good info. What are the uses of 12L14?
Move over this old Tony. There is a new TH-cam machinist in town!! But seriously great work!! Thank you!! Look forward to the next one
I can't replace my inspiration! 😂 But seriously, to even be compared to ToT is an honor. Thank you!
Good stuff from what I saw, little tip for future reference, when using a surface grinder, keep the wheel on. The wheel will keep its concentricity stable and wont change your depth when moving. Although I get it, it can get freaky when setting up though.
Huh... I never would have considered that. It doesn't really freak me out to work around it running. I do it when dressing and other quick operations. Thanks!
That came out great👏
Thanks!
Pretty cool. I need to do this to one of my angle plates. if you don't already, Id recommend making up a set of aluminum or similar soft metal washers for when you clamp onto onto your 246 or other blocks, from what ive found even a properly hardened block will get "ring" marks from a standard hardware grade washer tightened under a nut or bolt. Once mine started getting marked up I made the switch.
Thats a really good idea. Thank you!
if ever an object begged for a bath in evaporust its that plate lol. that stuffs amazing.