That tail suits it so well. What an awesome build all round Great to see that you take all the lessons learned on previous bikes and apply it to new builds. Constant growth 👌
Absolute magic. Could never justify the cost of one of these builds, (not a criticism, just an observation based on an hour of my labour) but this particular one is brilliant. A lot of the time they leave me a bit meh' but that is because each is built for a particular individual and its what he/ she/ they want. Fucking magic.
Great work. I have been dreaming of a bike like this. For me twin round front headlights with grills and extra fuel space under the seat with a Mad Max aesthetic would be perfection. The retro and modern mix with the sharp racy tail is so well executed.
This looks insane man. Watching wide of the mark inspired me so much I bought a Suzuki gn ‘93 in crates for a steal and have been building it by myself with a little help from a bike mechanic, another week or two and it’ll be ready to ride…have loved every step of it, as frustrating as some of it has been..being my first bike haha So stoked Cheers!
Great looking sporty. Looks really racey and very slick. Hot pipe 👍 Great sounding bike. The bars and mirrors and tank look good riding along. Looks like a fun twisty road 😃
What has caught my ears and eye is that these HD Sportsters are had between $2500 and $3500 and to build it out is very In-expensive mostly chasing down parts that someone else has done. This bike is expensive, but gives me ideas as I look at this. I own several adventure bikes already.
@@PurposeBuiltMoto Dig it!! She looks it. I have both my Streetglide and Dyna LRS built for ripping from suspension, brakes and motor. Love to take that one for a rip through my favorite So Cal twisties! Great job on it!! 👍👍
This thing is incredible man! Just wanted to ask, the bolts that hold in the carb are also breather bolts to release crankcase pressure; are you routing that some other way? Just to make sure you dont have problems down the road. But honestly your builds are way too clean. Really refreshing to see something so different to what everyone else is doing with these. Have an 03 and absolutely love it. Cheers from Puerto Rico & keep killing it man!
Thinking about combining the forward portion of your filter system. Relocate switch and coil. But could a standard filler box be worked into the system? Remove the filter, remove the standard intake, narrow the outside face of the box sits further in. The local brains trust say it would ruin the air flow into the throttle body (2013 883). I've swapped to a Supertrapp exhaust and now I can't help but notice how much the air box sticks out. I like your idea but maybe there is a more stylish was to connect to the throttle body.
No, there was a bit of fitting required. Nothing we couldn't handle though, not too difficult. If you're heading into a USD fork swap, check out this article we wrote to help people out. purposebuiltmoto.com/motorcycle-usd-fork-swap-everything-you-need-to-know/
Where is the kickstand? Is it really all that practical to build an off road motorcycle without having to drag around a back wheel support stand? Or am i missing the part about a kickstand modification for the added ground clearance?
The bike has a side stand. Something is insignificant as lengthening a side stand doesn’t really warrant a mention on a job like this. That’s why it’s not talked about.
You guys make awesome bikes, but your videos are boring. This one is typical, where you have 5 minutes of GoPro footage of the bike traveling on boring roads. You should at minimum have a hard acceleration, from stop, through at least a few of the gears. Also, show some snap accelerations from low to mid cruising speeds.
This thing is incredible man! Just wanted to ask, the bolts that hold in the carb are also breather bolts to release crankcase pressure; are you routing that some other way? Just to make sure you dont have problems down the road. But honestly your builds are way too clean. Really refreshing to see something so different to what everyone else is doing with these. Have an 03 and absolutely love it. Cheers from Puerto Rico & keep killing it man!
Want more from the 1998 Harley Sportster Scrambler build? Check out the PBM blog here purposebuiltmoto.com/harley-sportster-scrambler-2/
I thought this was an actual Harley Reveal and I got so excited. Idk why they haven’t jumped on the scrambler craze.
We probably make em look better anyway haha
What a badass build. Keep on keeping on!
That tail suits it so well. What an awesome build all round
Great to see that you take all the lessons learned on previous bikes and apply it to new builds. Constant growth 👌
Cheers Pat, Hoping we can build another one of these soon!
Absolute magic.
Could never justify the cost of one of these builds, (not a criticism, just an observation based on an hour of my labour) but this particular one is brilliant.
A lot of the time they leave me a bit meh' but that is because each is built for a particular individual and its what he/ she/ they want.
Fucking magic.
Thanks, it’s nice to hear someone that understands the process of these projects, and the cost involved.
Great work. I have been dreaming of a bike like this. For me twin round front headlights with grills and extra fuel space under the seat with a Mad Max aesthetic would be perfection. The retro and modern mix with the sharp racy tail is so well executed.
Absolutely sick build mate. Dream job!
It definitely commands a bit of attention
Man…I love this build!!!
This looks insane man.
