How I stack dimes with the titanium flux 125

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ต.ค. 2024
  • In this video I give a brief explanation of how I manipulate my weld puddles with the titanium flux 125 thanks for watching please like comment and subscribe
    #titaniumflux125 #practice #welding##practice #fluxcore

ความคิดเห็น • 175

  • @PJ-ee5mc
    @PJ-ee5mc 4 หลายเดือนก่อน +3

    This was so helpful! You are a natural born instructor and great welder. Many thanks for sharing your skills.

    • @26feironworks79
      @26feironworks79  4 หลายเดือนก่อน +1

      Hey.
      Thanks for the comment and the view and the compliment much appreciated

  • @INKJAX
    @INKJAX ปีที่แล้ว +26

    i found with this machine if you pull your bead and push back in a bit, ( not a crescent ) you leave less flux in the path and a cleaner bead. these do tend to do better with a bit more heat and it keeps the machine running smooth. too little heat and it tends to splatter a lot more... they also like really clean surfaces... like stupid clean works really good... keep it up. youre helping a lot of the new guys learn fast !

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว +2

      Hey thank you so much for the positive words of encouragement it's nice to know that I'm helping people out Thank you again God-bless and have a very safe and happy New Year

  • @jkgkjgkijk
    @jkgkjgkijk ปีที่แล้ว +9

    Natural born welder. It's intuitive and you got it! No books needed for FCAW or MIG

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Thank you for the kind words my friend I hope you have a safe and happy Thanksgiving

  • @southerncross179
    @southerncross179 ปีที่แล้ว +7

    I just purchased the titanium 125. I'm learning how to weld. Thanks for taking time to teach your craft.

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว +4

      Hey thanks for the comment much appreciated just buy lots of extra wire and get a scrap piece of metal and just practice running beads thanks again

  • @tonycatano1191
    @tonycatano1191 ปีที่แล้ว +3

    So far this was one of the most helpful tips on how to weld I found it most helpful thank you

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Hey thanks for the compliment much appreciated hope it helps And you're able to build some cool stuff

  • @9Antonian
    @9Antonian ปีที่แล้ว +4

    I use the tack method for thin gauge metal less heat no burn through situations, thanks for the video!

  • @jessewatkins7615
    @jessewatkins7615 2 ปีที่แล้ว +12

    Great video! This is exactly what I've been waiting on you to do. I finished my first welding project a few weeks ago, thanks to your videos for giving me the confidence on the Flux 125!

    • @26feironworks79
      @26feironworks79  2 ปีที่แล้ว +2

      Happy to do so my friend glad I could help stay tuned for more stuff to come thanks again

  • @benrussell2400
    @benrussell2400 ปีที่แล้ว +6

    This was such a great video. Thanks for showing the technique with the marker beforehand. It was really helpful to understand before you laid down the welds. Terrific!

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Hey thanks for the Compliment Much appreciated Be blessed

  • @jimmyhall1903
    @jimmyhall1903 ปีที่แล้ว

    Just a comment from one of your subscribers, been welding at my new job full time and this is one of videos along with many others that I think of when I'm doing work along as getting better at what I'm trying to to thanks again and keep me coming...!

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Hey thanks for the positive comment and the support it is much appreciated. I will try to get more stuff out as time permits and my work schedule permits. If there are any types of reviews that you would like to see or products you would like to see reviews that are within reason. Let me know thanks.

  • @otowncolby
    @otowncolby ปีที่แล้ว +6

    You're a great teacher. The demonstration with the marker helped a lot too. Thanks!

  • @CaptainGnarkill
    @CaptainGnarkill 7 หลายเดือนก่อน

    This helps a lot! Trying to dial in my skills. I really appreciate this

    • @26feironworks79
      @26feironworks79  7 หลายเดือนก่อน

      Hey thanks man much appreciated

  • @billjue1753
    @billjue1753 10 หลายเดือนก่อน

    Thanks for a great video, quick and to the point. Very considerate of other people's time. God bless.

  • @rickrangel
    @rickrangel 5 หลายเดือนก่อน

    26Fe Ironworks I am a beginner when it comes to welding. The 3 techniques you explained and demonstrated are beyond amazing. I have not come across a video that explains it like you have. Thank you for the tips on the 3 technique, you are ABSOLUTELY AMAZING!!! Rick

    • @26feironworks79
      @26feironworks79  5 หลายเดือนก่อน

      Thanks for the kind words and the support much appreciated.

