STM/20-356 Slide On Camper

STMA/20-356
Manufactured with StyroRV/RG+ 29mm Fibreglass Composite Panels.
The dimensions are 5700mm (l) x 2400mm (h) x 2200mm (w).
PLEASE: For pricing inquiries PM us through Facebook or our website and quote the STM # as we will never disclose the price of our clients build via social media. Each build is unique, so contact us to discuss your requirements.
This customer sent us through an initial hand-drawn sketch for their slide on camper.
From that hand draw sketch, StyroMAX produced 3D CAD to bring the sketch to life!
This customer has used:
*StyroRV/RG+ CNC cut 29mm Fibreglass Composite Panels
* StyroMAX proprietary panel inserts
*StyroMAX proprietary STYROSEAL/LT for the bathroom door
*StyroFloor/HD
*StyroBOARD/RG for internal cabinetry
*StyroTRIM/RV for the external body trim
*Teroson MS939 adhesive
Subscribe now
• www.youtube.co...
For more information, check us out
• www.styromax.c...
• / styromaxcompositepanels
StyroMAX is a leading manufacturer of composite fibreglass panel in Australia.
We are based out of Darra in South East Queensland.
StyroMAX produces a number of high-quality components direct to many established manufacturers Australia wide. Due to our high build standards and durable product we can offer a solution that fits with your warranty conditions and quality assurance standards.
Some of the services and products we offer manufacturers are:
• Faster construction time. (No complex timber or steel frames required)
• Reduced body weight. (Due to lightweight composite panelling)
• Impact-resistant panelling. (Due to the use of FRP sheeting)
• High gloss FRP sheeting to both faces of panelling.
• Corner trims and service door trims.
• Internal panel conduits. (For cable routing)
• Repetitive manufacturing.
• Fast production turn-around. (Trade priority)
• CAD production drawings. (Via 3D solid modelling)
• CNC cut panels. (2 x 14.5mtr x 3.5mtr and 1 x 9mtr x 3.5mtr CNC profile cutting centres)
• Full back-up and support. (Accident repair gel coat always available)
StyroMAX offers a number of solutions for the Do It Yourself enthusiast.
Here are some of the reasons why StyroMAX panels and products are great
for a DIY solution:
• Full flat-pack panel set for your rolling chassis.
• Easy construction. (No complex timber or steel frames required)
• Reduced body weight. (Due to lightweight composite panelling)
• Impact-resistant panelling. (Due to the use of FRP sheeting)
• High gloss FRP sheeting to both faces of panelling.
• Corner trims and service door trims available.
• Internal panel conduits. (For cable routing)
• Entry doors, service doors and windows available.
• 3D solid modelling of your sketches. (See your plans come to life before you construct)
• CNC cut panels. (2 x 14.5mtr x 3.5mtr and 1 x 9mtr x 3.5mtr CNC profile cutting centres)
• Teroson MS939 by Henkel. (Construction adhesive for your build)
• Full back-up and support. (Accident repair gel coat always available)
Subscribe now
• www.youtube.co...
For more information, check us out
• www.styromax.com.au
• / styromaxcompositepanels

[@TheHuriwaiWhanau]

Hi. What are the struts you used to keep your camper off the ground for the transition on to you can tray? Tia

[@kkz2dgz]

How Much?

[@fazbhatti9436]

What's the cost ?

[@andyg9991]

Thats is one SERIOUSLY impressive build and very good use of space. What is the floor finish the the stone-like finish next to the double bed with the lights? Thanks

[@abovethefog1016]

Well done and congrats on reaching the finish line. Lockdowns do have their positive sides. Q: did you have any GVM surprise about the camper weight? Also, we have fitted same RT legs from Palamino (sp?). Heavy but very necessary in bad weather etc. Where are you gonna stash them for travel. We don't plan on removing our camper unless its a good idea such as for Fraser Is. or if needed for mech work. So we will have them inboard nr the floor. A PITA but I have not come up with an alternative and I have tried..

[@gregfoord5784]

I saw that the camper uses a frame onto which the panels are mounted. Is this absolutely necessary or is it possible to design the panels/box to be self supporting?

[@StyroMAXInsulatedPanels]

To create the structural strength, we recommend bonding to a sub frame, similar to creating a monocoque. We do not recommend not having a frame.

[@ronmiddleton7886]

Nice work, well done