This is my first video of yours. I have to say, I've looked through several channels for stone carving, and you're the first one who really seems to know what he's doing in the tutorial. New sub.
I cannot thank you enough for starting a series like this! I have been struggling to figure out what all the different burrs are the most useful for and HOW to use them. You explain what you are doing and why you are using specific burrs so well. Am really looking forward to this series. Thank you, thank you!
I'm very glad that the information was helpful for you! 😊 it can take a lot of trial and error to figure out how to efficiently use each burr, so I will be detailing the uses of burrs in an upcoming video! 😊
Just came across your video!. I'm wanting to start stone carving when I know what tools are needed the most. I notice that you don't use water. I thought that was too hard on the bits. Thanks, and yes I subscribed right away!
This is sooo awesome! I did want to learn to carve rocks. I do have some cobble stones I picked up from river. Some are naturally polishd smooth. Some are more grainear. Now I know what to do with my dremel and those rocks !! Thanks so much for showing us this !
This video is fantastic. Thank you so much for taking the time to create this to help others (newbs like me). :) Your videos are way more helpful than others I've seen because you show the burrs and talk about why you are using them and to what effect. Thank you so much! I hope you are continuing this series.
Thank you for all you are doing to save us newbie carvers time and money. I just got my new Dremel and I'm so excited to start using it. Your contributions help ease the uncertainty in getting started.
Thank you. You explained brilliantly and showed which burs etc to use without going overboard on explanation. Feel confident now. I make Sterling Silver jewellery but loving the concept of carving gemstones. From Brisbane Aussie
Hi im a newbi..and have really enjoyed watching n listening to your video..thankyou for all the info etc on burrs etc..i. understanding things a little better now...can you tell me which dremmel drill is the best to use..i already hsve a cheap small one which really is a bit rubbish id like to get a good finish to my projects..Thankyou in anticipation..Christine
I’m engraving marble for the first time and this video helps a lot to know which tools to use. Do you know where I can find drums that will fit a 2.3mm engraving pen? Thank you!
This is perfect for a beginner wanna be stone carver! I love the specifics and step by step instructions. Would it be possible for you to provide links to the burrs you use in this video. Specifically the 80 grit ones . I’ve looked online and haven’t found anything similar to the ball, cylinder, or your “ most used” one. Those I have found aren’t aggressive or large enough to get the results you show. Thanks! Looking forward to your next video installment!
I just love watching you work on anything you do. It's very relaxing to me. And that's just what I need right now. I am working my way through all your videos from the beginning to current.
@@TheoKellison you are very welcome. You had a soothing voice when you are doing.your tutorials. All I have that I can do right now is sit and watch TV, movies and TH-cam. I am awaiting surgery to fix my heart. Not allowed to do anything that raises my heart rate. So when it does start to go up I watch your videos and it helps. Well yours and a few others, like Katydid. I truly love all of your videos. Thank you for being so awesome. Can't wait to get my orders from your etsy store too. Super excited to see what I got.
This is very interesting watching and learning. Can I ask why you aren't using water when you carve? I see so many other folks using water when they are carving. Love your carving and the info you share thank you so much for this video
It's fun to find another carver named Theo! The best way I know to control dust is to carve under a water drip, or routinely dip the carving into a container of water as you carve. Your diamond bits will last much longer too! This is the technique Chinese jade carvers have used for millennia.
i dont like give you a dislike, just a good advice. you find riverstones with asemen natural carving, in every one stone is life and we are not the creator !
Excellent, looking forward to the rest of the series ;) I have worked with inlaying things like a seahorse I cut out of Aluminium into different coloured slate (Green, Purple) and use the vacuum technique for that, otherwise my living room and everything in it, TV etc get coated or clogged with the dust lol.
Very well put together video. What kind of dremel are you using? I am trying to find the best small dremel for carving because I am prone to tendonitis due to the vibration. I need one that is dependable, light and comfortable in my hand. Any information yo can give me would be appreciated. Thank you.
What i miss is some info about the rotation speed when carvind stones, and why dont you water cool them to make sure those diamonds hold longer (or am i wrong and it makes no difference ?)
I usually only worry about water with harder stones, these rocks are just porphyry so they are extremely soft. Plus their dark color makes my drawn on lines really hard to see when wet so i usually don't worry about water with these, but any other stone i will absolutely use water! As for rpms i use a foot peddle on my flex shaft, and it is always maxed (60,000 rpms i believe this model is). I'll switch to lower rpms when polishing but i have never noticed too much of a difference when shaping. Hope that answers your questions!😊
@@TheoKellison Hi Theo, thanks a lot for answering my question, i just ask beause i would love to try a bit of stone carving and my rotary tool has a max speed of 30k rpm. i still have to learn a lot before i can start !