  • @philiproell7176
    @philiproell7176 9 หลายเดือนก่อน

    Appreciate this video. It helped me in getting started with my titanium 125. Thanks again!!

    • @26feironworks79
      @26feironworks79  9 หลายเดือนก่อน

      Thanks for the comment and the view much appreciated. I hope you have a very happy new year

  • @CarlosGonzalez-ro2ow
    @CarlosGonzalez-ro2ow 10 หลายเดือนก่อน

    Currently learning Welding in College and when I took flux core I hated not being able to get good looking welds. But your welds have to be the best flux core welds I’ve seen thank you now I use my Harbor Freight flux core welder😂😂

  • @BetterToDIY
    @BetterToDIY ปีที่แล้ว

    Best instructional video ever on welding techniques

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว +1

      Hey thanks for that much appreciated I hope that it is able to help you with projects that you have so they turn out great thanks again

  • @nomoreblahblah
    @nomoreblahblah 4 หลายเดือนก่อน +1

    Good video. I bought the same welding machine from HF. I'll practice using scrap metal and eventually come close to what you showed in the video. Thanks. I liked and subscribed

    • @26feironworks79
      @26feironworks79  4 หลายเดือนก่อน +2

      Hey, thanks for the comment and the view much appreciated. I use this welder regularly off and on since I produced that video. And I have 0 complaints for something that you can purchase off-the-shelf. I highly recommend it.

  • @oggarage3459
    @oggarage3459 3 หลายเดือนก่อน

    Great tips, my friend, i own a mig 140 and am trying to learn how to weld. So far, I am getting better, i think. Subscribed to your channel. Thanks

    • @26feironworks79
      @26feironworks79  3 หลายเดือนก่อน

      Hey, thanks for that much appreciated.
      Be safe and have a great weekend

  • @azrael771
    @azrael771 ปีที่แล้ว

    Thanks for your detailed explanation of techniques here, i am learning and found this very helpful

  • @daiiahi3403
    @daiiahi3403 ปีที่แล้ว +1

    I like the second method. Less motion or movement. For me it equates to being a lot more stable with my hands. Good video.

  • @donaldmatthies6026
    @donaldmatthies6026 2 ปีที่แล้ว

    So I drove 360 miles round trip and just picked up a titanium flux 125, Vulcan Arc safe helmet, extra .30 &
    .35 tips, leather gloves,400 amp ground clamp, get home going to set it up,.... And no wire came with the machine. Thank you for taking time to film, edit and post this video

    • @26feironworks79
      @26feironworks79  2 ปีที่แล้ว +1

      I don't know where you live but I hope that you can hear me slapping my forehead for you

    • @26feironworks79
      @26feironworks79  2 ปีที่แล้ว +1

      Hey if you wind up ordering wire there is a company called Washington alloy I have been using their products I haven't had a chance to make a video yet but it is great stuff

    • @donaldmatthies6026
      @donaldmatthies6026 2 ปีที่แล้ว

      @@26feironworks79 I live in South Dakota. No worries the new machines don't come with, wire, or the slag hammer/chipper.

    • @donaldmatthies6026
      @donaldmatthies6026 2 ปีที่แล้ว

      @@26feironworks79 thank you for that heads up information, I'll look into the company. I think I'll go to runnings or tractor supply company and just pick up a small 2lb roll of .30 flux core wire to get started. I'll definitely keep Washington alloy in mind for later use when I get good at welding

    • @richardvillanueva8786
      @richardvillanueva8786 ปีที่แล้ว

      😂🤠

  • @billsturm7178
    @billsturm7178 11 หลายเดือนก่อน

    useful - heck yeah - you taught me how to weld and im dam happy - THANK YOU !!

