How to Configure Analog Input-Output of Delta DVP PLC on ISPSoft
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- analog input signals (voltage or current) and convert them into 12-bit digital signals. DVP06XA-S receives 2 groups of 12-bit digital data from the PLC MPU and converts them into 2 points of analog signals for output (in voltage/current).
The user can select voltage or current input by wiring. Range of voltage input: +-10VDC (resolution: 5mV). Range of current input: +-20mA (resolution: 20uA).
The user can also select voltage or current output by wiring. Range of voltage output: 0V ~ +10VDC (resolution: 2.5mV). Range of current output: 0mA ~ 20mA (resolution: 5uA).
_________________________________________________________________
Fair Use Disclaimer:
For Bangladeshi Contents:
This channel may use some copyrighted materials without specific authorization of the owner but the contents used here fall under the “Fair Use” as described in The Copyright Act 2000 Law No. 28 of the year 2000 of Bangladesh under Chapter 6, Section 36, and Chapter 13 Section 72. According to that law, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational, or personal use tips the balance in favor of fair use.
For USA Contents:
This channel may use some copyrighted materials without specific authorization of the owner but the contents used here fall under the “Fair Use”
Copyright Disclaimer under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational, or personal use tips the balance in favor of fair use.
_________________________________________________________________