@@c.h.670 I believe my Chicago electic flex shaft has 30k rpm and I can carve fairly decent with it and noticed that sometimes just a good bit is more valuable than the brand of rotary tool you use. Hope these little tips can get you carving in the right direction 😆🙃😉
I’m looking for a pen style drill to make designs in stones as well as do nails 💅. What made you choose this drill? I was looking and 1 asks to choose a 110 or 220. How do you know which? Thank you 😊
This and our other videos are great, thank you for doing them. Do you apply a lot of pressure when carving or do you keep the pressure pretty light and grind away at the stone slowly? New to this and trying to figure out how to get smoother "cuts" and control the tool. It jumps around a lot sometimes, even going out of the groove that's already been cut. Oh and what do you seal with? Some kind of oil or wax?
Damn, I was hoping I didn't need a wet tile saw to make a stone flower like that or similar things. That thing is awesome. I wonder how many bits it would take to grind that down without one. Do you have any advice on drilling holes in a stone like that using a dremel tool?
You absolutely can do all of the shaping with diamond burrs, i just trimmed it to save myself a little time!👍 as for drilling, make sure you have constant water on the stone you are drilling and put on a thin and evenly tapered burr. The only thing to note is go VERY slow; a little cut in, rewet, a little cut further, rewet. Otherwise your burr will burn out and lose its grit, or much worse, the burr can break off inside the hole ( which is a nightmare to get out) i hope that answers your question!😊
I have a thousand questions about your bits and the rotor tool itself. First What is a good entry level rotor tool and bits ? I leave it at one question today lol. Your background music reminds me of the song "Gypsy Queen " by Chris Norman (former lead singer of British rock/pop group Smokie) Thanks for this video I will keep an eye out for more :)
Please tell me what is the hardness of these rocks? 5, 6, 7?I am struggling with my rock carving but soooo want to carve my beach rocks. Living on Vancouver Island, BC Canada, so beach rocks are stunning.
I'm extremely new to dremal rocks an carving lol I have a diamond bit kit my question is r all diamond bits the same grit an if u could recommend a website o can order bits I live in Canada an I was lucky enough to find a dremal 3000 hope it's a good one lol
Screw your ads TH-cam. You had over 30 minutes of commercials you tried to put me through for this clip. TH-cam sucks🍒. Stop exaggerating your poor quality.
This is my first video of yours. I have to say, I've looked through several channels for stone carving, and you're the first one who really seems to know what he's doing in the tutorial. New sub.
Really enjoyed your video.
I'm going to begin carving my first rock tomorrow.
Thank you so much for the tutorial.
Ok this is prolly the best explanation for different bits I’ve seen. I’m new to this n it was a great help. Thank You
I cannot thank you enough for starting a series like this! I have been struggling to figure out what all the different burrs are the most useful for and HOW to use them. You explain what you are doing and why you are using specific burrs so well. Am really looking forward to this series. Thank you, thank you!
I'm very glad that the information was helpful for you! 😊 it can take a lot of trial and error to figure out how to efficiently use each burr, so I will be detailing the uses of burrs in an upcoming video! 😊
Thank you for taking the time. Greetings from Barcelona, Spain ;-)
stumbled over the vid and i love it. Thanks for teaching, from germany
Thanks for the info I see you have had these out for awhile just started cutting so I will watching when ever I get the time Thanks again.
That flower is gorgeous!
Thank you for taking the time, The product is fantastic.
Just came across your video!. I'm wanting to start stone carving when I know what tools are needed the most. I notice that you don't use water. I thought that was too hard on the bits. Thanks, and yes I subscribed right away!
This is sooo awesome! I did want to learn to carve rocks. I do have some cobble stones I picked up from river. Some are naturally polishd smooth. Some are more grainear. Now I know what to do with my dremel and those rocks !! Thanks so much for showing us this !
This video is fantastic. Thank you so much for taking the time to create this to help others (newbs like me). :) Your videos are way more helpful than others I've seen because you show the burrs and talk about why you are using them and to what effect. Thank you so much! I hope you are continuing this series.
Very helpful! I have burrs arriving in 2 days!
Wow Thank you. This is just what I was looking for. Your amazing
Thank you for all you are doing to save us newbie carvers time and money. I just got my new Dremel and I'm so excited to start using it. Your contributions help ease the uncertainty in getting started.
Hi another new carver here! I hope you have fun my dude!
Hey what type of Dremel..the choice out there overwhelmes 🤪?
@@hoohargh9945 I will also would like to know witch one. i do not know what to buy.