    • @26feironworks79
      @26feironworks79  11 หลายเดือนก่อน

      Hey, thanks for the comment and the view and the compliment. It means a lot to me thanks again build some cool shit 😁

  • @GingerBeardMan_
    @GingerBeardMan_ ปีที่แล้ว +2

    Great video and explanation, just subbed. I picked up a titanium 125 today, first time welding/practicing will be this weekend. Your videos have been really helpful and you do a great job of visually and verbally explaining the concepts. Thanks for posting

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว +1

      Thanks brother much appreciated. Apologize that I haven't. Gotten much contentout. Recently i've just been buried with life and work thanks again

    • @GingerBeardMan_
      @GingerBeardMan_ ปีที่แล้ว

      @@26feironworks79 No worries, I can definitely relate and I have plenty of your older videos to catch up on too. I think you really have a gift for explaining things, keep up the great work and I'll have notifications on for whenever you put out the next one

  • @terrycapehart6303
    @terrycapehart6303 ปีที่แล้ว

    Lol, you are a hard working Man, never stop learning, have a blessed day América.

  • @mojo_plasma
    @mojo_plasma 8 หลายเดือนก่อน

    Great info!! Question... do you have your gun wired to Positive or gun to Neg? Thanks! Have a great day!! I've heard others speak about Wiring gun to Negative if ONLY using none gas Flux Core.

    • @26feironworks79
      @26feironworks79  8 หลายเดือนก่อน

      Hey, great question. I have not messed with the polarity of my machine at all. It is bone stock One thing that I have noticed and has made a huge difference for me is different qualities of wire. I've had very good luck with the Lincoln NR211.030 wire from Home Depot, and also, I have had very good luck with The Wire from KT Industries. I think it is it available at Ace Hardware? Thanks again

  • @timzen9510
    @timzen9510 ปีที่แล้ว

    Bro im new to welding and you just helped me out alot. thanks for sharing your knowledge and amazing skills, i will show this to anyone i know who is green like me.

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Thanks man that means a lot to me much appreciated hopefully. I will try to get some more stuff out that is relevant as soon as possible If you could help me out with subs too. That would be awesome be blessed and thanks again.

    • @timzen9510
      @timzen9510 ปีที่แล้ว

      @@26feironworks79 you are very welcome bud. I'll definitely subscribe and and I'll tell my friends to do the same when they watch it.

  • @jamesward5721
    @jamesward5721 ปีที่แล้ว +9

    On thin material, lay down a series of "C"'s - build your bead out of dozens of tiny C welds - it's much the same as laying one spot onto the last spot, except you're laying down C shaped spots - each capital C lays down onto the last - your heat is mostly going into the last C & not the base metal, so you won't blow holes, but it gives a silly strong weld on even the thinnest metal. Plus it looks like you ran a continuous bead where nobody could possibly run a continuous bead because the base metal was so thin. :-)

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว +1

      Hey thanks for the comment and the view and your input

    • @jamesward5721
      @jamesward5721 ปีที่แล้ว +1

      @@26feironworks79 Subbed because "Sensible" :-)

    • @technicalitems731
      @technicalitems731 8 หลายเดือนก่อน

      So...what about the flux on the C you are connecting to?? I'm new to the flux core so...idk what I'm taking about but...thanks for any advice

  • @mikemilton9841
    @mikemilton9841 ปีที่แล้ว +2

    If you have an extra welding lens put it in front of the camera lens so we can actually see the welding process and how the bead is flowing would be a big help.....Just a thought

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว +1

      Hey thanks for that I appreciate That is something I have been meaning to do but I just haven't had the time to get around to it to do it the way I would like to do it kind of an OCD thing thanks again

  • @samdang5246
    @samdang5246 หลายเดือนก่อน

    Great lesson! Thanks

    • @26feironworks79
      @26feironworks79  หลายเดือนก่อน

      You're very welcome glad it helped

  • @1924ab
    @1924ab 9 หลายเดือนก่อน

    Great video but wish you had a filter, what size wire did you use?

    • @26feironworks79
      @26feironworks79  9 หลายเดือนก่อน

      Hey, thanks. much appreciated. I was using 030 Wire from Home Depot. It's the Lincoln NR211

  • @stevencbradley
    @stevencbradley 2 ปีที่แล้ว +2

    It's apparent you get good penetration on your welds. I have watched a number of MIG welding videos that give me the opposite opinion (I know you are using flux core); it seems that some of those welds are mostly surface welds. I haven't asked the weldors, but I'm curious. Have you seen that happen, & which process does it the most? How prevent it?

  • @yogoombah2356
    @yogoombah2356 ปีที่แล้ว

    Great info!
    I appreciate your teachings, I'll practice all three methods... PEACE OUT!

