Is the screen digitizer part of the frame? Mine has a cracked screen as well as a chipped corner and I was wondering if replacing the screen digitizer would cover both discrepancies?
They usually sell screen digitizer and frame combos, which comes as one piece all adhered together already but they also sell just screen and digitizer glass combos which you would have to heat up and pry your old screen from the frame and apply your new one back to your old frame with new adhesive.
Sir I have a question for you. I was changing the sim and I accidentally poked into the bottom hole and put pressure with the sim tool as the two holes are right next to each other. Would it damage the microphone in any way?
I'm having the same worry and was going through all the available details, videos and articles to see if sim ejector tool poking causes any damage to my microphone. Thanks for sharing the info here👍
Have you experienced any problems till now and is there any grill mesh around the microphone I don't remember if there was any and if I punctured it or not 😢
hey can you do bend test of op11 ? I've seen durability test video of yours for realme gt 2 pro and it actually survived whereas other channel managed to break it . I really like the op11 but 3 channels including jerryrig managed to crack the back glass can you atleast tell in the reply whether it's really that fragile like people complain of it breaking with no external pressure in forums?
Bend tests aren't accurate. Everyone's strengths can vary and from where they hold and bend can vary also. I don't think it's really that fragile, the only time you would have to worry is if you literally try to bend it like that or if it gets stuck under the seat of a car and you roll the seat back n forth and it gets stuck somewhere and bends. For normal use case scenario, you wont have to worry.
I ordered back glass replacement (w/o camera frame) for my Oneplus 11 since only the back glass was broken. Will the whole camera lens frame from my old backcome off if i apply heat or only the camera glass? Cause i need to replace the whole camera frame + glass on the new glass. Thank You!
I took off the back cover on the One Plus 10 pro because something was rattling, it turned out to be the camera stabilizer rattling when I shook the phone and that's normal. The back cover does not stick tightly. How to stick good the plastic back cover?
You would need to order a replacement pre cut adhesive made for the phone (which I don't see available online aside from sites I have never used before), or a replacement back with the adhesive pre installed like this one: www.ebay.com/itm/266164552527?hash=item3df8a4c34f:g:-xkAAOSwsVlkCYrl&amdata=enc%3AAQAIAAAA4EXdu%2Bn%2B4IR6XFHj6fy0vPVIvdpw6ec%2FO4vpuERWqh4bEY%2FC%2FztC8YzPeOLE9Zq9pfekoV9oVBiI%2FdDcaKsJNPp9psEgs113cAie8Fn5Ssq6jR7qQX6zanH0ao2HGoZv9Ar3vJGlC2XL7uYCitOMQrV85xW46%2BYzFmKcTG2%2Fz%2Bt5IhioxKyu8CcKqKkrj1rVQCqSK5ZKOc7z%2BBKo%2BkjRMVaSMV55nJHpCzF3uTW6RU7l7BDGZGyZYddsBFp%2Fvwq%2BkLFezVh8MZKpFxJhNSH%2BdLUi8bbrlIxbmUUFXfwXx87p%7Ctkp%3ABFBM-sqG7eJi
if just the back camera glass cover is what's broken then yeah, but if the camera itself is damaged you would have to replace the camera but most likely it's just the back cover glass and replacing the back battery door cover will solve your issue
I am not receiving signal in my phone though sim card is getting detected. Sim card working fine in other phones. What part need to be changed as software is not the solution?
My back side just cracked in a mid fall with a case on. Super fcking cheap I need to get another one. Anybody knows where I can find a back replacement? Thankfully is just the outer part
Thanks for the video, is so detailed. If I swap the C conector Flex cable for a generic, can I have the same quick charge? I bought a DAC cable C - 3.5mm for my onePlus to lisent to music with my wired headphones, now I feel that i will ruin the C conector of my phone😢
i thik u all teardown video makers are afraid of teardowning the poco x5 pro i thik it is stronger than your pry tools so even a single video is not present on the internet teardowning the poco x5 pro. i has been launched a month ago and the OnePlus 11 is launched just now and it's already taken apart. Shame😏
All those cameras hanging from the main board... disaster...and that battery of 5000 mah just 2 x 2500 mah combined in one body. How tf 1+ brand could pretend to be a competitor to Samsung, Huawei and Iphone? I would never buy such a phone after I saw how it has been compiled.
Was waiting for this video. Thank you so much for disassembling.
You're welcome :)
Quality content as Usual, A comparison with the 10 Pro would be nice like the one you did with the s23's & s22's. 🗽
Thank you. I don't have one on hand to do at the moment, or else would have considered it :)
@@PBKreviews hi could you do a honour magic 5 Pro
Is the screen digitizer part of the frame? Mine has a cracked screen as well as a chipped corner and I was wondering if replacing the screen digitizer would cover both discrepancies?
