If I aint mistaken our old 1970's flexo that I load will do 18,000/hr but thats on a smaller coffee box and theres 62,000 of them mofo's in one damn order ! Makes the night go by fast tho.
My old Langston Saturn II 37x82 2Color FFG can run 200bpm on a horrible warp. Damn corrugator sending us badly warped sheets every single time. What the guy's feeding in the video is cakewalk.
The Emba that I work on has a vacuum system that runs the entire length of the machine. It'll run warped board like a beast, provided you can get it to go into the feed section straight.
“My Boss arrived at work in a brand new Ferrari. I told him: “Wow that’s a nice car”. He replied: “If you work hard, put all your hours in, and strive for ''Excellence'', I'll get another one next year”.”
Hello to all, could you tell me please how can I run cardboard sheets made from virgin fibers? This kind of issue don´t let me process them because they slip. Thank you
Possibly tighten feed rolls. Maybe new feed belts or wheels. We ran a lot of kemi and eventually that would build up on our belts and we qiuld have to wipe them down with alcohol or toluene. only works for so long.
Ours doesnt even look that good... Im a feeder on a Lattitude not sure of the model but the fastest ive run is 305 also had to cut/take out my own strap and wrap...
Somebody get this man a pre-feeder
Underrated comment
I use the same machine but red and I keep telling them the pre feeder will pay itself off but owell
Couldn’t imagine not having a prefeeder especially on something that goes over 150 per min
🤣🤣🤣🤣 so true
Ótima máquina trabalhei por 10 anos em uma ward
Damn this reminds me of the first crappy as company I was in with hand feeding. Thank god for prefeeders!!
My Ward is from 1978 and has a prefeeder. These people trippin!!
Guy needs a pedal operated lift table and a good Dayton high powered fan and he's set at the feed position
S&S ZLM. Still a beast after 48 years of service.
Nick Gelis 50' ZLR 3 color with die cut right here
If I aint mistaken our old 1970's flexo that I load will do 18,000/hr but thats on a smaller coffee box and theres 62,000 of them mofo's in one damn order ! Makes the night go by fast tho.
This company has an updated bundle strapping system but can't put in a pre-feeder? I can't imagine that job not having a high turnover rate.
Lol no pre-feeder plus incentive on a machine that runs fast. Guarantee it's got a high turnover rate lmai
My old Langston Saturn II 37x82 2Color FFG can run 200bpm on a horrible warp. Damn corrugator sending us badly warped sheets every single time. What the guy's feeding in the video is cakewalk.
The Emba that I work on has a vacuum system that runs the entire length of the machine. It'll run warped board like a beast, provided you can get it to go into the feed section straight.
canopus yeah the guy in the video act like hes working hard man by the time i would reach for some stock shit would almost be gone!!
@@MiClLC Them EMBA'S kick ass , I ran a 240 and a 160
He will only be able to feed that much at a time for so many years, then health issues will inevitably start to occur.
I am from nepal This work i am 5 year experience i like This work
ran the same machine wide open day in and day out loved it but can't handle a evol
😍 belleza de máquina esa ward
“My Boss arrived at work in a brand new Ferrari.
I told him: “Wow that’s a nice car”.
He replied:
“If you work hard, put all your hours in, and strive for ''Excellence'', I'll get another one next year”.”
that look like the same machine i use to run at gnc
I am from brasil klabin jundiai 👍👏🇧🇷
Ja fui da Orsa e international paper...e vi que o sofrimento é mundial nessas máquinas
Poor kid on the front of this machine. Blair Witch videography...
One man a pre feeder
That’s a daily for me too
turn it up
right that is slow af
I can’t believe how easy I have it at work, I run a evol 115 top speed 300bpm
Yeah I wish we had an Evol at our facility ar a Falcon. Those are the best.
Hi there .!
How much is the cost for one of this machine ???
About 3-5 million depending on who makes it.
The feederman is earning his pay.
900,000 sqft ran through my Langston 50 inch in 8 hours , it's inverted fold so hand fed while flipping paper
976,000 square feet 76,000 boxes in 8 hours but we don't handheld anymore and it's not a top printer so I give you props
you flip that paper yourself?
@@Petersjackson450 yes I did , my handfulls were and are 150 -200 sheets a pull , on 25 sqft sheets its 35-50 sheets a pull
I run millions. Ran 4 one million days in the last 2 weeks.
Hello to all, could you tell me please how can I run cardboard sheets made from virgin fibers? This kind of issue don´t let me process them because they slip. Thank you
Possibly tighten feed rolls. Maybe new feed belts or wheels. We ran a lot of kemi and eventually that would build up on our belts and we qiuld have to wipe them down with alcohol or toluene. only works for so long.
Let my people go
Ok!
high speed FFG,how about bundling machine?
CAN ANYBODY SAY THE PRICE OF THE MACHINE ???? PLZ GUYS
I think around 3 mil
my guys would be running 15-18k per hour slowpoke
Relyt Rekab how much for one of this machine used .?
En la ward donde trabajo se saca solo 12,000 cajas por hora
B flute, c flute, double wall?
Hello, general corrugated cardboard is divided into A, C, B, E flute and A is the largest I mean A is the highest corrugated ， E is the smallest
C flute, probably.
My S&S ZLR puts that to shame
A este hombre en dos años no le servirá la columna
How much your bpm in one job
run a 2 color McKinley 38 14000 a hr
ha i run a 38 flexo full blast 13000 a hr
Lmao I run an 113" at 21,000.. So fast you cant even see the boxes
Are you the one stacking or hand feeding
Computers give way too many problems. Something's always fucking up. Other than that there great and fast.i still stick to s&s's tho
lol. you aint kiddin. i work on a 50 year old 37 langston. she is a bitch sometimes. but will still run like a beast.
+Tyler Baker langston ??
SCC ?
Problem with S&S is single slotting shaft, Langston had dual slotting shafts in the 70's
I'm on a Mitsubishi evol now. Love this beast
This one has 3 slotter shafts.
Ran a EMBA 240 faster than that all day everyday
Ours doesnt even look that good... Im a feeder on a Lattitude not sure of the model but the fastest ive run is 305 also had to cut/take out my own strap and wrap...
This video was literally shot using a potato
Thats slow we run 27 lmc latidude 400 bpm imagine the stacking
You guys saying that's slow but that's max bro 15000. 250 bph
37 ward I run goes 18k a hour 300 a min
Carlito Cunningham I run a s&s 300 . with a 350 bph
Wards are junk. My work has 2 of them and they are not that old and are always breaking down