  • @BertitoPerez1
    @BertitoPerez1 ปีที่แล้ว

    Great video for people like me who are starting to weld very helpful thanks Godbless brother

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Hey thanks for the compliment much appreciated I hope you're able to build some really cool stuff is There any other content you would like to see?

  • @osbornebay944
    @osbornebay944 ปีที่แล้ว

    I am learning flux weld with my $69 Powerfist 140 Mig. , reversed ground to +, your video is a gem, Sir!

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Hey thanks for the feedback and the view much appreciated I hope you're able to build some awesome stuff With some great looking welds thanks again

    • @elipsonj
      @elipsonj ปีที่แล้ว

      Hi! Where did you get that welder for $69 ? What brand is it? thank you

  • @bloop6812
    @bloop6812 ปีที่แล้ว +1

    Hey brother Repetition is the Mother of Skill

  • @guillermoarreola9919
    @guillermoarreola9919 ปีที่แล้ว

    Great video man, just picked up a titanium myself. Can’t wait to play with it and see what it can do

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      That's awesome I'm glad to hear it I think it will work out really well for you I hope you're able to build some great projects thanks again Also on a side note go to home depot and get the Lincoln NR211 wire 030 works the best for me

  • @shavitzsrios
    @shavitzsrios ปีที่แล้ว

    Thanks for your help great job ...buen trabajo amigo

  • @dkdogs
    @dkdogs 9 หลายเดือนก่อน

    Some people say that you need to reverse the polarization on these welders. Did you do that? What are your thoughts on that?

    • @26feironworks79
      @26feironworks79  9 หลายเดือนก่อน +1

      That is a great question so far. I've been very happy with the performance of the machine the Way it came from the factoryI think the biggest problem is the quality of wire For me I really like the performance of the lincoln Wire from home depot, it's the NR211 or the KT industry's wire from Ace. Hardware seem to work very well for me. Thanks again.

  • @omahaL98
    @omahaL98 8 หลายเดือนก่อน

    Good teaching method thanks.

  • @j.rothchild173
    @j.rothchild173 ปีที่แล้ว

    U the best of the Wild West ! Tks!

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Hey thanks for the compliment much appreciated it I hope the video was able to help you perfect your welds so you can build some really cool stuff with great looking welds. Thanks again

  • @thisismypickle5164
    @thisismypickle5164 ปีที่แล้ว

    Worked for several companies here in Phoenix, Echols is where almost everyone goes for blades. Those less inclined to persevere would get theirs at harbor freight.

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      That's awesome to hear, you just made my day. Thanks for the comment and the view.

  • @billarroo1
    @billarroo1 2 ปีที่แล้ว +1

    Your 3/8" plate 1-G test was really
    Cool, it's hard to believe that a 120vac FLUXCORE. welder could do a plate bend test and PASS !!
    ESPECIALLY with
    030. E71t-GS wire, which is light gauge single pass Only wire.
    Great Video. Thanks
    Now I might try 3-G, virticle up, beveled 1/4" or so plate test with the Titanium 125 amp I just bought !! 😂THANKS

  • @Anth4044
    @Anth4044 ปีที่แล้ว

    This was very helpful 👍👍👍💯 Thank you so much 👍

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว +1

      Hey thanks a lot for the compliment much appreciated

  • @hectorr814
    @hectorr814 10 หลายเดือนก่อน

    EXCELENTE VIDEO¡¡... Y MUY FACIL DE ENTENDER¡¡...SALUDOS DESDE MEXICO¡¡

  • @jertres2887
    @jertres2887 6 หลายเดือนก่อน

    Can you film thru a self darkening welding helmet lens? So that we can see what YOU see as you do it. Thanks

    • @26feironworks79
      @26feironworks79  6 หลายเดือนก่อน +1

      I'll try. I don't know if I can promise anything. I've been busy and I haven't been able to make as much content as I'd like to but I will definitely keep it in the back of my mind. Thanks again.