Watching wide of the mark inspired me so much I bought a Suzuki gn ‘93 in crates for a steal and have been building it by myself with a little help from a bike mechanic, another week or two and it’ll
be ready to ride…have loved every step of it, as frustrating as some of it has been..being my first bike haha
So stoked
Cheers!
Hell yeah mate, get after it!
That's an amazing build!!!
Great looking sporty. Looks really racey and very slick. Hot pipe 👍 Great sounding bike. The bars and mirrors and tank look good riding along. Looks like a fun twisty road 😃
What has caught my ears and eye is that these HD Sportsters are had between $2500 and $3500 and to build it out is very In-expensive mostly chasing down parts that someone else has done. This bike is expensive, but gives me ideas as I look at this. I own several adventure bikes already.
Such a sick build!
So badass!!! Thats a Sporty Id love to rip on! Great job! 👍👍
She’s a ripper!
@@PurposeBuiltMoto
Dig it!! She looks it. I have both my Streetglide and Dyna LRS built for ripping from suspension, brakes and motor. Love to take that one for a rip through my favorite So Cal twisties! Great job on it!! 👍👍
Well done
This is fire congrats guys !!
Yew yewww! 👌🏽
Super badass vtwin supermoto. Send this video hd...
Impressive 😮
This is sick mate 🔥
This thing is incredible man! Just wanted to ask, the bolts that hold in the carb are also breather bolts to release crankcase pressure; are you routing that some other way? Just to make sure you dont have problems down the road.
But honestly your builds are way too clean. Really refreshing to see something so different to what everyone else is doing with these. Have an 03 and absolutely love it. Cheers from Puerto Rico & keep killing it man!
Hey Carlos, Yes the breather hoses are routed up under the tank and run out to near the chain. Appreciate you checking this out!
No bark busters! lol
Great looking bike. What handle bar risers did you guys use?
Very nice! What did you do to accommodate the geometry of the chain with the taller rear suspension?
Check out our Sportster build series and Blogs on this bike. All the build info is in there.
Great job!!!
Did the forks fit without modification to the headset
Modified headstem mate bit a pretty easy fit
@@PurposeBuiltMoto cheers thanks
Was it just different barrings or dis you have to cut and we'll a new head 🤔
Yeah I’d have that too man stop building cool stuff I want aye I can’t buy em all hehe merry Christmas guys cheers
Thanks Tazy, have a good Chrissy mate!
Thinking about combining the forward portion of your filter system. Relocate switch and coil. But could a standard filler box be worked into the system?
Remove the filter, remove the standard intake, narrow the outside face of the box sits further in. The local brains trust say it would ruin the air flow into the throttle body (2013 883). I've swapped to a Supertrapp exhaust and now I can't help but notice how much the air box sticks out.
I like your idea but maybe there is a more stylish was to connect to the throttle body.
If you figure out s better idea I'd love to see it. Our airflow was spot on with the bike running good HP numbers and great throttle responce.
Did the triples just bolt on
No, there was a bit of fitting required. Nothing we couldn't handle though, not too difficult. If you're heading into a USD fork swap, check out this article we wrote to help people out.
purposebuiltmoto.com/motorcycle-usd-fork-swap-everything-you-need-to-know/
Where is the kickstand? Is it really all that practical to build an off road motorcycle without having to drag around a back wheel support stand? Or am i missing the part about a kickstand modification for the added ground clearance?
The bike has a side stand. Something is insignificant as lengthening a side stand doesn’t really warrant a mention on a job like this. That’s why it’s not talked about.
What's the wet weight on this, and how much did it cost to do?
molto carina........🤟
Harley Davidson are u paying attention!?
Love it. Killed it again boys.
Peep my Sportster Board Tracker build?
th-cam.com/video/k_Cn6dsLBy4/w-d-xo.html
Research counter steering, u like many don't understand it. No disrespect, the #1 reason ppl wreck in curves...
The TH-cam music greatly diminishes this extraordinary build. Please turn that shit off.
It’s cool but it’s ugly
You guys make awesome bikes, but your videos are boring. This one is typical, where you have 5 minutes of GoPro footage of the bike traveling on boring roads. You should at minimum have a hard acceleration, from stop, through at least a few of the gears. Also, show some snap accelerations from low to mid cruising speeds.
Thanks for the feedback, I might try work a bit of that in. I just don’t really like thrashing the ass off my clients bikes haha
This thing is incredible man! Just wanted to ask, the bolts that hold in the carb are also breather bolts to release crankcase pressure; are you routing that some other way? Just to make sure you dont have problems down the road.
But honestly your builds are way too clean. Really refreshing to see something so different to what everyone else is doing with these. Have an 03 and absolutely love it. Cheers from Puerto Rico & keep killing it man!