ฝัง
- เผยแพร่เมื่อ 9 ม.ค. 2020
- Hy There,
In this video i show how easy is to blacken steel with spacial solution you can buy here:
www.chronos.ltd.uk/product-ca...
Other protection for steel and aluminium:
www.chronos.ltd.uk/product-ca...
KIT CONTAINS ALL ITEMS NEEDED TO BLACKEN STEEL ITEMS
THE KIT USES JUST CHEMICAL ACTION TO TURN STEEL ITEMS BLACK WITHIN A FEW MINUTES JUST BY DIPPING THE ITEM INTO THE BLACKENING SOLUTION
THIS PROCESS WILL ALSO WORK FOR ITEMS THAT HAVE BEEN PREVIOUSLY PLATED WITH ZINC *
* (NOT YELLOW PASSIVATED ZINC)
THE BLACKENED STEEL ITEMS WILL NEED TO BE TREATED AFTER DIPPING WITH DEWATERING OIL, OR OTHER FORM OF OIL, VARNISH, LAQUER OR OTHER BARRIER TO PREVENT RUSTING AS THE BLACK LAYER OFFERS VERY LITTLE PROTECTION FROM ATMOSPHERIC ATTACK
KIT CONTENTS
BLACK DIPPING TANK, METAL BLACKING SOLUTION 5 L, MASK, GLOVES, EYE PROTECTION GLASSES, CLEANING CLOTH AND INSTRUCTIONS
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
/ @tinesedej8137
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from TH-cam audiolibrarry:
1: Free Dog - Silent Partner
2: Give - Silent Partner
3: Once - Silent Partner
4: Well Worth the Wait - Silent Partner - วิทยาศาสตร์และเทคโนโลยี
Good work. The blackening agent worked great.
Nice video Tine! Keep going👍
Nice, very nice, and usefull tip.
Cool work sir 👍👏
Good stuff and Chronos is a good reliable firm.
They surely aint cheap . . . Maybe i am just too poor to buy 20 screws for 4€,that usualy cost 10€cents per one/2€ for 20.
@@zumbazumba1 True, i buy from them lot of tool before banggood and other chineese start selling really cheap.
@@TinC33 Yea but bangood and ebay china are lottery -sometimes you get real deal for super cheap-sometimes you get useless crap.Good thing is most of time you get money back.
99% of time anything made of "hss"is usualy made of cheap soft steel.
@@zumbazumba1 True, offcorse chronos sell another level quality tool, but as you say, sometimes it's the same from china, when it's hoing about hss like drills, mills, thread cutters, i prefer on a brand for industrial use, lot of people sell those stuff on internet for cheap, i buy 20mm 6 flute mill known brand for 20€ (new) than i find price on internet it was ower 500€
@@TinC33 Go check gypsys -i bought 250€
worthy german made hss 10%co roughing endmill for 3€.It was a bit rusty ,some surface rust but still sharp and maybe used once.
Another one was m20 and m16 taps brand new also german for 5€ both.
You can find crazy things for cheap on those bazzars.If you know what to look for and how to bargain.
Unfortunatly mine is 30 km away so i dont go often,but every time i find something.
It is very nice
This time you done it better and faster👍 I just watched Chronos website and the have some cool stuff.
That grey bottle in your oxy kit confused me, is the Roxy Kit or the Roxy 400?
it's roxy kit but i make "upgrade" after second bottle of oxygen was empty and need to buy new one. Now i got 2 of this 0,67L bottle and can refill them on any big bottle
th-cam.com/video/Atpn4vGB5lc/w-d-xo.html
@@TinC33 Ah yeah! I remember now, I saw that video already. My roxy is servicing well all this years maybe I need a similar solution but I use it just a little, one or two oxygen bottles each year. Thanks for the info anyway.