  • @dericksamuel6088
    @dericksamuel6088 2 ปีที่แล้ว

    This was very helpful i just bought that welding machine thank you

    • @26feironworks79
      @26feironworks79  2 ปีที่แล้ว

      Hey thanks for the compliment much appreciated glad I could help

  • @chrishonerkamp5979
    @chrishonerkamp5979 2 ปีที่แล้ว

    I remember back in the late 90's when I was just starting out we had a guy that did something really similar and I began practicing to be able to have the same look. I got it down really good then when I got into oil and gas companies they came unglued because they were afraid I was going to do it on something that had to be 100% exray - bend. I wasn't allowed to do that anymore. I don't think I ever did anything like that on a test either. That being said it was fun!

    • @26feironworks79
      @26feironworks79  2 ปีที่แล้ว

      I definitely feel you on that one thanks for the comment it was spot on

  • @davecunningham3371
    @davecunningham3371 ปีที่แล้ว

    On the third method "stacking dimes". Do you just hold steady, or do you make any circular motion as the welds forming before you release and move on? Thank you. Great Chanel !

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว +2

      I just hold steady till I get the desired size and lift up and start the next one hope this helps Great question thanks for the view.

  • @BobWolford-q2b
    @BobWolford-q2b ปีที่แล้ว

    I have this welder- great little machine. I prefer the drag a line, then circle, drag a line, then circle, etc. that way, you're getting good root penetration AND adjacent penetration when you make that circle, assuming you do it slow enough. The other method (modified stitch, I guess), is just stacking a weld on top of the joint. Looks great, but penetration is suspect.

  • @dougeing6521
    @dougeing6521 ปีที่แล้ว

    Excellent tutorial!

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Hey thanks for that much appreciated Thanks For the Comment and the view

  • @dalehess6265
    @dalehess6265 ปีที่แล้ว

    Thank you. I'll try them tomorrow.

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Awesome, that sounds great. I hope it works very well for you and you're able to build some great stuff Thanks for the comment and the view.

  • @opa_plays_mw5318
    @opa_plays_mw5318 7 หลายเดือนก่อน

    need a higher filter on the camera so we can see the puddle. What happened to "if it leaves slag you drag"? you are going back into slag?

    • @26feironworks79
      @26feironworks79  7 หลายเดือนก่อน +1

      Hey, thanks for the comment and the view in most cases when I use this.
      Technique for welding. I use it in low to medium pressure applications and a lot of times I wind up grinding it off.
      And I haven't seen any slag inclusions yet. If I'm really sloppy and in a hurry. Yes, I will definitely have slag. Include conclusions and problems, but so far I've had. Decent luck for lack of a better word. Thanks again.

  • @thomaszavacki5647
    @thomaszavacki5647 7 หลายเดือนก่อน

    what brand wire do you use for the welding you did in this video????????????

    • @26feironworks79
      @26feironworks79  7 หลายเดือนก่อน

      Lincoln. 030 NR211 From Home Depot

    • @thomaszavacki5647
      @thomaszavacki5647 7 หลายเดือนก่อน

      @@26feironworks79 thank you

  • @WiSeNhEiMeR-1369
    @WiSeNhEiMeR-1369 ปีที่แล้ว

    THANKS
    COOP
    ...

  • @igotJesus88
    @igotJesus88 ปีที่แล้ว

    Can I build a smoker with this welder? Should be 1/4 inch.

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      I think you should be totally fine. I don't know if there is an Ace Hardware by you. But they carry a product from KT industries. It is point 030 wire. I have had very good luck with it. I have not had a chance to do a review with it yet.

  • @randomschittz9461
    @randomschittz9461 2 ปีที่แล้ว

    Looks good brother, keep em coming.

  • @Jeffrose_
    @Jeffrose_ ปีที่แล้ว

    Super helpful. Thank you

  • @kundrew1990
    @kundrew1990 8 หลายเดือนก่อน

    very nice thanks

  • @Dailyfiver
    @Dailyfiver 2 ปีที่แล้ว

    Thanks for the tips!

    • @26feironworks79
      @26feironworks79  2 ปีที่แล้ว +1

      Hey thanks happy to do so I hope they work for you thanks again

  • @paulomarcandali5674
    @paulomarcandali5674 ปีที่แล้ว

    great job🗜️⚡ thanks💯🛠️

  • @brandonleon795
    @brandonleon795 ปีที่แล้ว

    Do you think this machine would be good for welding sheet metal body panels?

