Great video. Thank you. Gonna do both of my doors this weekend. Someone punched in both door locks and couldn't get in that way so they just ended up busting my window.
They got into my Tahoe broke the ignition cylinder, I replaced that already just need to do the driver side door and she’s good to go when I get a chance to do that.
Ideally yes but at the time I made this I couldn't find any video or instructions on how to do it. So I had to tear the door apart before I figured out how to do it. I didn't want to film all of the trial and error but once I figured it out then I filmed info to help anyone attempting it from scratch. I could have put it all back together and shown the tear down in the correct sequence but that felt like too much work at the time, sorry.
Hey there. I replaced the driver side handle, and got everything connected. I closed the door to test it before fully connecting the the panel back on. The door didn’t open, so I went in to open from inside and it didn’t open either. Now I’m stuck. Any ideas? Thanks!
We got in from the passengers side and crawled over to the drivers side. With my car I was able to unlock the drivers door and open it. The clicker might work to unlock it too. Once unlocked the door should open with the outside handle.
@@FlyingMonkeyMedia she has a weird model where she has no other key hole to open anything and for some reason her battery decides to die randomly so do you think there’s a way to open it from the outside
@@abrahamalonzo2602I’m wondering the same question but this douchebag decided to quit answering your questions 😂😂😂😂 My Yukon battery died…. I have no key hole since I bought the damn thing…I’ve been needing to get that key hold replace but today, my Yukon battery died so now what?😂😂😂😂😂
Yes my cylinder lock broke, someone also broke into my Tahoe, I had to buy the door plate and the cylinder lock, I just need to take it to a locksmith and get it coded, on my Tahoe the door plate where to cylinder was at was cracked and the cylinder was done… the key won’t even go inside…
Like I said, I couldn't find anything online to tell me how to do it so I had to do some destructive disassembly to figure it out. In retrospect I know how to do it know. Hopefully you can see past my mistakes and do it correctly.
I don't know the exact condition of your door handle. I couldn't get into my Tahoe with the broken handle from the drivers side so I got into it from the passengers side. I could exit the vehicle using the inside drivers side door handle but I couldn't get back in until I fixed it like in the video. It was a huge inconvenience for about 10 days until I figured out what part to order and how to do the repair. When I fixed mine there was no video on TH-cam that I could find to do it so that's why I made and posted the video so others wouldn't have to figure it out from scratch.
Ohhh thank you I appreciate that alot. I only have one keyhole and they did the exact same thing to my door. I've watched a few videos and ima try to wedge it open from the top.
@@jarrodloran1 I guess we have different model. Mine had the clicker to unlock all the doors so I could get in from anywhere. What about the hatch? Mine has a key unlock on the hatch. If yours has the same you could get into the car that way.
Hey there. I replaced the driver side handle, and got everything connected. I closed the door to test it before fully connecting the the panel back on. The door didn’t open, so I went in to open from inside and it didn’t open either. Now I’m stuck. Any ideas? Thanks!
All the door handle does is pull that rod up. I know you can't see much inside the door panel but you'll have to figure out why it isn't pulling the rod up high enough. Maybe your door handle is damaged somehow or maybe the rod is bent. Without being able to see it it is really hard to say what the problem is. Good luck..
That just happened to me last night. They broke the handle as well and was unable to get inside. Thank you for this very helpful video!
Aww man. Fixes my washer and my door. You are the man !!! Thank you!
Great video. Thank you. Gonna do both of my doors this weekend. Someone punched in both door locks and couldn't get in that way so they just ended up busting my window.
Thanks Jeff. I'm going to be trying this repair on my 2004 Chevy Tahoe.
Me too !
Very Helpful video! My next project needed a few tips thanks a lot brother
Great video… very explanatory and great articulation.
I recommend taking off rail connected to key cylinder. Only way to unlock is with key fob
Smart
They got into my Tahoe broke the ignition cylinder, I replaced that already just need to do the driver side door and she’s good to go when I get a chance to do that.
Hey brother really appreciate the vid it was helpful and easy filling you thanks!!!
