Hi PP, I thought I would share my own experience using the UCK1 display. In the system settings auto assist means that if you are in say gear 1 on a flat surface and suddenly you start to go uphill, it will increase the gear level to match. This has nothing to do with peddle assist.
SORRY DANNY FOR ANOTHER ? In system setting. #1 what is auto assist on/off mean? #2 drive mode-both what's this mean? Thx again brother, it's very much appreciated
Yeah shows voltage which is superior to battery % and bars. Seeing voltage allows you to know exactly how much battery you have left if you know what the voltage means. 48v battery = 54.6v is 100%, 47v is 50% and 40v is 5% when you should really stop and start charging the battery back up.
came across your videos one day and it changed my life! your tattoo videos have been really motivational/inspirational & have helped me come out of a dark time in my life! I really appreciate you and your content! since coming across your videos last year, I've gotten myself up and running as a up coming private tattoo artist! I think it would be cool to wing a give away from Daniel Yuck himself!! have a good day man, good vibes from California!
Hi! What do I have to do to really see my battery info data on the "Battery" page? The instructions from the display say: The battery must support this function. But how do I integrate this function into the battery that I am about to build? Do i need an special BMS ?
Yes if the controller allows a data cable from the BMS you need a special BMS that has an extra wire that communicates with the controller. Many displays have that option, but most controllers don't have the data port for it.
It might be the hall sensor communication from the controller to the motor.. switch the three color wires (green, yellow, blue) to get the right polarity!
Hi can you help? How do i save my settings because when i switch off the display and turn it back on again it loses the settings i made and just goes back too 72 volt and 24 inch wheel so my settings wont save?
I have same problem..all gone. It think the display doesnt have internal battery to memorize saved setting. I think, if you want the display to memorize saved setting, you have to switch off the bike via the display off/on button only and not from battery main switch- Otherwise all setting gone. I hope this help.
Hello, i have a very serious question. Is it possible to adjust the maximum speed? And the power of the motor? (in advance Setting?) Like limiting the speed to 20 km/h? And limited the power of the motor to 1000W? (3000w to 1000w) (for example) make some kind of electronic clamping. Thx =)
@@PedalPeasants I'm confused by your response, in this video you show going into advanced where there is clearly amp and speed limits available to adjust. What do you mean?
I think settling can be done via mqcon app. The problem is all my setting was reset after i disconect the battery. Eg. My bike speed limit is 99km/hr. .after disconect battery it shows 60km/hr.
Yes speed limit can be turned down in advanced settings and for watts you want to turn downs the amps for that. You take volts times amps = watts output. A 48v battery fully charges to 54.6v. 54.6v X 22a = 1201 watts output.
I just notice again, ( I have watched this 4 times). Advanced setting yours are WAY LOWER THAN MINE : yours/min #1 speed 99/150 km/h, #2 current limit 40a/50a, which is alot.
@@PedalPeasants any idea I built mine myself and since the unit functions and reads battery I know black and red are working and my yellow and green are connected what else could it be?
Hi PP, I thought I would share my own experience using the UCK1 display.
In the system settings auto assist means that if you are in say gear 1 on a flat surface and suddenly you start to go uphill, it will increase the gear level to match.
This has nothing to do with peddle assist.
How to enable cruise control in UKC1? In 99% of ebikes, it is enough to hold the minus or down arrow button for 3 seconds
This UKC1 display look like he's gonna be realy helpfull. It's a nice thing to have. 👍
SORRY DANNY FOR ANOTHER ? In system setting. #1 what is auto assist on/off mean? #2 drive mode-both what's this mean? Thx again brother, it's very much appreciated
I am very curious to know what is the second display
does it show current battery voltage level? or only percent of battery? thanks for your time
You can choose
Yeah shows voltage which is superior to battery % and bars. Seeing voltage allows you to know exactly how much battery you have left if you know what the voltage means. 48v battery = 54.6v is 100%, 47v is 50% and 40v is 5% when you should really stop and start charging the battery back up.
My display constantly shows 100 percent, even on a dead battery before turning off 100 percent! How can I solve this breakdown?
@@ВованМоряк-у5щ is the display set to match the battery volts? 48v, 52v, 72, ect
My battery is at40%. I gave the bike a bit of juice and looked and it read 8% then changed back to40%
Do you know what is the problem plese?
How do you adjust power for each of the pedal assist levels? I want level one to be less power than it is.