They usually sell screen digitizer and frame combos, which comes as one piece all adhered together already but they also sell just screen and digitizer glass combos which you would have to heat up and pry your old screen from the frame and apply your new one back to your old frame with new adhesive.
@@PBKreviews oh didn't know there was combos, thanks for the info 👍
Sir I have a question for you. I was changing the sim and I accidentally poked into the bottom hole and put pressure with the sim tool as the two holes are right next to each other. Would it damage the microphone in any way?
No the mic is much deeper inside that hole
I'm having the same worry and was going through all the available details, videos and articles to see if sim ejector tool poking causes any damage to my microphone. Thanks for sharing the info here👍
Me to do that
Have you experienced any problems till now and is there any grill mesh around the microphone I don't remember if there was any and if I punctured it or not 😢
@@masterbeast8840Hello, sorry, did you find out if any component or mesh at the microphone input broke?
What about water resistant could you say it's better than ip64
No. I accidentally went in a pool with mine and I've had some water ingress. Definitely can't be submerged
hey can you do bend test of op11 ? I've seen durability test video of yours for realme gt 2 pro and it actually survived whereas other channel managed to break it . I really like the op11 but 3 channels including jerryrig managed to crack the back glass can you atleast tell in the reply whether it's really that fragile like people complain of it breaking with no external pressure in forums?
Bend tests aren't accurate. Everyone's strengths can vary and from where they hold and bend can vary also. I don't think it's really that fragile, the only time you would have to worry is if you literally try to bend it like that or if it gets stuck under the seat of a car and you roll the seat back n forth and it gets stuck somewhere and bends. For normal use case scenario, you wont have to worry.
Pretty simple to change the back glass? I was thinking of doing a color swap from the native black
I ordered back glass replacement (w/o camera frame) for my Oneplus 11 since only the back glass was broken. Will the whole camera lens frame from my old backcome off if i apply heat or only the camera glass? Cause i need to replace the whole camera frame + glass on the new glass. Thank You!
What is the hole right next to the sim eject hole? I accidentally put the Sim card tool in that hole. Hopefully I didn't damage anything.
Its the microphone hole. You will be fine since both the filter and the microphone are seated above the hole.
@@PBKreviews good to hear. Thank you. I see now, there were a few other comments asking the same. At least I'm not the only one 😂🤣
@@PBKreviewscould you do Xiaomi 13 pro
I remember the disassembly of the OnePlus 10 Pro and sure it has the double of rubber gaskets in comparison with the 11... 👌
👍
Who else at first didn't like how the OP 11 looked but now likes the design
yeah, kinda grows on you.
Do I have to remove the main board to change the charging port flex cable?
Is the Carrier service antenna on this phone on the edges
From where can i buy a battery replacement for one plus 11 like the original or the original i tried to search but i didn't find any
Waoo excellent, now I can replace the back film of my OnePlus 11. Thanks a lot!!
you're welcome 👍
Yo quería saber cuál es el chip de audio que usa. Solo menciona las cámaras.
How much heat? I can't get mine to loosen up
is this have IP rating
not after its taken apart unless you use the original pre cut adhesive to re adhere the back.
I took off the back cover on the One Plus 10 pro because something was rattling, it turned out to be the camera stabilizer rattling when I shook the phone and that's normal. The back cover does not stick tightly. How to stick good the plastic back cover?
You would need to order a replacement pre cut adhesive made for the phone (which I don't see available online aside from sites I have never used before), or a replacement back with the adhesive pre installed like this one: www.ebay.com/itm/266164552527?hash=item3df8a4c34f:g:-xkAAOSwsVlkCYrl&amdata=enc%3AAQAIAAAA4EXdu%2Bn%2B4IR6XFHj6fy0vPVIvdpw6ec%2FO4vpuERWqh4bEY%2FC%2FztC8YzPeOLE9Zq9pfekoV9oVBiI%2FdDcaKsJNPp9psEgs113cAie8Fn5Ssq6jR7qQX6zanH0ao2HGoZv9Ar3vJGlC2XL7uYCitOMQrV85xW46%2BYzFmKcTG2%2Fz%2Bt5IhioxKyu8CcKqKkrj1rVQCqSK5ZKOc7z%2BBKo%2BkjRMVaSMV55nJHpCzF3uTW6RU7l7BDGZGyZYddsBFp%2Fvwq%2BkLFezVh8MZKpFxJhNSH%2BdLUi8bbrlIxbmUUFXfwXx87p%7Ctkp%3ABFBM-sqG7eJi
I have a stupid question, i accidentally dropped my phone and cracked my rear end camera, does replacing the back cover fix the broken camera as well
if just the back camera glass cover is what's broken then yeah, but if the camera itself is damaged you would have to replace the camera but most likely it's just the back cover glass and replacing the back battery door cover will solve your issue
Interesting the internals of the OnePlus 11 looks miles better than the s23 ultra 😅
lol dunno, I think the S23 Ultra looks better.
appreciate your stuff bro!