@@isidoromaich7226 than it's ok, but i used 2 bottles in a month, so i make this mod, but use roxy much much less, since i buy basic gas burner for 20€ gas is cheap and the flame was bigger, so it heat better even if the temperature is much lower, you can see it when i blackening the big piece into video about rotary table mounting plate...
it's a nice
can this process leave a sulfur smell on the steel? and how to remove it
Slovenc? A majo to kje slučajn u sloveniji? Restavriram en bajonet od jugoslovanske vojne pa sm pr brušenju zbrusu to stvar črno dol, zdj bi pa rd nazaj potemniu a kako bi reku temu. A se to da kje dobit u sloveniji?
Thanks for the video, how resistant is it to scratches or impacts?
Not much i prefere hot process of blackening by using fluxseed oil... Biger parts blackening cold and then still apply layer of oil and just heat a bit to make at least some protection
Damn, I was hoping to use it for a suit of armour for buhurt
Damn wish i could find that solution to protect my car parts especially the bolts around the engine area
Can we use for SS316
Can I use this product in cast iron kitchen vessels for blakening?
I don't know if it got some protective surface coat i doubt it will work
Can slight spills on bare steel be removed with another chemical?
I've heard rust strippers should remove the coating. Since it is a form of rust.
Is it CuSe copper selenium should we mix chemical with water or use directly
I use them directly that's what manual says
Can this be brushed on instead of dipped in whole?
It can but i don't know if the surface will be evenly blacked.
Can i use this for metal
Sure
I think I'll try this in future times.
How does it work on high alloyed steel?
Untill now I clean the parts in hydrochloric acid an then drop them into phosphoric acid.
Works good with low alloyed steel, but on high alloyes steel it does not work, it just gets not coloured.
I don't know on what type of steel i try but i try on different types from soft and hard steel (for making cylinders) but alwqys got nice result, the only problem here is that it doesn't offer any antirust protection.
@@TinC33 Thanks, I only blackenig the steel for the look, not for rust protection. But it is better than nothing.
Ya wont get 100% rust protection from any coating.
Sooner or later it will rust.
If that is really necessary use stainless steel A4 or better - titanium.
But if ya want to delay the rust, polish the steel to a mirror finish and then wipe some oil on it.
The smooth surface will rust not so fast or nearly not than a coarse.
I have a very old (about 50 years) highly polished bearing puller that looks like new and have nearly no rust on it.
@@BLECHHAUS true, for good rust protectin we use hot solder protection but it cost just like steel price per kg, but for home use like pins to hook tractor mower, rotator and other tools well they,r protected enough with hot blacking, so heat them and drop to fluxseed oil, that process make enough protection so they don't rust, but anyway they always in use so suface rust wipe away when change the tool.
But with hot blacking i never got so nice surface as with that solution.
@@TinC33 I knew the process of oilburning (ölbrennen) or blackburning (schwarzbrennen) but the disadvantage is, tht ya have to heat up the workpiece.
But what is "hot solder protection"??
What stuff do you use for that process??
@@BLECHHAUS we call that process bruniranje.
With hot solder i think hot galvanizing, but galwanizing is "wide word" when you make some product send it to galvanizing and they drop it into melted solder, i think about 800 degree, and it make thin protective surface wich offer protective almost forever, but the price is 1€ per kg so if the product got 50kg, galvanizing cost 50e.
Big minus from refusal to ship outside of UK
I want to buy
Follow the link into video description
What name chemical liquid sir?
there are link under video description, it's called "Steel Blacking Kit 5 Litres"
My local store
Mobail nabar
it's just cold blue, not a very good choice for protecting the surface
even the blowtorch and motor oil method is better than cold blue
I think so, that solution make surface only black no protecting at all, so all protection is a thin layer of oil, hot method is much better for protection, but for inside use like tool and stuff i will use that think, because it make much nicier surface, and i got no moisture in workshop, so no problem at all
Could this be used on galvanised steel or would it remove the galvanised layer?
I'm not sure, but i think it only work on raw steel, and galvanization offer much better protection.
Is this blackening solution rust resistant?