Thanks a lot. This really helped
Thank you...going to fix my 04 suburban
JUST WHAT I NEEDED SOME A HOLE TRYED TO GET INTO MY TRUCK LAST NIGHT DID NOT GET IN BUT BROKE HANDLE WHEN THEY PUNCHED CYLINDER THROUGH
I don’t remember but does it have a key on the hatch door? If not you could try using a slim jim and as a last resort get a lock smith.
Aren’t you supposed to take it apart first and then put it back together seems like that’s the right sequence to show your viewers
Ideally yes but at the time I made this I couldn't find any video or instructions on how to do it. So I had to tear the door apart before I figured out how to do it. I didn't want to film all of the trial and error but once I figured it out then I filmed info to help anyone attempting it from scratch. I could have put it all back together and shown the tear down in the correct sequence but that felt like too much work at the time, sorry.
Hey there. I replaced the driver side handle, and got everything connected. I closed the door to test it before fully connecting the the panel back on. The door didn’t open, so I went in to open from inside and it didn’t open either. Now I’m stuck. Any ideas? Thanks!
How’d you get it open with the lock pushed in my sister tried to unlock her Tahoe and the lock was loose I guess and she pushed it in
We got in from the passengers side and crawled over to the drivers side. With my car I was able to unlock the drivers door and open it. The clicker might work to unlock it too. Once unlocked the door should open with the outside handle.
@@FlyingMonkeyMedia she has a weird model where she has no other key hole to open anything and for some reason her battery decides to die randomly so do you think there’s a way to open it from the outside
@@abrahamalonzo2602I’m wondering the same question but this douchebag decided to quit answering your questions 😂😂😂😂
My Yukon battery died…. I have no key hole since I bought the damn thing…I’ve been needing to get that key hold replace but today, my Yukon battery died so now what?😂😂😂😂😂
Very helpful to me today... That darn 3rd bolt. Im not the most clever in this way.. Tend to just get mad instead. Thank you
Happened to me yesterday.... We have the same Arlington Texas sticker!
Yes my cylinder lock broke, someone also broke into my Tahoe, I had to buy the door plate and the cylinder lock, I just need to take it to a locksmith and get it coded, on my Tahoe the door plate where to cylinder was at was cracked and the cylinder was done… the key won’t even go inside…
Same shit happened to me. Now I’m watching this video
Where did you order the handle from?
What are you doing??? you just erase your gasket! LOL
Like I said, I couldn't find anything online to tell me how to do it so I had to do some destructive disassembly to figure it out. In retrospect I know how to do it know. Hopefully you can see past my mistakes and do it correctly.
My tahoe has same texas sticker 👍🏾 and im from cali haha
I need this in both my doors 🫠😤
Someone did the same thing to.my truck last night and nobody will.help.me out
You did not show much
I thought you were gonna show me how to get back in the truck
I don't know the exact condition of your door handle. I couldn't get into my Tahoe with the broken handle from the drivers side so I got into it from the passengers side. I could exit the vehicle using the inside drivers side door handle but I couldn't get back in until I fixed it like in the video. It was a huge inconvenience for about 10 days until I figured out what part to order and how to do the repair. When I fixed mine there was no video on TH-cam that I could find to do it so that's why I made and posted the video so others wouldn't have to figure it out from scratch.
Ohhh thank you I appreciate that alot. I only have one keyhole and they did the exact same thing to my door. I've watched a few videos and ima try to wedge it open from the top.
@@jarrodloran1 I guess we have different model. Mine had the clicker to unlock all the doors so I could get in from anywhere. What about the hatch? Mine has a key unlock on the hatch. If yours has the same you could get into the car that way.
If I recall there is no key hoke back there but that is a phenomenal idea!!! I can't believe I didn't think of that I'm try it now.
Hey there. I replaced the driver side handle, and got everything connected. I closed the door to test it before fully connecting the the panel back on. The door didn’t open, so I went in to open from inside and it didn’t open either. Now I’m stuck. Any ideas? Thanks!
All the door handle does is pull that rod up. I know you can't see much inside the door panel but you'll have to figure out why it isn't pulling the rod up high enough. Maybe your door handle is damaged somehow or maybe the rod is bent. Without being able to see it it is really hard to say what the problem is. Good luck..