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Hey to be brutally honest with you I'm not sure I think my personal preference would be to go with a solid core wire of point 024 I have not had a chance to mess around with either the Vulcan or the titanium machines at I would recommend trying either the Vulcan or the titanium smaller mig welders Thanks for the comment and the view

    • @markreinders2261
      @markreinders2261 ปีที่แล้ว +1

      As someone who does it almost everyday at work and has used the 125 to do it yes you can. Did it take 2-3 hours of messing around one day to find the right settings? Yes it did. If your going good clean metal to good clean metal it's not a big issue once u find settings that work. If your going good clean metal to something that's a little less then ideal youll still have some issues but tbh you'd have those issues with a mig set up too, been there done that. Would u be better off with a welder that gives you more control over your power settings then the 125 has? Yes you would be. I was looking at the 125 and after a former coworker got one and I had a chance to use it for a couple months I realized I wanted more control and more options like the option to use gas if I wanted. Got a hynade 175sg gave me more control over power settings and the option to use gas as well as do stick/tig and use a spool gun. The base welder comes with the mig/flux torch and the stick torch and is $70 more then the 125 is. Add a gas regulator and tig torch and its $140 more then the 125 is and well worth it imo. All that said your still better off using mig for body/patch panels. Personally after buying a tank and gas so I could do aluminum I'm just to cheap to buy a second tank and gas to run mig when using flux core has been working just fine for me.

  • @ryanhensley146
    @ryanhensley146 ปีที่แล้ว

    hello how far was your stick out?

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      My stickout was right around 3/8 of an inch. Thanks for the comment and the view.

  • @reygenabraham7564
    @reygenabraham7564 ปีที่แล้ว

    Can i plug this 125amp direct into my garage outlet without any change in my breaker

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Hey great question if you know where Your service panel is and you could find the circuit breaker for your? Garage. See what size it is and if you can maybe upgrade it to one. That's just a little bit bigger. I would go ahead and try it on the lowest setting possible and slowly work your way up thanks again.

  • @michaellinner7772
    @michaellinner7772 ปีที่แล้ว

    There appears to be a beast lurking just outside your door. Either you are in trouble or you'll be happy to see it. Only you and time will tell. 😉

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว +1

      Thanks for that comment it means a lot to me I'm gonna give it my best and I have a lot more awesome innovative things to come thank you again have a very merry Christmas

    • @michaellinner7772
      @michaellinner7772 ปีที่แล้ว

      @@26feironworks79 Thanks for the instruction. Even though I'm an old fart I am absolutely green to the whole welding world and I just purchased this exact welder and can use all the help I can get.
      My motto is "The day I stop learning is the day I start dying".

  • @steelcityperformancesaws
    @steelcityperformancesaws 2 ปีที่แล้ว

    i like your work shirts what make are they?

  • @raysalinas155
    @raysalinas155 ปีที่แล้ว

    Good info.

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Hey thanks i'm really glad it helped you out thanks for the comment and the view

  • @ironhead320
    @ironhead320 ปีที่แล้ว

    I watched a few times going to try the first two that you did.I got this new IGBT welder and this thing is a pain to get set up

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Sounds great if it continues to be difficult I would go ahead and take it back and go a different way away just keep your material clean go clean check your settings and watch your stick out on your wire probably probably 3 eights of an inch to half an inch Max

    • @ironhead320
      @ironhead320 ปีที่แล้ว

      @@26feironworks79 looking around for some 1/4 I have it dialed for 1/8 but on low it still will blow through sometimes.I might even go back to a transformer style welder.

  • @felipesantamaria6501
    @felipesantamaria6501 ปีที่แล้ว

    Great thanks

  • @Teamogkstar
    @Teamogkstar ปีที่แล้ว

    What wire are you using

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Great question. I'm using. LincolnNR211.030

  • @Micscience
    @Micscience 2 ปีที่แล้ว +2

    Nothing against what you are doing. It's always good to share knowledge but I think fluxcore looks better with straight beads, or continuous loops. I don't think the stacked dimes look with fluxcore looks better. Stacked dimes needs to be shiny or have a consistent color to look nice imo. Plus those aren't dimes anymore they are stacked nickels or quarters. Anyway thanks for sharing I'm sure some people want to do this take care.