Thanks
Hi, do you know how to customize the speed of each of the assistance levels? Thank you
Where it said RT speed, mine goes to 19.2 with my acceleration all the way up, I'm just trying to find my speed ?
Limiting the speed doesn't work for me.
came across your videos one day and it changed my life!
your tattoo videos have been really motivational/inspirational & have helped me come out of a dark time in my life!
I really appreciate you and your content! since coming across your videos last year, I've gotten myself up and running as a up coming private tattoo artist!
I think it would be cool to wing a give away from Daniel Yuck himself!! have a good day man, good vibes from California!
If I lower the current limit value, what happens?
Also am what is p1 up to p5?
Is there a way to reset your average speed and your top speed? I would like to know after every charge what these are.
Yeah , click the + and - buttons at the same time
@zacdawson6881 thanks for getting back. I finally figured it out by randomly pushing buttons. Lol
Do you have the software to update the display and change the boot up logo screen?
Hi! What do I have to do to really see my battery info data on the "Battery" page?
The instructions from the display say: The battery must support this function. But how do I integrate this function into the battery that I am about to build? Do i need an special BMS ?
Yes if the controller allows a data cable from the BMS you need a special BMS that has an extra wire that communicates with the controller. Many displays have that option, but most controllers don't have the data port for it.
System setting - "SystemVoltage" :48v/52V/UBE. What does UBE stand for?
i have a problem with my ebike, its a 52v battery and 3000w , but only works for 2 seconds makes a sound and stop woriking. any ideas?
It might be the hall sensor communication from the controller to the motor.. switch the three color wires (green, yellow, blue) to get the right polarity!
how to reset trip?
Mine started as kilometers how do you change it to mph
Hi can you help? How do i save my settings because when i switch off the display and turn it back on again it loses the settings i made and just goes back too 72 volt and 24 inch wheel so my settings wont save?
I have same problem..all gone. It think the display doesnt have internal battery to memorize saved setting. I think, if you want the display to memorize saved setting, you have to switch off the bike via the display off/on button only and not from battery main switch- Otherwise all setting gone. I hope this help.
what does the current limit do?
Is this display compatible with 52v batteries?
Yes 👍
How do you reset odometer back to 0?
How do you change it mph
How do you find out how fast your going?
Hello, i have a very serious question.
Is it possible to adjust the maximum speed? And the power of the motor? (in advance Setting?)
Like limiting the speed to 20 km/h?
And limited the power of the motor to 1000W? (3000w to 1000w)
(for example) make some kind of electronic clamping.
Thx =)
@@PedalPeasants I'm confused by your response, in this video you show going into advanced where there is clearly amp and speed limits available to adjust. What do you mean?
I think settling can be done via mqcon app. The problem is all my setting was reset after i disconect the battery. Eg. My bike speed limit is 99km/hr. .after disconect battery it shows 60km/hr.
Yes speed limit can be turned down in advanced settings and for watts you want to turn downs the amps for that. You take volts times amps = watts output. A 48v battery fully charges to 54.6v. 54.6v X 22a = 1201 watts output.
I have the same display and if i Change the speed Limit is dosent work i Set it to 45kmh and is still drives 120kmh pls help
same here :/ I'll test it out some more tomorrow@@themadrussakakamaxim8137
I just notice again, ( I have watched this 4 times). Advanced setting yours are WAY LOWER THAN MINE : yours/min #1 speed 99/150 km/h, #2 current limit 40a/50a, which is alot.
Hey, do you know what Error 50H means on it?
Depends on which protocol matches
What is throttle PWM and start mode options in advanced settings?
@@PedalPeasants thanks for the response!
Mine is km how do u change to mph?
Did you get answer on your questions? I also wonder the same aboute the start mode
PWM controles the throttle sensibility and the "start mode" is the gear you will be at when you turn your bike on
Does someone knows the advanced settings password for the Ukc1 plus ?
1801
Hello, nice vedeo. Can we change the language ? Thanks
How do I change milage and speed to kilometers?
Thank you.
I'll be waiting
@@wandanamale9632 It's under system, choose metric or imperial
how to fix error 30 h
its pre made from the factory
@@PedalPeasants any idea I built mine myself and since the unit functions and reads battery I know black and red are working and my yellow and green are connected what else could it be?
I have the same issue. It worked for a few days. Then suddenly started to give error 30h
error password
tipptopp
What does the advanced settings mean? 🥹 cannot find anyone that explains them, NOT even the manual?
IKR! Trying to figure out the pole number thing… nothing! Good luck
How to reset odo.