@@aliciagarnica9169 am still none the wiser 😄
@@hoohargh9945 😂
Thank you. You explained brilliantly and showed which burs etc to use without going overboard on explanation. Feel confident now. I make Sterling Silver jewellery but loving the concept of carving gemstones.
From Brisbane Aussie
Hi im a newbi..and have really enjoyed watching n listening to your video..thankyou for all the info etc on burrs etc..i. understanding things a little better now...can you tell me which dremmel drill is the best to use..i already hsve a cheap small one which really is a bit rubbish id like to get a good finish to my projects..Thankyou in anticipation..Christine
I will have to hunt for the second session. Very good vid Theo. Havagudun .
Muy buen vídeo, tu explicas muy bien cada detalle y me parece re buena idea el aspirador!
Gracias!
This is exactly what I was struggling with so thank you! I'm looking forward to your videos 😁😁😁
I'm glad the information was useful to you! 😊 I'll have the next one out soon!
Very informative! Exactly what I needed! Thanks!
I’m engraving marble for the first time and this video helps a lot to know which tools to use. Do you know where I can find drums that will fit a 2.3mm engraving pen? Thank you!
Can you explain the difference between dry and wet carving?
So cool. You’re a great teacher thanks!
I needed this! Thank you!!!
So the technique you showed would be really good for Celtic knots.
That's my next project. Thanks for the tips this will help 👍😊
This is perfect for a beginner wanna be stone carver! I love the specifics and step by step instructions. Would it be possible for you to provide links to the burrs you use in this video. Specifically the 80 grit ones . I’ve looked online and haven’t found anything similar to the ball, cylinder, or your “ most used” one. Those I have found aren’t aggressive or large enough to get the results you show. Thanks! Looking forward to your next video installment!
I just love watching you work on anything you do. It's very relaxing to me. And that's just what I need right now. I am working my way through all your videos from the beginning to current.
Well thank you so much!😄that truly means a lot!😄
@@TheoKellison you are very welcome. You had a soothing voice when you are doing.your tutorials. All I have that I can do right now is sit and watch TV, movies and TH-cam. I am awaiting surgery to fix my heart. Not allowed to do anything that raises my heart rate. So when it does start to go up I watch your videos and it helps. Well yours and a few others, like Katydid. I truly love all of your videos. Thank you for being so awesome. Can't wait to get my orders from your etsy store too. Super excited to see what I got.
Very nice, thank you for sharing, 😊
i love watching you caring videos i do carving rocks some times i have
Dremel tool and a mini grinder or mini polishing tool great videos thank you
Subbed. You're a natural for teaching 😊
This is very interesting watching and learning. Can I ask why you aren't using water when you carve? I see so many other folks using water when they are carving. Love your carving and the info you share thank you so much for this video
Very informative video. You explained where I knew what you wanted to do. Then you showed how it is done. Love it mucho gusto.
Great tips , I’ve never done stone carving but have always wanted to try it . I have a small collection of rocks I have picked up on my travels.
Love love love your work❣️❣️❣️Thank you for the tutorials 🙏
It's fun to find another carver named Theo!
The best way I know to control dust is to carve under a water drip, or routinely dip the carving into a container of water as you carve. Your diamond bits will last much longer too! This is the technique Chinese jade carvers have used for millennia.
Thanks for that. Great job and very informative
Are you using a Diamond Sintered Bur or? Noticed you're not using water while Carving, is it due to the type of material you're carving?
Great job. Way cool. I love it
thank you for that video and your explanations. Now I'm gonna try it out
Love your design
i dont like give you a dislike, just a good advice. you find riverstones with asemen natural carving, in every one stone is life and we are not the creator !
Excellent, looking forward to the rest of the series ;)
I have worked with inlaying things like a seahorse I cut out of Aluminium into different coloured slate (Green, Purple) and use the vacuum technique for that, otherwise my living room and everything in it, TV etc get coated or clogged with the dust lol.
I learn a lot from your videos. Do you where a mask while carving? Thanks!
Felisitaciones hermoso Arte👍
Much appreciated dear friend
Thank you! Very informative! I plan to try this.❤
Thanks dude. That's amazing
Very well put together video. What kind of dremel are you using? I am trying to find the best small dremel for carving because I am prone to tendonitis due to the vibration. I need one that is dependable, light and comfortable in my hand. Any information yo can give me would be appreciated. Thank you.
This is some good work..
What i miss is some info about the rotation speed when carvind stones, and why dont you water cool them to make sure those diamonds hold longer (or am i wrong and it makes no difference ?)