Thanks!
I accidentally put the sim tool in the microphone hole,did I damage anything? please help me...🙏🙏🙏
I also did the same thing
I am not receiving signal in my phone though sim card is getting detected. Sim card working fine in other phones. What part need to be changed as software is not the solution?
make sure your phone network bands are compatible with your carrier/sim network bands. Not all phones are compatible with every network.
I have a problem in my one plus 11,there are camera,sound and calling problem,
Is there anything happen in motherboard
It's possible. Can be from liquid damage or physical damage etc. Can also be software issues.
which SKU of this phone? From USA？
yeah its the global model
No 5g antennas?
Yeah it does. One is on the bottom left corner.
Nice work ❤ India 🇮🇳
Thanks!
Please make a video one plus 11r
Infinixzero ultra disassembly bro
My back side just cracked in a mid fall with a case on. Super fcking cheap I need to get another one. Anybody knows where I can find a back replacement? Thankfully is just the outer part
www.ebay.com/itm/354699852521?hash=item5295c23ae9:g:59MAAOSwSd1kLoqb&amdata=enc%3AAQAIAAAA8EbTkttyyrIOaBqbNrWGkOSDlOorI%2ForoAVpoVUVZ8Ho%2F%2F7ennkd%2F20MtqrzCud5ZA2ka7J%2FaIicEvlOCtUobZsT0W4M7zhInfmw3pacMMv69FiH3CBTPfo2DXUfbegsG2KNbUNLEup9%2Bt5neC0DyEcrF0%2FKc4mM0yUcDKGaw2B9bV3q2UyHnlt2WRNULMKemjKOhgWMX3aXpVf6yj9fvM95sCyk7Ob1y5Qr2daeeQTHpnAy2YQRIKWIdBw8w3aiLNZ0pJ5KUTYuJioGx6kQKUILFmiyh1bT1Y96ZXsF1c8GzsL%2BCzfrS1pj1byW81cK2Q%3D%3D%7Ctkp%3ABk9SR_qBwfr2YQ
where are the damn antennas , GSM, 4G and 5G, please show that mate...
Love from Bangladesh 🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩
👍 :)
Waiting for oneplus 11r teardown 😅
Could you do Xiaomi 13 pro
Hi, its been done by a few people already, so won't be worth spending the money on purchasing it when I won't get many views on it.
thankyou
👍
Wow wow wow wow wow wow
Make for OnePlus 12
Crazy
👍
Bro plzz give me the folder of this phone
After one month mobile touch screen automatically gone tochless
I don't keep the phones, I sell them after the videos.
Не знал, что жидкостное охлаждение это капля термопасты.
The liquid cooling they refer to is the vapor chamber which you can see @6:54 in the video
Thanks for the video, is so detailed.
If I swap the C conector Flex cable for a generic, can I have the same quick charge? I bought a DAC cable C - 3.5mm for my onePlus to lisent to music with my wired headphones, now I feel that i will ruin the C conector of my phone😢
Nice
👍
good
It's nice
👍 :)
2hrs late 😅✌
haha :) ✌
I know it has no official IP rating, but would you say it has some water resistance?
Splash only
400,
i thik u all teardown video makers are afraid of teardowning the poco x5 pro
i thik it is stronger than your pry tools so even a single video is not present on the internet teardowning the poco x5 pro.
i has been launched a month ago and the OnePlus 11 is launched just now and it's already taken apart.
Shame😏
Poco isn't a mainstream phone on everyone's radar, that's why no one has done it yet.
I actually uploaded the video yesterday :)
@@PBKreviews i have seen it and liked and shared it❤️
OnePlus Fold looks good from inside
haven't seen it yet, will have to check it out.
All those cameras hanging from the main board... disaster...and that battery of 5000 mah just 2 x 2500 mah combined in one body. How tf 1+ brand could pretend to be a competitor to Samsung, Huawei and Iphone? I would never buy such a phone after I saw how it has been compiled.
They do 2 batteries to charge faster. It has the same capacity as one battery. Lol you make no sense
Lol bro update ur info 2 batteries needed to charge fast
A little knowledge is a dangerous thing 🤣🤣 this kid don't know what he's saying
Sounds like you thought you knew what you were talking about but you really didn't.
Please do a droptest so we can all see how shitty this phone is. The back will crack if you drop it from 10 cm