    • @26feironworks79
      @26feironworks79  2 ปีที่แล้ว +1

      Thanks for your opinion and the view

  • @joem2745
    @joem2745 2 ปีที่แล้ว

    👏

  • @AC-bm3dx
    @AC-bm3dx ปีที่แล้ว

    What wire size was that?

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Lincoln NR211.030

    • @AC-bm3dx
      @AC-bm3dx ปีที่แล้ว +1

      @@26feironworks79 thank you, loved the video!!

  • @ericcapucci9869
    @ericcapucci9869 ปีที่แล้ว

    the second method is way better than the first you still need to let the toes wet in more the other two will trap slag and therefore weakin the weld cut and etch your stuff to see the real results not just the surface.

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Hey thanks for input I realized that none of these Wells would. These are typically for low pressure situations

  • @bobd.fletcherjr4912
    @bobd.fletcherjr4912 ปีที่แล้ว

    👍👍👍👍👍👍👍👍👍👍👍

  • @a1930ford
    @a1930ford ปีที่แล้ว

    Isn't that first method called weaving?

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      I never Really thought of it in that aspect but I guess you could classify it in that way if you wanted to thanks for your input

  • @alexc.8424
    @alexc.8424 2 ปีที่แล้ว +1

    9:57 the geese are laughing at ya

  • @SLO-Ride
    @SLO-Ride 2 ปีที่แล้ว

    I would think, the "spot weld" method would not get the metal hot enough for good penetration.

    • @26feironworks79
      @26feironworks79  2 ปีที่แล้ว +1

      I'd have to agree with you on that that's why I only use it in very low pressure applications

  • @Leo-bu3kj
    @Leo-bu3kj ปีที่แล้ว

    You need to just run a stringer or use a weaving pattering. Holding at one spot to build the pool up then moving drastically it just going to cause cold lapping.

  • @hinds90
    @hinds90 ปีที่แล้ว

    Nice video! I can pass xray all day but can't stack dimes for shit. Stick or mig

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      I totally get it just mess around with watching the outside edges of your puddle and the back edge of your puddle and don't be afraid to mess with your heat settings thanks again for the feedback and the view

  • @maxSchlein
    @maxSchlein ปีที่แล้ว

    Oh, "Like That", hahahahha

  • @bobd.fletcherjr4912
    @bobd.fletcherjr4912 ปีที่แล้ว

    👍👍👍👍👍👍👍👍👍👍👍👍🙋‍♂️🙋‍♂️🙋‍♂️

  • @snoops606
    @snoops606 ปีที่แล้ว

    Just bought one ...

  • @mattfogarty8144
    @mattfogarty8144 2 ปีที่แล้ว +9

    Bro all you need to do is drag it... trust me itll look the best when you just drag it

    • @justinoff1
      @justinoff1 ปีที่แล้ว

      Why do you hate penetration?

  • @KINGSTONSPRIDE
    @KINGSTONSPRIDE ปีที่แล้ว

    3:15

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Are you making reference to my lovely camera work lol

    • @KINGSTONSPRIDE
      @KINGSTONSPRIDE ปีที่แล้ว

      For those of us who just want to get down to business. Thanks for the tips these techniques work great. Used it to do my thumb for my mini excavator.

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      @@KINGSTONSPRIDE Hey thanks for the feedback much appreciated I'll try to get more stuff out as soon as possible thank you again

  • @bobd.fletcherjr4912
    @bobd.fletcherjr4912 ปีที่แล้ว

    You need better lighting to show us what you're welding

  • @SPS-MOTOP
    @SPS-MOTOP ปีที่แล้ว

    You have to watch the filmed video yourself, so as not to embarrass yourself, you draw with a felt-tip pen behind the scenes, you can’t see ything, you can’t see movements when welding either 👎😖

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Thanks for the feedback I'll try to be more aware of that next time

  • @WHEREVER-I-ROAM
    @WHEREVER-I-ROAM ปีที่แล้ว

    STACK THOSE DIME'S 👌

  • @WHEREVER-I-ROAM
    @WHEREVER-I-ROAM ปีที่แล้ว

    THIRD METHOD IS GREAT FOR *((THIN))* METAL LIKE EXHAUST PIPES,and TUBING

    • @26feironworks79
      @26feironworks79  ปีที่แล้ว

      Couldn't agree with you, more, brother. Thanks for the comment much appreciated.