I usually only worry about water with harder stones, these rocks are just porphyry so they are extremely soft. Plus their dark color makes my drawn on lines really hard to see when wet so i usually don't worry about water with these, but any other stone i will absolutely use water! As for rpms i use a foot peddle on my flex shaft, and it is always maxed (60,000 rpms i believe this model is). I'll switch to lower rpms when polishing but i have never noticed too much of a difference when shaping. Hope that answers your questions!😊
I am so sorry for not seeing this sooner!😳
@@TheoKellison Hi Theo, thanks a lot for answering my question, i just ask beause i would love to try a bit of stone carving and my rotary tool has a max speed of 30k rpm. i still have to learn a lot before i can start !
@@c.h.670 I believe my Chicago electic flex shaft has 30k rpm and I can carve fairly decent with it and noticed that sometimes just a good bit is more valuable than the brand of rotary tool you use. Hope these little tips can get you carving in the right direction 😆🙃😉
I’m looking for a pen style drill to make designs in stones as well as do nails 💅. What made you choose this drill? I was looking and 1 asks to choose a 110 or 220. How do you know which? Thank you 😊
What are the tools used? Where did you get them? Best source? I have a 35000 RPM Brummel...the bits?
This and our other videos are great, thank you for doing them. Do you apply a lot of pressure when carving or do you keep the pressure pretty light and grind away at the stone slowly? New to this and trying to figure out how to get smoother "cuts" and control the tool. It jumps around a lot sometimes, even going out of the groove that's already been cut. Oh and what do you seal with? Some kind of oil or wax?
Are you using a dremel? If so what version?
Thanks for use full information video
On a larger scale like for a waterfall? Not pool size but maybe table top size, would you use the same things? Or do they make larger scale burs?
Great info!!
Спасибо за видео . Супер ! 👍🙏
Hola gracias por compartir el video.
Podré aprender con un dremel 3000?
Si, yo uso ese
Maybe a video on Polishing varied levels in a 'semi-complicated' carving, leaving the background rough and polishing parts.
Very good
Damn, I was hoping I didn't need a wet tile saw to make a stone flower like that or similar things. That thing is awesome. I wonder how many bits it would take to grind that down without one.
Do you have any advice on drilling holes in a stone like that using a dremel tool?
You absolutely can do all of the shaping with diamond burrs, i just trimmed it to save myself a little time!👍 as for drilling, make sure you have constant water on the stone you are drilling and put on a thin and evenly tapered burr. The only thing to note is go VERY slow; a little cut in, rewet, a little cut further, rewet. Otherwise your burr will burn out and lose its grit, or much worse, the burr can break off inside the hole ( which is a nightmare to get out) i hope that answers your question!😊
@@TheoKellison Thanks a lot man! That definitely answered my question. The going slow part and using water makes a lot of sense.
What kind of tool and burrs are you using? Thanks!
great vid
I have a thousand questions about your bits and the rotor tool itself. First What is a good entry level rotor tool and bits ? I leave it at one question today lol. Your background music reminds me of the song "Gypsy Queen " by Chris Norman (former lead singer of British rock/pop group Smokie) Thanks for this video I will keep an eye out for more :)
Please tell me what is the hardness of these rocks? 5, 6, 7?I am struggling with my rock carving but soooo want to carve my beach rocks. Living on Vancouver Island, BC Canada, so beach rocks are stunning.
where are u buying your diamond bits from??
Do you pick certain stones over others to carve. What hardness do you prefer?
Can you please tell me how to flatten the bottom of a rock to make it stand up right?
I need to buy the bits .. where to buy them ?
how many turns do you use for the diamond pens?
Where do you buy your low grit burrs?
One thing you don't mention is to wear a respirator. Silicosis is no joke.
1:46 “always wear a respirator when carving anything!”
I'm extremely new to dremal rocks an carving lol I have a diamond bit kit my question is r all diamond bits the same grit an if u could recommend a website o can order bits I live in Canada an I was lucky enough to find a dremal 3000 hope it's a good one lol
In alibaba.com can find that bits. Cheers from Mexico!
Great
What’s the mos hardness of those stone?
Great tutorials, thank you
Nice
How much price is this?
Screw your ads TH-cam. You had over 30 minutes of commercials you tried to put me through for this clip. TH-cam sucks🍒. Stop exaggerating your poor quality.
👍👍👍
Surely keeping the stone wet will make ur burrs last longer.???
Tell us what kind of rock you are sculpting.
How about carving a Montana Bear?? or trout? Antlers, you could make great belt buckles from these stones,
👍🏻👍🏻👍🏻👍🏻👍🏻🇬🇧Subbed 🇬🇧
This video is great however, hobbies turn into trying to make $$ the problem is if you can make $5 but you have $100 of time in the project.
And it Takes 8 commercial interruptions. Boo TH-cam boo 🤢.
6 commercials?
No Thanks.....later.
What stone do you use and recommend? I was told sandstone.